|``make test[\#TestSpecificName]`` | run unit test |
|``make test-sqlite[\#TestSpecificName]``| run [integration](integrations) test for SQLite |
|``make test-sqlite[\#TestSpecificName]``| run [integration](integrations) test for SQLite |
|[More details about integrations](integrations/README.md) |
## Vendoring
@ -127,14 +127,14 @@ the *[How to get faster PR reviews](https://github.com/kubernetes/community/blob
it has lots of useful tips for any project you may want to contribute.
Some of the key points:
* Make small pull requests. The smaller, the faster to review and the
- Make small pull requests. The smaller, the faster to review and the
more likely it will be merged soon.
* Don't make changes unrelated to your PR. Maybe there are typos on
- Don't make changes unrelated to your PR. Maybe there are typos on
some comments, maybe refactoring would be welcome on a function... but
if that is not related to your PR, please make *another* PR for that.
* Split big pull requests into multiple small ones. An incremental change
- Split big pull requests into multiple small ones. An incremental change
will be faster to review than a huge PR.
* Use the first comment as a summary explainer of your PR and you should keep this up-to-date as the PR evolves.
- Use the first comment as a summary explainer of your PR and you should keep this up-to-date as the PR evolves.
If your PR could cause a breaking change you must add a BREAKING section to this comment e.g.:
@ -146,7 +146,8 @@ To explain how this could affect users and how to mitigate these changes.
## Styleguide
For imports you should use the following format (_without_ the comments)
For imports you should use the following format (*without* the comments)
```go
import (
// stdlib
@ -181,11 +182,15 @@ To maintain understandable code and avoid circular dependencies it is important
## API v1
The API is documented by [swagger](http://try.gitea.io/api/swagger) and is based on [GitHub API v3](https://developer.github.com/v3/).
Thus, Gitea´s API should use the same endpoints and fields as GitHub´s API as far as possible, unless there are good reasons to deviate.
If Gitea provides functionality that GitHub does not, a new endpoint can be created.
Thus, Gitea´s API should use the same endpoints and fields as GitHub´s API as far as possible, unless there are good reasons to deviate.
If Gitea provides functionality that GitHub does not, a new endpoint can be created.
If information is provided by Gitea that is not provided by the GitHub API, a new field can be used that doesn't collide with any GitHub fields.
Updating an existing API should not remove existing fields unless there is a really good reason to do so.
The same applies to status responses. If you notice a problem, feel free to leave a comment in the code for future refactoring to APIv2 (which is currently not planned).
All expected results (errors, success, fail messages) should be documented
@ -194,28 +199,33 @@ All expected results (errors, success, fail messages) should be documented
All JSON input types must be defined as a struct in [modules/structs/](modules/structs/)
* **GET** endpoints return requested object and status **OK (200)**
* **DELETE** endpoints return status **No Content (204)**
* **POST** endpoints return status **Created (201)**, used to **create** new objects (e.g. a User)
* **PUT** endpoints return status **No Content (204)**, used to **add/assign** existing Objects (e.g. User) to something (e.g. Org-Team)
* **PATCH** endpoints return changed object and status **OK (200)**, used to **edit/change** an existing object
- **GET** endpoints return requested object and status **OK (200)**
- **DELETE** endpoints return status **No Content (204)**
- **POST** endpoints return status **Created (201)**, used to **create** new objects (e.g. a User)
- **PUT** endpoints return status **No Content (204)**, used to **add/assign** existing Objects (e.g. User) to something (e.g. Org-Team)
- **PATCH** endpoints return changed object and status **OK (200)**, used to **edit/change** an existing object
An endpoint which changes/edits an object expects all fields to be optional (except ones to identify the object, which are required).
### Endpoints returning lists should
* support pagination (`page` &`limit` options in query)
* set `X-Total-Count` header via **SetTotalCountHeader** ([example](https://github.com/go-gitea/gitea/blob/7aae98cc5d4113f1e9918b7ee7dd09f67c189e3e/routers/api/v1/repo/issue.go#L444))
- support pagination (`page` &`limit` options in query)
- set `X-Total-Count` header via **SetTotalCountHeader** ([example](https://github.com/go-gitea/gitea/blob/7aae98cc5d4113f1e9918b7ee7dd09f67c189e3e/routers/api/v1/repo/issue.go#L444))
## Large Character Comments
@ -368,35 +378,35 @@ and lead the development of Gitea.
To honor the past owners, here's the history of the owners and the time
@ -413,20 +423,20 @@ be reviewed by two maintainers and must pass the automatic tests.
## Releasing Gitea
* Let $vmaj, $vmin and $vpat be Major, Minor and Patch version numbers, $vpat should be rc1, rc2, 0, 1, ...... $vmaj.$vmin will be kept the same as milestones on github or gitea in future.
* Before releasing, confirm all the version's milestone issues or PRs has been resolved. Then discuss the release on Discord channel #maintainers and get agreed with almost all the owners and mergers. Or you can declare the version and if nobody against in about serval hours.
* If this is a big version first you have to create PR for changelog on branch `main` with PRs with label `changelog` and after it has been merged do following steps:
* Create `-dev` tag as `git tag -s -F release.notes v$vmaj.$vmin.0-dev` and push the tag as `git push origin v$vmaj.$vmin.0-dev`.
* When CI has finished building tag then you have to create a new branch named `release/v$vmaj.$vmin`
* If it is bugfix version create PR for changelog on branch `release/v$vmaj.$vmin` and wait till it is reviewed and merged.
* Add a tag as `git tag -s -F release.notes v$vmaj.$vmin.$`, release.notes file could be a temporary file to only include the changelog this version which you added to `CHANGELOG.md`.
* And then push the tag as `git push origin v$vmaj.$vmin.$`. Drone CI will automatically create a release and upload all the compiled binary. (But currently it doesn't add the release notes automatically. Maybe we should fix that.)
* If needed send a frontport PR for the changelog to branch `main` and update the version in `docs/config.yaml` to refer to the new version.
* Send PR to [blog repository](https://gitea.com/gitea/blog) announcing the release.
* Verify all release assets were correctly published through CI on dl.gitea.io and GitHub releases. Once ACKed:
* bump the version of https://dl.gitea.io/gitea/version.json
* merge the blog post PR
* announce the release in discord `#announcements`
- Let $vmaj, $vmin and $vpat be Major, Minor and Patch version numbers, $vpat should be rc1, rc2, 0, 1, ...... $vmaj.$vmin will be kept the same as milestones on github or gitea in future.
- Before releasing, confirm all the version's milestone issues or PRs has been resolved. Then discuss the release on Discord channel #maintainers and get agreed with almost all the owners and mergers. Or you can declare the version and if nobody against in about serval hours.
- If this is a big version first you have to create PR for changelog on branch `main` with PRs with label `changelog` and after it has been merged do following steps:
- Create `-dev` tag as `git tag -s -F release.notes v$vmaj.$vmin.0-dev` and push the tag as `git push origin v$vmaj.$vmin.0-dev`.
- When CI has finished building tag then you have to create a new branch named `release/v$vmaj.$vmin`
- If it is bugfix version create PR for changelog on branch `release/v$vmaj.$vmin` and wait till it is reviewed and merged.
- Add a tag as `git tag -s -F release.notes v$vmaj.$vmin.$`, release.notes file could be a temporary file to only include the changelog this version which you added to `CHANGELOG.md`.
- And then push the tag as `git push origin v$vmaj.$vmin.$`. Drone CI will automatically create a release and upload all the compiled binary. (But currently it doesn't add the release notes automatically. Maybe we should fix that.)
- If needed send a frontport PR for the changelog to branch `main` and update the version in `docs/config.yaml` to refer to the new version.
- Send PR to [blog repository](https://gitea.com/gitea/blog) announcing the release.
- Verify all release assets were correctly published through CI on dl.gitea.io and GitHub releases. Once ACKed:
- bump the version of https://dl.gitea.io/gitea/version.json
- merge the blog post PR
- announce the release in discord `#announcements`
Translations are done through Crowdin. If you want to translate to a new language ask one of the managers in the Crowdin project to add a new language there.
Translations are done through Crowdin. If you want to translate to a new language ask one of the managers in the Crowdin project to add a new language there.
You can also just create an issue for adding a language or ask on discord on the #translation channel. If you need context or find some translation issues, you can leave a comment on the string or ask on Discord. For general translation questions there is a section in the docs. Currently a bit empty but we hope to fill it as questions pop up.
For more information and instructions about how to install Gitea, please look at our [documentation](https://docs.gitea.io/en-us/).
If you have questions that are not covered by the documentation, you can get in contact with us on our [Discord server](https://discord.gg/Gitea) or create a post in the [discourse forum](https://discourse.gitea.io/).
We maintain a list of Gitea-related projects at [gitea/awesome-gitea](https://gitea.com/gitea/awesome-gitea).
The Hugo-based documentation theme is hosted at [gitea/theme](https://gitea.com/gitea/theme).
We maintain a list of Gitea-related projects at [gitea/awesome-gitea](https://gitea.com/gitea/awesome-gitea).
The Hugo-based documentation theme is hosted at [gitea/theme](https://gitea.com/gitea/theme).
The official Gitea CLI is developed at [gitea/tea](https://gitea.com/gitea/tea).
@ -152,6 +152,7 @@ Values containing `#` or `;` must be quoted using `` ` `` or `"""`.
Configuration for set the expected MIME type based on file extensions of downloadable files. Configuration presents in key-value pairs and file extensions starts with leading `.`.
The following configuration set `Content-Type: application/vnd.android.package-archive` header when downloading files with `.apk` file extension.
```ini
.apk=application/vnd.android.package-archive
```
@ -248,11 +249,11 @@ The following configuration set `Content-Type: application/vnd.android.package-a
Requests are then made as `%(ROOT_URL)s/static/css/index.css` and `https://cdn.example.com/css/index.css` respective.
The static files are located in the `public/` directory of the Gitea source repository.
- `HTTP_ADDR`: **0.0.0.0**: HTTP listen address.
- If `PROTOCOL` is set to `fcgi`, Gitea will listen for FastCGI requests on TCP socket
- If `PROTOCOL` is set to `fcgi`, Gitea will listen for FastCGI requests on TCP socket
defined by `HTTP_ADDR` and `HTTP_PORT` configuration settings.
- If `PROTOCOL` is set to `http+unix` or `fcgi+unix`, this should be the name of the Unix socket file to use. Relative paths will be made absolute against the AppWorkPath.
- If `PROTOCOL` is set to `http+unix` or `fcgi+unix`, this should be the name of the Unix socket file to use. Relative paths will be made absolute against the AppWorkPath.
- `HTTP_PORT`: **3000**: HTTP listen port.
- If `PROTOCOL` is set to `fcgi`, Gitea will listen for FastCGI requests on TCP socket
- If `PROTOCOL` is set to `fcgi`, Gitea will listen for FastCGI requests on TCP socket
defined by `HTTP_ADDR` and `HTTP_PORT` configuration settings.
- `UNIX_SOCKET_PERMISSION`: **666**: Permissions for the Unix socket.
- `LOCAL_ROOT_URL`: **%(PROTOCOL)s://%(HTTP_ADDR)s:%(HTTP_PORT)s/**: Local
@ -370,16 +371,16 @@ The following configuration set `Content-Type: application/vnd.android.package-a
(e.g. `ALTER USER user SET SEARCH_PATH = schema_name,"$user",public;`).
- `SSL_MODE`: **disable**: SSL/TLS encryption mode for connecting to the database. This option is only applied for PostgreSQL and MySQL.
- Valid values for MySQL:
- `true`: Enable TLS with verification of the database server certificate against its root certificate. When selecting this option make sure that the root certificate required to validate the database server certificate (e.g. the CA certificate) is on the system certificate store of both the database and Gitea servers. See your system documentation for instructions on how to add a CA certificate to the certificate store.
- `false`: Disable TLS.
- `disable`: Alias for `false`, for compatibility with PostgreSQL.
- `skip-verify`: Enable TLS without database server certificate verification. Use this option if you have self-signed or invalid certificate on the database server.
- `prefer`: Enable TLS with fallback to non-TLS connection.
- `true`: Enable TLS with verification of the database server certificate against its root certificate. When selecting this option make sure that the root certificate required to validate the database server certificate (e.g. the CA certificate) is on the system certificate store of both the database and Gitea servers. See your system documentation for instructions on how to add a CA certificate to the certificate store.
- `false`: Disable TLS.
- `disable`: Alias for `false`, for compatibility with PostgreSQL.
- `skip-verify`: Enable TLS without database server certificate verification. Use this option if you have self-signed or invalid certificate on the database server.
- `prefer`: Enable TLS with fallback to non-TLS connection.
- Valid values for PostgreSQL:
- `disable`: Disable TLS.
- `require`: Enable TLS without any verifications.
- `verify-ca`: Enable TLS with verification of the database server certificate against its root certificate.
- `verify-full`: Enable TLS and verify the database server name matches the given certificate in either the `Common Name` or `Subject Alternative Name` fields.
- `disable`: Disable TLS.
- `require`: Enable TLS without any verifications.
- `verify-ca`: Enable TLS with verification of the database server certificate against its root certificate.
- `verify-full`: Enable TLS and verify the database server name matches the given certificate in either the `Common Name` or `Subject Alternative Name` fields.
- `SQLITE_TIMEOUT`: **500**: Query timeout for SQLite3 only.
- `ITERATE_BUFFER_SIZE`: **50**: Internal buffer size for iterating.
- `CHARSET`: **utf8mb4**: For MySQL only, either "utf8" or "utf8mb4". NOTICE: for "utf8mb4" you must use MySQL InnoDB > 5.6. Gitea is unable to check this.
@ -509,11 +510,11 @@ Certain queues have defaults that override the defaults set in `[queue]` (this o
- `CSRF_COOKIE_HTTP_ONLY`: **true**: Set false to allow JavaScript to read CSRF cookie.
- `MIN_PASSWORD_LENGTH`: **6**: Minimum password length for new users.
- `PASSWORD_COMPLEXITY`: **off**: Comma separated list of character classes required to pass minimum complexity. If left empty or no valid values are specified, checking is disabled (off):
- lower - use one or more lower latin characters
- upper - use one or more upper latin characters
- digit - use one or more digits
- spec - use one or more special characters as ``!"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~``
- off - do not check password complexity
- lower - use one or more lower latin characters
- upper - use one or more upper latin characters
- digit - use one or more digits
- spec - use one or more special characters as ``!"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~``
- off - do not check password complexity
- `PASSWORD_CHECK_PWN`: **false**: Check [HaveIBeenPwned](https://haveibeenpwned.com/Passwords) to see if a password has been exposed.
- `SUCCESSFUL_TOKENS_CACHE_SIZE`: **20**: Cache successful token hashes. API tokens are stored in the DB as pbkdf2 hashes however, this means that there is a potentially significant hashing load when there are multiple API operations. This cache will store the successfully hashed tokens in a LRU cache as a balance between performance and security.
@ -535,18 +536,18 @@ Certain queues have defaults that override the defaults set in `[queue]` (this o
## OAuth2 Client (`oauth2_client`)
- `REGISTER_EMAIL_CONFIRM`: *[service]***REGISTER\_EMAIL\_CONFIRM**: Set this to enable or disable email confirmation of OAuth2 auto-registration. (Overwrites the REGISTER\_EMAIL\_CONFIRM setting of the `[service]` section)
- `REGISTER_EMAIL_CONFIRM`: _[service]_**REGISTER\_EMAIL\_CONFIRM**: Set this to enable or disable email confirmation of OAuth2 auto-registration. (Overwrites the REGISTER\_EMAIL\_CONFIRM setting of the `[service]` section)
- `OPENID_CONNECT_SCOPES`: **\<empty\>**: List of additional openid connect scopes. (`openid` is implicitly added)
- `ENABLE_AUTO_REGISTRATION`: **false**: Automatically create user accounts for new oauth2 users.
- `USERNAME`: **nickname**: The source of the username for new oauth2 accounts:
- userid - use the userid / sub attribute
- nickname - use the nickname attribute
- email - use the username part of the email attribute
- userid - use the userid / sub attribute
- nickname - use the nickname attribute
- email - use the username part of the email attribute
- `UPDATE_AVATAR`: **false**: Update avatar if available from oauth2 provider. Update will be performed on each login.
- `ACCOUNT_LINKING`: **login**: How to handle if an account / email already exists:
- disabled - show an error
- login - show an account linking login
- auto - automatically link with the account (Please be aware that this will grant access to an existing account just because the same username or email is provided. You must make sure that this does not cause issues with your authentication providers.)
- disabled - show an error
- login - show an account linking login
- auto - automatically link with the account (Please be aware that this will grant access to an existing account just because the same username or email is provided. You must make sure that this does not cause issues with your authentication providers.)
## Service (`service`)
@ -656,23 +657,23 @@ Define allowed algorithms and their minimum key length (use -1 to disable a type
- `ENVELOPE_FROM`: **\<empty\>**: Address set as the From address on the SMTP mail envelope. Set to `<>` to send an empty address.
- `USER`: **\<empty\>**: Username of mailing user (usually the sender's e-mail address).
- `PASSWD`: **\<empty\>**: Password of mailing user. Use \`your password\` for quoting if you use special characters in the password.
- Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via `STARTTLS`) or `HOST=localhost`. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
- Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via `STARTTLS`) or `HOST=localhost`. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
- `SEND_AS_PLAIN_TEXT`: **false**: Send mails as plain text.
- `SKIP_VERIFY`: **false**: Whether or not to skip verification of certificates; `true` to disable verification.
- **Warning:** This option is unsafe. Consider adding the certificate to the system trust store instead.
- **Note:** Gitea only supports SMTP with STARTTLS.
- **Warning:** This option is unsafe. Consider adding the certificate to the system trust store instead.
- **Note:** Gitea only supports SMTP with STARTTLS.
- `USE_CERTIFICATE`: **false**: Use client certificate.
- `CERT_FILE`: **custom/mailer/cert.pem**
- `KEY_FILE`: **custom/mailer/key.pem**
- `SUBJECT_PREFIX`: **\<empty\>**: Prefix to be placed before e-mail subject lines.
- **sendmail** Use the operating system's `sendmail` command instead of SMTP.
- **smtp** Use SMTP to send mail
- **sendmail** Use the operating system's `sendmail` command instead of SMTP.
This is common on Linux systems.
- **dummy** Send email messages to the log as a testing phase.
- Note that enabling sendmail will ignore all other `mailer` settings except `ENABLED`,
- **dummy** Send email messages to the log as a testing phase.
- Note that enabling sendmail will ignore all other `mailer` settings except `ENABLED`,
`FROM`, `SUBJECT_PREFIX` and `SENDMAIL_PATH`.
- Enabling dummy will ignore all settings except `ENABLED`, `SUBJECT_PREFIX` and `FROM`.
- Enabling dummy will ignore all settings except `ENABLED`, `SUBJECT_PREFIX` and `FROM`.
- `SENDMAIL_PATH`: **sendmail**: The location of sendmail on the operating system (can be
command or full path).
- `SENDMAIL_ARGS`: **_empty_**: Specify any extra sendmail arguments. (NOTE: you should be aware that email addresses can look like options - if your `sendmail` command takes options you must set the option terminator `--`)
@ -686,9 +687,9 @@ Define allowed algorithms and their minimum key length (use -1 to disable a type
- `ADAPTER`: **memory**: Cache engine adapter, either `memory`, `redis`, `twoqueue` or `memcache`. (`twoqueue` represents a size limited LRU cache.)
- `INTERVAL`: **60**: Garbage Collection interval (sec), for memory and twoqueue cache only.
- `HOST`: **\<empty\>**: Connection string for `redis` and `memcache`. For `twoqueue` sets configuration for the queue.
- TwoQueue LRU cache: `{"size":50000,"recent_ratio":0.25,"ghost_ratio":0.5}` or `50000` representing the maximum number of objects stored in the cache.
- TwoQueue LRU cache: `{"size":50000,"recent_ratio":0.25,"ghost_ratio":0.5}` or `50000` representing the maximum number of objects stored in the cache.
- `ITEM_TTL`: **16h**: Time to keep items in cache if not used, Setting it to -1 disables caching.
@ -731,7 +732,6 @@ Define allowed algorithms and their minimum key length (use -1 to disable a type
- image = default image will be used (which is set in `REPOSITORY_AVATAR_FALLBACK_IMAGE`)
- `REPOSITORY_AVATAR_FALLBACK_IMAGE`: **/img/repo_default.png**: Image used as default repository avatar (if `REPOSITORY_AVATAR_FALLBACK` is set to image and none was uploaded)
## Project (`project`)
Default templates for project boards:
@ -766,11 +766,13 @@ Default templates for project boards:
- `ENABLE_XORM_LOG`: **true**: Set whether to perform XORM logging. Please note SQL statement logging can be disabled by setting `LOG_SQL` to false in the `[database]` section.
### Router Log (`log`)
- `DISABLE_ROUTER_LOG`: **false**: Mute printing of the router log.
- `ROUTER`: **console**: The mode or name of the log the router should log to. (If you set this to `,` it will log to default Gitea logger.)
NB: You must have `DISABLE_ROUTER_LOG` set to `false` for this option to take effect. Configure each mode in per mode log subsections `\[log.modename.router\]`.
### Access Log (`log`)
- `ENABLE_ACCESS_LOG`: **false**: Creates an access.log in NCSA common log format, or as per the following template
- `ACCESS`: **file**: Logging mode for the access logger, use a comma to separate values. Configure each mode in per mode log subsections `\[log.modename.access\]`. By default the file mode will log to `$ROOT_PATH/access.log`. (If you set this to `,` it will log to the default Gitea logger.)
- `ACCESS_LOG_TEMPLATE`: **`{{.Ctx.RemoteAddr}} - {{.Identity}} {{.Start.Format "[02/Jan/2006:15:04:05 -0700]" }} "{{.Ctx.Req.Method}} {{.Ctx.Req.URL.RequestURI}} {{.Ctx.Req.Proto}}" {{.ResponseWriter.Status}} {{.ResponseWriter.Size}} "{{.Ctx.Req.Referer}}\" \"{{.Ctx.Req.UserAgent}}"`**: Sets the template used to create the access log.
@ -828,9 +830,9 @@ Default templates for project boards:
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE` accept formats
- Full crontab specs, e.g. `* * * * * ?`
- Descriptors, e.g. `@midnight`, `@every 1h30m` ...
- See more: [cron decument](https://pkg.go.dev/github.com/gogs/cron@v0.0.0-20171120032916-9f6c956d3e14)
- Full crontab specs, e.g. `* * * * * ?`
- Descriptors, e.g. `@midnight`, `@every 1h30m` ...
- See more: [cron decument](https://pkg.go.dev/github.com/gogs/cron@v0.0.0-20171120032916-9f6c956d3e14)
### Basic cron tasks - enabled by default
@ -887,6 +889,7 @@ Default templates for project boards:
### Extended cron tasks (not enabled by default)
#### Cron - Garbage collect all repositories ('cron.git_gc_repos')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
@ -895,36 +898,42 @@ Default templates for project boards:
- `ARGS`: **\<empty\>**: Arguments for command `git gc`, e.g. `--aggressive --auto`. The default value is same with [git] -> GC_ARGS
#### Cron - Update the '.ssh/authorized_keys' file with Gitea SSH keys ('cron.resync_all_sshkeys')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Resynchronize pre-receive, update and post-receive hooks of all repositories ('cron.resync_all_hooks')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Reinitialize all missing Git repositories for which records exist ('cron.reinit_missing_repos')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Delete all repositories missing their Git files ('cron.delete_missing_repos')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Delete all old actions from database ('cron.delete_old_actions')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
@ -932,6 +941,7 @@ Default templates for project boards:
- `OLDER_THAN`: **@every 8760h**: any action older than this expression will be deleted from database, suggest using `8760h` (1 year) because that's the max length of heatmap.
#### Cron - Check for new Gitea versions ('cron.update_checker')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `ENABLE_SUCCESS_NOTICE`: **true**: Set to false to switch off success notices.
@ -939,6 +949,7 @@ Default templates for project boards:
- `HTTP_ENDPOINT`: **https://dl.gitea.io/gitea/version.json**: the endpoint that Gitea will check for newer versions
#### Cron - Delete all old system notices from database ('cron.delete_old_system_notices')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NO_SUCCESS_NOTICE`: **false**: Set to true to switch off success notices.
@ -949,7 +960,7 @@ Default templates for project boards:
- `PATH`: **""**: The path of Git executable. If empty, Gitea searches through the PATH environment.
- `HOME_PATH`: **%(APP_DATA_PATH)/home**: The HOME directory for Git.
This directory will be used to contain the `.gitconfig` and possible `.gnupg` directories that Gitea's git calls will use. If you can confirm Gitea is the only application running in this environment, you can set it to the normal home directory for Gitea user.
This directory will be used to contain the `.gitconfig` and possible `.gnupg` directories that Gitea's git calls will use. If you can confirm Gitea is the only application running in this environment, you can set it to the normal home directory for Gitea user.
- `DISABLE_DIFF_HIGHLIGHT`: **false**: Disables highlight of added and removed changes.
- `MAX_GIT_DIFF_LINES`: **1000**: Max number of lines allowed of a single file in diff view.
- `MAX_GIT_DIFF_LINE_CHARACTERS`: **5000**: Max character count per line highlighted in diff view.
@ -966,6 +977,7 @@ Default templates for project boards:
- `DISABLE_PARTIAL_CLONE`: **false** Disable the usage of using partial clones for git.
- iframe: Render the content in a separate standalone page and embed it into current page by iframe. The iframe is in sandbox mode with same-origin disabled, and the JS code are safely isolated from parent page.
Two special environment variables are passed to the render command:
- `GITEA_PREFIX_SRC`, which contains the current URL prefix in the `src` path tree. To be used as prefix for links.
- `GITEA_PREFIX_RAW`, which contains the current URL prefix in the `raw` path tree. To be used as prefix for image paths.
Display Office DOCX files with [`pandoc`](https://pandoc.org/):
```ini
[markup.docx]
ENABLED = true
@ -138,6 +139,7 @@ ALLOW_DATA_URI_IMAGES = true
```
The template file has the following content:
```
$body$
```
@ -145,6 +147,7 @@ $body$
### Example: Jupyter Notebook
Display Jupyter Notebook files with [`nbconvert`](https://github.com/jupyter/nbconvert):
```ini
[markup.jupyter]
ENABLED = true
@ -156,9 +159,11 @@ ALLOW_DATA_URI_IMAGES = true
```
## Customizing CSS
The external renderer is specified in the .ini in the format `[markup.XXXXX]` and the HTML supplied by your external renderer will be wrapped in a `<div>` with classes `markup` and `XXXXX`. The `markup` class provides out of the box styling (as does `markdown` if `XXXXX` is `markdown`). Otherwise you can use these classes to specifically target the contents of your rendered HTML.
The external renderer is specified in the .ini in the format `[markup.XXXXX]` and the HTML supplied by your external renderer will be wrapped in a `<div>` with classes `markup` and `XXXXX`. The `markup` class provides out of the box styling (as does `markdown` if `XXXXX` is `markdown`). Otherwise you can use these classes to specifically target the contents of your rendered HTML.
And so you could write some CSS:
```css
.markup.XXXXX html {
font-size: 100%;
@ -184,6 +189,7 @@ And so you could write some CSS:
```
Add your stylesheet to your custom directory e.g `custom/public/css/my-style-XXXXX.css` and import it using a custom header file `custom/templates/custom/header.tmpl`:
Protected tags allow control over who has permission to create or update Git tags. Each rule allows you to match either an individual tag name, or use an appropriate pattern to control multiple tags at once.
Protected tags allow control over who has permission to create or update Git tags. Each rule allows you to match either an individual tag name, or use an appropriate pattern to control multiple tags at once.
@ -37,7 +37,7 @@ For an existing remote repository, you can set up pull mirroring as follows:
3. Enter a repository URL.
4. If the repository needs authentication fill in your authentication information.
5. Check the box **This repository will be a mirror**.
5. Select **Migrate repository** to save the configuration.
6. Select **Migrate repository** to save the configuration.
The repository now gets mirrored periodically from the remote repository. You can force a sync by selecting **Synchronize Now** in the repository settings.
Gitea uses Golang as the backend programming language. It uses many third-party packages and also write some itself.
For example, Gitea uses [Chi](https://github.com/go-chi/chi) as basic web framework. [Xorm](https://xorm.io) is an ORM framework that is used to interact with the database.
Gitea uses Golang as the backend programming language. It uses many third-party packages and also write some itself.
For example, Gitea uses [Chi](https://github.com/go-chi/chi) as basic web framework. [Xorm](https://xorm.io) is an ORM framework that is used to interact with the database.
So it's very important to manage these packages. Please take the below guidelines before you start to write backend code.
## Package Design Guideline
@ -43,9 +43,9 @@ To maintain understandable code and avoid circular dependencies it is important
- `modules/git`: Package to interactive with `Git` command line or Gogit package.
- `routers`: Handling of server requests. As it uses other Gitea packages to serve the request, other packages (models, modules or services) must not depend on routers.
- `routers/api` Contains routers for `/api/v1` aims to handle RESTful API requests.
- `routers/install` Could only respond when system is in INSTALL mode (INSTALL_LOCK=false).
- `routers/private` will only be invoked by internal sub commands, especially `serv` and `hooks`.
- `routers/api` Contains routers for `/api/v1` aims to handle RESTful API requests.
- `routers/install` Could only respond when system is in INSTALL mode (INSTALL_LOCK=false).
- `routers/private` will only be invoked by internal sub commands, especially `serv` and `hooks`.
- `routers/web` will handle HTTP requests from web browsers or Git SMART HTTP protocols.
- `services`: Support functions for common routing operations or command executions. Uses `models` and `modules` to handle the requests.
- `templates`: Golang templates for generating the html output.
@ -61,7 +61,7 @@ From left to right, left packages could depend on right packages, but right pack
**NOTICE**
Why do we need database transactions outside of `models`? And how?
Some actions should allow for rollback when database record insertion/update/deletion failed.
Some actions should allow for rollback when database record insertion/update/deletion failed.
So services must be allowed to create a database transaction. Here is some example,
```go
@ -84,7 +84,7 @@ func CreateXXXX() error {\
}
```
You should **not** use `db.GetEngine(ctx)` in `services` directly, but just write a function under `models/`.
You should **not** use `db.GetEngine(ctx)` in `services` directly, but just write a function under `models/`.
If the function will be used in the transaction, just let `context.Context` as the function's first parameter.
The HTML pages are rendered by [Go HTML Template](https://pkg.go.dev/html/template).
The source files can be found in the following directories:
* **Less styles:**`web_src/less/`
* **JavaScript files:**`web_src/js/`
* **Vue components:**`web_src/js/components/`
@ -41,36 +42,37 @@ We recommend [Google HTML/CSS Style Guide](https://google.github.io/styleguide/h
2. HTML ids and classes should use kebab-case.
3. HTML ids and classes used in JavaScript should be unique for the whole project, and should contain 2-3 feature related keywords. We recommend to use the `js-` prefix for classes that are only used in JavaScript.
4. jQuery events across different features could use their own namespaces if there are potential conflicts.
5. CSS styling for classes provided by frameworks should not be overwritten. Always use new class-names with 2-3 feature related keywords to overwrite framework styles.
5. CSS styling for classes provided by frameworks should not be overwritten. Always use new class-names with 2-3 feature related keywords to overwrite framework styles.
6. The backend can pass complex data to the frontend by using `ctx.PageData["myModuleData"] = map[]{}`
7. Simple pages and SEO-related pages use Go HTML Template render to generate static Fomantic-UI HTML output. Complex pages can use Vue2 (or Vue3 in future).
### Framework Usage
Mixing different frameworks together is discouraged, it makes the code difficult to be maintained.
A JavaScript module should follow one major framework and follow the framework's best practice.
Recommended implementations:
* Vue + Vanilla JS
* Fomantic-UI (jQuery)
* Vanilla JS
Discouraged implementations:
* Vue + Fomantic-UI (jQuery)
* jQuery + Vanilla JS
To make UI consistent, Vue components can use Fomantic-UI CSS classes.
Although mixing different frameworks is discouraged,
it should also work if the mixing is necessary and the code is well-designed and maintainable.
Although mixing different frameworks is discouraged,
it should also work if the mixing is necessary and the code is well-designed and maintainable.
### `async` Functions
Only mark a function as `async` if and only if there are `await` calls
Only mark a function as `async` if and only if there are `await` calls
or `Promise` returns inside the function.
It's not recommended to use `async` event listeners, which may lead to problems.
The reason is that the code after await is executed outside the event dispatch.
The reason is that the code after await is executed outside the event dispatch.
- MSYS2 is a collection of tools and libraries providing you with an easy-to-use environment for building, installing and running native Windows software, it includes MinGW-w64.
- MSYS2 is a collection of tools and libraries providing you with an easy-to-use environment for building, installing and running native Windows software, it includes MinGW-w64.
- In MingGW-w64, the binary is called `mingw32-make.exe` instead of `make.exe`. Add the `bin` folder to `PATH`.
- In MSYS2, you can use `make` directly. See [MSYS2 Porting](https://www.msys2.org/wiki/Porting/).
- To compile Gitea with CGO_ENABLED (eg: SQLite3), you might need to use [tdm-gcc](https://jmeubank.github.io/tdm-gcc/) instead of MSYS2 gcc, because MSYS2 gcc headers lack some Windows-only CRT functions like `_beginthread`.
@ -212,7 +212,7 @@ SVG icons are built using the `make svg` target which compiles the icon sources
### Building the Logo
The PNG and SVG versions of the Gitea logo are built from a single SVG source file `assets/logo.svg` using the `TAGS="gitea" make generate-images` target. To run it, Node.js and npm must be available.
The PNG and SVG versions of the Gitea logo are built from a single SVG source file `assets/logo.svg` using the `TAGS="gitea" make generate-images` target. To run it, Node.js and npm must be available.
The same process can also be used to generate custom logo PNGs from a SVG source file by updating `assets/logo.svg` and running `make generate-images`. Omitting the `gitea` tag will update only the user-designated logo files.
@ -312,7 +312,6 @@ may need adjustment to the local environment.
Take a look at [`integrations/README.md`](https://github.com/go-gitea/gitea/blob/main/integrations/README.md)
for more information and how to run a single test.
### Testing for a PR
Our continuous integration will test the code passes its unit tests and that
@ -345,13 +344,13 @@ for more information.
## GoLand
Clicking the `Run Application` arrow on the function `func main()` in `/main.go`
Clicking the `Run Application` arrow on the function `func main()` in `/main.go`
can quickly start a debuggable Gitea instance.
The `Output Directory` in `Run/Debug Configuration` MUST be set to the
gitea project directory (which contains `main.go` and `go.mod`),
otherwise, the started instance's working directory is a GoLand's temporary directory
and prevents Gitea from loading dynamic resources (eg: templates) in a development environment.
The `Output Directory` in `Run/Debug Configuration` MUST be set to the
gitea project directory (which contains `main.go` and `go.mod`),
otherwise, the started instance's working directory is a GoLand's temporary directory
and prevents Gitea from loading dynamic resources (eg: templates) in a development environment.
To run unit tests with SQLite in GoLand, set `-tags sqlite,sqlite_unlock_notify`
in `Go tool arguments` of `Run/Debug Configuration`.
@ -34,6 +34,7 @@ Gitea supports acting as an OAuth2 provider to allow third party applications to
## Supported OAuth2 Grants
At the moment Gitea only supports the [**Authorization Code Grant**](https://tools.ietf.org/html/rfc6749#section-1.3.1) standard with additional support of the following extensions:
- [Proof Key for Code Exchange (PKCE)](https://tools.ietf.org/html/rfc7636)
@ -26,6 +26,8 @@ For changes to a **non-English** translation, refer to the Crowdin project above
Any language listed in the above Crowdin project will be supported as long as 25% or more has been translated.
After a translation has been accepted, it will be reflected in the main repository after the next Crowdin sync, which is generally after any PR is merged.
At the time of writing, this means that a changed translation may not appear until the following Gitea release.
After a translation has been accepted, it will be reflected in the main repository after the next Crowdin sync, which is generally after any PR is merged.
At the time of writing, this means that a changed translation may not appear until the following Gitea release.
If you use a bleeding edge build, it should appear as soon as you update after the change is synced.
This page contains some common questions and answers.
This page contains some common questions and answers.
For more help resources, check all [Support Options]({{< relref "doc/help/seek-help.en-us.md" >}}).
**Table of Contents**
@ -24,14 +25,18 @@ For more help resources, check all [Support Options]({{< relref "doc/help/seek-h
## Difference between 1.x and 1.x.x downloads
Version 1.7.x will be used for this example.
Version 1.7.x will be used for this example.
**NOTE:** this example applies to Docker images as well!
On our [downloads page](https://dl.gitea.io/gitea/) you will see a 1.7 directory, as well as directories for 1.7.0, 1.7.1, 1.7.2, 1.7.3, 1.7.4, 1.7.5, and 1.7.6.
The 1.7 and 1.7.0 directories are **not** the same. The 1.7 directory is built on each merged commit to the [`release/v1.7`](https://github.com/go-gitea/gitea/tree/release/v1.7) branch.
On our [downloads page](https://dl.gitea.io/gitea/) you will see a 1.7 directory, as well as directories for 1.7.0, 1.7.1, 1.7.2, 1.7.3, 1.7.4, 1.7.5, and 1.7.6.
The 1.7 and 1.7.0 directories are **not** the same. The 1.7 directory is built on each merged commit to the [`release/v1.7`](https://github.com/go-gitea/gitea/tree/release/v1.7) branch.
The 1.7.0 directory, however, is a build that was created when the [`v1.7.0`](https://github.com/go-gitea/gitea/releases/tag/v1.7.0) tag was created.
This means that 1.x downloads will change as commits are merged to their respective branch (think of it as a separate "main" branch for each release).
This means that 1.x downloads will change as commits are merged to their respective branch (think of it as a separate "main" branch for each release).
On the other hand, 1.x.x downloads should never change.
## How to migrate from Gogs/GitHub/etc. to Gitea
@ -41,11 +46,14 @@ To migrate from Gogs to Gitea:
- [Gogs version 0.9.146 or less]({{< relref "doc/upgrade/from-gogs.en-us.md" >}})
- [Gogs version 0.11.46.0418](https://github.com/go-gitea/gitea/issues/4286)
To migrate from GitHub to Gitea, you can use Gitea's built-in migration form.
In order to migrate items such as issues, pull requests, etc. you will need to input at least your username.
To migrate from GitHub to Gitea, you can use Gitea's built-in migration form.
In order to migrate items such as issues, pull requests, etc. you will need to input at least your username.
To migrate from GitLab to Gitea, you can use this non-affiliated tool:
To migrate from GitLab to Gitea, you can use this non-affiliated tool:
https://github.com/loganinak/MigrateGitlabToGogs
## Where does Gitea store what file
@ -83,9 +91,9 @@ There are a few places that could make this show incorrectly.
If certain clone options aren't showing up (HTTP/S or SSH), the following options can be checked in your `app.ini`
`DISABLE_HTTP_GIT`: if set to true, there will be no HTTP/HTTPS link
`DISABLE_SSH`: if set to true, there will be no SSH link
`SSH_EXPOSE_ANONYMOUS`: if set to false, SSH links will be hidden for anonymous users
- `DISABLE_HTTP_GIT`: if set to true, there will be no HTTP/HTTPS link
- `DISABLE_SSH`: if set to true, there will be no SSH link
- `SSH_EXPOSE_ANONYMOUS`: if set to false, SSH links will be hidden for anonymous users
## File upload fails with: 413 Request Entity Too Large
@ -95,19 +103,21 @@ See the [reverse proxy guide]({{< relref "doc/usage/reverse-proxies.en-us.md" >}
## Custom Templates not loading or working incorrectly
Gitea's custom templates must be added to the correct location or Gitea will not find and use them.
Gitea's custom templates must be added to the correct location or Gitea will not find and use them.
The correct path for the template(s) will be relative to the `CustomPath`
1. To find `CustomPath`, look for Custom File Root Path in Site Administration -> Configuration
- If that doesn't exist, you can try `echo $GITEA_CUSTOM`
If that doesn't exist, you can try `echo $GITEA_CUSTOM`
2. If you are still unable to find a path, the default can be [calculated above](#where-does-gitea-store-x-file)
2. If you are still unable to find a path, the default can be [calculated above](#where-does-gitea-store-what-file)
3. Once you have figured out the correct custom path, you can refer to the [customizing Gitea]({{< relref "doc/advanced/customizing-gitea.en-us.md" >}}) page to add your template to the correct location.
## Active user vs login prohibited user
In Gitea, an "active" user refers to a user that has activated their account via email.
In Gitea, an "active" user refers to a user that has activated their account via email.
A "login prohibited" user is a user that is not allowed to log in to Gitea anymore
## Setting up logging
@ -116,8 +126,10 @@ A "login prohibited" user is a user that is not allowed to log in to Gitea anymo
## What is Swagger?
[Swagger](https://swagger.io/) is what Gitea uses for its API.
All Gitea instances have the built-in API, though it can be disabled by setting `ENABLE_SWAGGER` to `false` in the `api` section of your `app.ini`
[Swagger](https://swagger.io/) is what Gitea uses for its API.
All Gitea instances have the built-in API, though it can be disabled by setting `ENABLE_SWAGGER` to `false` in the `api` section of your `app.ini`
For more information, refer to Gitea's [API docs]({{< relref "doc/developers/api-usage.en-us.md" >}})
@ -139,7 +151,8 @@ You can configure `EMAIL_DOMAIN_WHITELIST` or `EMAIL_DOMAIN_BLOCKLIST` in your a
### Only allow/block certain OpenID providers
You can configure `WHITELISTED_URIS` or `BLACKLISTED_URIS` under `[openid]` in your `app.ini`
You can configure `WHITELISTED_URIS` or `BLACKLISTED_URIS` under `[openid]` in your `app.ini`
**NOTE:** whitelisted takes precedence, so if it is non-blank then blacklisted is ignored
### Issue only users
@ -163,38 +176,48 @@ Use [Fail2Ban]({{< relref "doc/usage/fail2ban-setup.en-us.md" >}}) to monitor an
Gitea supports three official themes right now, `gitea` (light), `arc-green` (dark), and `auto` (automatically switches between the previous two depending on operating system settings).
To add your own theme, currently the only way is to provide a complete theme (not just color overrides)
As an example, let's say our theme is `arc-blue` (this is a real theme, and can be found [in this issue](https://github.com/go-gitea/gitea/issues/6011))
Name the `.css` file `theme-arc-blue.css` and add it to your custom folder in `custom/public/css`
As an example, let's say our theme is `arc-blue` (this is a real theme, and can be found [in this issue](https://github.com/go-gitea/gitea/issues/6011))
Name the `.css` file `theme-arc-blue.css` and add it to your custom folder in `custom/public/css`
Allow users to use it by adding `arc-blue` to the list of `THEMES` in your `app.ini`
## SSHD vs built-in SSH
SSHD is the built-in SSH server on most Unix systems.
SSHD is the built-in SSH server on most Unix systems.
Gitea also provides its own SSH server, for usage when SSHD is not available.
## Gitea is running slow
The most common culprit for this is loading federated avatars.
This can be turned off by setting `ENABLE_FEDERATED_AVATAR` to `false` in your `app.ini`
The most common culprit for this is loading federated avatars.
This can be turned off by setting `ENABLE_FEDERATED_AVATAR` to `false` in your `app.ini`
Another option that may need to be changed is setting `DISABLE_GRAVATAR` to `true` in your `app.ini`
## Can't create repositories/files
Make sure that Gitea has sufficient permissions to write to its home directory and data directory.
See [AppDataPath and RepoRootPath](#where-does-gitea-store-x-file)
Make sure that Gitea has sufficient permissions to write to its home directory and data directory.
See [AppDataPath and RepoRootPath](#where-does-gitea-store-what-file)
**Note for Arch users:** At the time of writing this, there is an issue with the Arch package's systemd file including this line:
`ReadWritePaths=/etc/gitea/app.ini`
`ReadWritePaths=/etc/gitea/app.ini`
Which makes all other paths non-writeable to Gitea.
## Translation is incorrect/how to add more translations
Our translations are currently crowd-sourced on our [Crowdin project](https://crowdin.com/project/gitea)
Our translations are currently crowd-sourced on our [Crowdin project](https://crowdin.com/project/gitea)
Whether you want to change a translation or add a new one, it will need to be there as all translations are overwritten in our CI via the Crowdin integration.
## Hooks aren't running
If Gitea is not running hooks, a common cause is incorrect setup of SSH keys.
If Gitea is not running hooks, a common cause is incorrect setup of SSH keys.
See [SSH Issues](#ssh-issues) for more information.
You can also try logging into the administration panel and running the `Resynchronize pre-receive, update and post-receive hooks of all repositories.` option.
@ -203,7 +226,8 @@ You can also try logging into the administration panel and running the `Resynchr
If you cannot reach repositories over `ssh`, but `https` works fine, consider looking into the following.
First, make sure you can access Gitea via SSH.
First, make sure you can access Gitea via SSH.
`ssh git@myremote.example`
If the connection is successful, you should receive an error message like the following:
@ -236,7 +260,8 @@ following things:
- On the server:
- Make sure the repository exists and is correctly named.
- Check the permissions of the `.ssh` directory in the system user's home directory.
- Verify that the correct public keys are added to `.ssh/authorized_keys`.
- Verify that the correct public keys are added to `.ssh/authorized_keys`.
Try to run `Rewrite '.ssh/authorized_keys' file (for Gitea SSH keys)` on the
Gitea admin panel.
- Read Gitea logs.
@ -289,7 +314,8 @@ Check that you have proper access to the repository
error: failed to push some refs to '<GIT_REPO_URL>'
```
Check the value of `LFS_HTTP_AUTH_EXPIRY` in your `app.ini` file.
Check the value of `LFS_HTTP_AUTH_EXPIRY` in your `app.ini` file.
By default, your LFS token will expire after 20 minutes. If you have a slow connection or a large file (or both), it may not finish uploading within the time limit.
You may want to set this value to `60m` or `120m`.
@ -306,17 +332,21 @@ There is no setting for password resets. It is enabled when a [mail service]({{<
- As an **admin**, you can change any user's password (and optionally force them to change it on next login)...
- By navigating to your `Site Administration -> User Accounts` page and editing a user.
- By using the [admin CLI commands]({{< relref "doc/usage/command-line.en-us.md#admin" >}}).
- By using the [admin CLI commands]({{< relref "doc/usage/command-line.en-us.md#admin" >}}).
Keep in mind most commands will also need a [global flag]({{< relref "doc/usage/command-line.en-us.md#global-options" >}}) to point the CLI at the correct configuration.
- As a **user** you can change it...
- In your account `Settings -> Account` page (this method **requires** you to know your current password).
- By using the `Forgot Password` link.
- By using the `Forgot Password` link.
If the `Forgot Password/Account Recovery` page is disabled, please contact your administrator to configure a [mail service]({{< relref "doc/usage/email-setup.en-us.md" >}}).
## Why is my markdown broken
In Gitea version `1.11` we moved to [goldmark](https://github.com/yuin/goldmark) for markdown rendering, which is [CommonMark](https://commonmark.org/) compliant.
If you have markdown that worked as you expected prior to version `1.11` and after upgrading it's not working anymore, please look through the CommonMark spec to see whether the problem is due to a bug or non-compliant syntax.
In Gitea version `1.11` we moved to [goldmark](https://github.com/yuin/goldmark) for markdown rendering, which is [CommonMark](https://commonmark.org/) compliant.
If you have markdown that worked as you expected prior to version `1.11` and after upgrading it's not working anymore, please look through the CommonMark spec to see whether the problem is due to a bug or non-compliant syntax.
If it is the latter, _usually_ there is a compliant alternative listed in the spec.
## Upgrade errors with MySQL
@ -332,8 +362,10 @@ is too small. Gitea requires that the `ROWFORMAT` for its tables is `DYNAMIC`.
If you are receiving an error line containing `Error 1071: Specified key was too long; max key length is 1000 bytes...`
then you are attempting to run Gitea on tables which use the ISAM engine. While this may have worked by chance in previous versions of Gitea, it has never been officially supported and
you must use InnoDB. You should run `ALTER TABLE table_name ENGINE=InnoDB;` for each table in the database.
you must use InnoDB. You should run `ALTER TABLE table_name ENGINE=InnoDB;` for each table in the database.
If you are using MySQL 5, another possible fix is
```mysql
SET GLOBAL innodb_file_format=Barracuda;
SET GLOBAL innodb_file_per_table=1;
@ -404,8 +436,8 @@ gitea doctor recreate-table
It is highly recommended to back-up your database before running these commands.
## Why are tabs/indents wrong when viewing files
If you are using Cloudflare, turn off the auto-minify option in the dashboard.
If you are using Cloudflare, turn off the auto-minify option in the dashboard.
`Speed` -> `Optimization` -> Uncheck `HTML` within the `Auto-Minify` settings.
1. Your `app.ini` (with any sensitive data scrubbed as necessary).
2. The Gitea logs, and any other appropriate log files for the situation.
* The logs are likely to be outputted to console. If you need to collect logs from files,
- The logs are likely to be outputted to console. If you need to collect logs from files,
you could copy the following config into your `app.ini` (remove all other `[log]` sections),
then you can find the `*.log` files in Gitea's log directory (default: `%(GITEA_WORK_DIR)/log`).
```ini
; To show all SQL logs, you can also set LOG_SQL=true in the [database] section
[log]
@ -38,17 +39,20 @@ menu:
FILE_NAME=router.log
[log.file.xorm]
FILE_NAME=xorm.log
```
```
3. Any error messages you are seeing.
4. When possible, try to replicate the issue on [try.gitea.io](https://try.gitea.io) and include steps so that others can reproduce the issue.
* This will greatly improve the chance that the root of the issue can be quickly discovered and resolved.
- This will greatly improve the chance that the root of the issue can be quickly discovered and resolved.
5. If you meet slow/hanging/deadlock problems, please report the stack trace when the problem occurs:
1. Enable pprof in `app.ini` and restart Gitea
```ini
[server]
ENABLE_PPROF = true
```
2. Trigger the bug, when Gitea gets stuck, use curl or browser to visit: `http://127.0.0.1:6060/debug/pprof/goroutine?debug=1` (IP must be `127.0.0.1` and port must be `6060`).
```ini
[server]
ENABLE_PPROF = true
```
2. Trigger the bug, when Gitea gets stuck, use curl or browser to visit: `http://127.0.0.1:6060/debug/pprof/goroutine?debug=1` (IP must be `127.0.0.1` and port must be `6060`).
3. If you are using Docker, please use `docker exec -it <container-name> curl "http://127.0.0.1:6060/debug/pprof/goroutine?debug=1"`.
4. Report the output (the stack trace doesn't contain sensitive data)
@ -27,13 +27,13 @@ Note: All steps below requires that the database engine of your choice is instal
## MySQL
1. For remote database setup, you will need to make MySQL listen to your IP address. Edit `bind-address` option on `/etc/mysql/my.cnf` on database instance to:
1. For remote database setup, you will need to make MySQL listen to your IP address. Edit `bind-address` option on `/etc/mysql/my.cnf` on database instance to:
```ini
bind-address = 203.0.113.3
```
2. On database instance, login to database console as root:
2. On database instance, login to database console as root:
```
mysql -u root -p
@ -41,7 +41,7 @@ Note: All steps below requires that the database engine of your choice is instal
Enter the password as prompted.
3. Create database user which will be used by Gitea, authenticated by password. This example uses `'gitea'` as password. Please use a secure password for your instance.
3. Create database user which will be used by Gitea, authenticated by password. This example uses `'gitea'` as password. Please use a secure password for your instance.
For local database:
@ -61,7 +61,7 @@ Note: All steps below requires that the database engine of your choice is instal
Replace username and password above as appropriate.
4. Create database with UTF-8 charset and collation. Make sure to use `utf8mb4` charset instead of `utf8` as the former supports all Unicode characters (including emojis) beyond _Basic Multilingual Plane_. Also, collation chosen depending on your expected content. When in doubt, use either `unicode_ci` or `general_ci`.
4. Create database with UTF-8 charset and collation. Make sure to use `utf8mb4` charset instead of `utf8` as the former supports all Unicode characters (including emojis) beyond _Basic Multilingual Plane_. Also, collation chosen depending on your expected content. When in doubt, use either `unicode_ci` or `general_ci`.
```sql
CREATE DATABASE giteadb CHARACTER SET 'utf8mb4' COLLATE 'utf8mb4_unicode_ci';
@ -69,7 +69,7 @@ Note: All steps below requires that the database engine of your choice is instal
Replace database name as appropriate.
5. Grant all privileges on the database to database user created above.
5. Grant all privileges on the database to database user created above.
For local database:
@ -85,9 +85,9 @@ Note: All steps below requires that the database engine of your choice is instal
FLUSH PRIVILEGES;
```
6. Quit from database console by `exit`.
6. Quit from database console by `exit`.
7. On your Gitea server, test connection to the database:
7. On your Gitea server, test connection to the database:
```
mysql -u gitea -h 203.0.113.3 -p giteadb
@ -99,13 +99,13 @@ Note: All steps below requires that the database engine of your choice is instal
## PostgreSQL
1. For remote database setup, configure PostgreSQL on database instance to listen to your IP address by editing `listen_addresses` on `postgresql.conf` to:
1. For remote database setup, configure PostgreSQL on database instance to listen to your IP address by editing `listen_addresses` on `postgresql.conf` to:
```ini
listen_addresses = 'localhost, 203.0.113.3'
```
2. PostgreSQL uses `md5` challenge-response encryption scheme for password authentication by default. Nowadays this scheme is not considered secure anymore. Use SCRAM-SHA-256 scheme instead by editing the `postgresql.conf` configuration file on the database server to:
2. PostgreSQL uses `md5` challenge-response encryption scheme for password authentication by default. Nowadays this scheme is not considered secure anymore. Use SCRAM-SHA-256 scheme instead by editing the `postgresql.conf` configuration file on the database server to:
```ini
password_encryption = scram-sha-256
@ -113,13 +113,13 @@ Note: All steps below requires that the database engine of your choice is instal
Restart PostgreSQL to apply the setting.
3. On the database server, login to the database console as superuser:
3. On the database server, login to the database console as superuser:
```
su -c "psql" - postgres
```
4. Create database user (role in PostgreSQL terms) with login privilege and password. Please use a secure, strong password instead of `'gitea'` below:
4. Create database user (role in PostgreSQL terms) with login privilege and password. Please use a secure, strong password instead of `'gitea'` below:
```sql
CREATE ROLE gitea WITH LOGIN PASSWORD 'gitea';
@ -127,7 +127,7 @@ Note: All steps below requires that the database engine of your choice is instal
Replace username and password as appropriate.
5. Create database with UTF-8 charset and owned by the database user created earlier. Any `libc` collations can be specified with `LC_COLLATE` and `LC_CTYPE` parameter, depending on expected content:
5. Create database with UTF-8 charset and owned by the database user created earlier. Any `libc` collations can be specified with `LC_COLLATE` and `LC_CTYPE` parameter, depending on expected content:
@ -135,7 +135,7 @@ Note: All steps below requires that the database engine of your choice is instal
Replace database name as appropriate.
6. Allow the database user to access the database created above by adding the following authentication rule to `pg_hba.conf`.
6. Allow the database user to access the database created above by adding the following authentication rule to `pg_hba.conf`.
For local database:
@ -155,7 +155,7 @@ Note: All steps below requires that the database engine of your choice is instal
Restart PostgreSQL to apply new authentication rules.
7. On your Gitea server, test connection to the database.
7. On your Gitea server, test connection to the database.
For local database:
@ -188,13 +188,13 @@ If the communication between Gitea and your database instance is performed throu
The PostgreSQL driver used by Gitea supports two-way TLS. In two-way TLS, both database client and server authenticate each other by sending their respective certificates to their respective opposite for validation. In other words, the server verifies client certificate, and the client verifies server certificate.
1. On the server with the database instance, place the following credentials:
1. On the server with the database instance, place the following credentials:
@ -258,13 +258,13 @@ While the MySQL driver used by Gitea also supports two-way TLS, Gitea currently
In one-way TLS, the database client verifies the certificate sent from server during the connection handshake, and the server assumes that the connected client is legitimate, since client certificate verification doesn't take place.
1. On the database instance, place the following credentials:
1. On the database instance, place the following credentials:
5. The database user for Gitea may have been created earlier, but it would authenticate only against the IP addresses of the server running Gitea. To authenticate against its domain name, recreate the user, and this time also set it to require TLS for connecting to the database:
5. The database user for Gitea may have been created earlier, but it would authenticate only against the IP addresses of the server running Gitea. To authenticate against its domain name, recreate the user, and this time also set it to require TLS for connecting to the database:
```sql
DROP USER 'gitea'@'192.0.2.10';
@ -294,9 +294,9 @@ In one-way TLS, the database client verifies the certificate sent from server du
Replace database user name, password, and Gitea instance domain as appropriate.
6. Make sure that the CA certificate chain required to validate the database server certificate is on the system certificate store of both the database and Gitea servers. Consult your system documentation for instructions on adding a CA certificate to the certificate store.
6. Make sure that the CA certificate chain required to validate the database server certificate is on the system certificate store of both the database and Gitea servers. Consult your system documentation for instructions on adding a CA certificate to the certificate store.
7. On the server running Gitea, test connection to the database:
7. On the server running Gitea, test connection to the database:
Gitea signs all binaries with a [GPG key](https://keys.openpgp.org/search?q=teabot%40gitea.io) to prevent against unwanted modification of binaries.
To validate the binary, download the signature file which ends in `.asc` for the binary you downloaded and use the GPG command line tool.
@ -89,11 +90,11 @@ chmod 640 /etc/gitea/app.ini
If you don't want the web installer to be able to write to the config file, it is possible to make the config file read-only for the Gitea user (owner/group `root:git`, mode `0640`) however you will need to edit your config file manually to:
* Set `INSTALL_LOCK= true`,
* Ensure all database configuration details are set correctly
* Ensure that the `SECRET_KEY` and `INTERNAL_TOKEN` values are set. (You may want to use the `gitea generate secret` to generate these secret keys.)
* Ensure that any other secret keys you need are set.
* Set `INSTALL_LOCK= true`,
* Ensure all database configuration details are set correctly
* Ensure that the `SECRET_KEY` and `INTERNAL_TOKEN` values are set. (You may want to use the `gitea generate secret` to generate these secret keys.)
* Ensure that any other secret keys you need are set.
See the [command line documentation]({{< relref "doc/usage/command-line.en-us.md" >}}) for information on using `gitea generate secret`.
OpenSUSE build service provides packages for [openSUSE and SLE](https://software.opensuse.org/download/package?package=gitea&project=devel%3Atools%3Ascm)
OpenSUSE build service provides packages for [openSUSE and SLE](https://software.opensuse.org/download/package?package=gitea&project=devel%3Atools%3Ascm)
in the Development Software Configuration Management Repository
@ -30,7 +30,6 @@ cd $GOPATH/src/code.gitea.io/gitea
Maintenant, il est temps de décider quelle version de Gitea vous souhaitez compiler et installer. Actuellement, ils existent plusieurs options possibles. Si vous voulez compiler notre branche `master`, vous pouvez directement passer à la [section compilation](#compilation), cette branche représente la dernière version en cours de développement et n'a pas vocation à être utiliser en production.
Si vous souhaitez compiler la dernière version stable, utilisez les étiquettes ou les différentes branches disponibles. Vous pouvez voir les branches disponibles et comment utiliser cette branche avec ces commandes:
@ -255,7 +255,7 @@ favorite browser to finalize the installation. Visit http://server-ip:3000 and f
installation wizard. If the database was started with the `docker-compose` setup as
documented above, please note that `db` must be used as the database hostname.
## Configure the user inside Gitea using environment variables
## Configure the user inside Gitea using environment variables
- `USER`: **git**: The username of the user that runs Gitea within the container.
- `USER_UID`: **1000**: The UID (Unix user ID) of the user that runs Gitea within the container. Match this to the UID of the owner of the `/data` volume if using host volumes (this is not necessary with named volumes).
@ -394,9 +394,9 @@ In this option, the idea is that the host simply uses the `authorized_keys` that
Here is a detailed explanation what is happening when a SSH request is made:
1. The client adds their SSH public key to Gitea using the webpage.
2. Gitea in the container will add an entry for this key to the `.ssh/authorized_keys` file of its running user, `git`.
2. Gitea in the container will add an entry for this key to the `.ssh/authorized_keys` file of its running user, `git`.
- However, because `/home/git/.ssh/` on the host is mounted as `/data/git/.ssh` this means that the key has been added to the host `git` user's `authorized_keys` file too.
3. This entry has the public key, but also has a `command=` option.
3. This entry has the public key, but also has a `command=` option.
- This command matches the location of the Gitea binary on the container, but also the location of the shim on the host.
4. The client then makes an SSH request to the host SSH server using the `git` user, e.g. `git clone git@domain:user/repo.git`.
5. The client will attempt to authenticate with the server, passing one or more public keys in turn to the host.
@ -441,7 +441,7 @@ we create a new shell for the git user. As an administrative user on the host ru
Here is a detailed explanation what is happening when a SSH request is made:
1. The client adds their SSH public key to Gitea using the webpage.
2. Gitea in the container will add an entry for this key to the `.ssh/authorized_keys` file of its running user, `git`.
2. Gitea in the container will add an entry for this key to the `.ssh/authorized_keys` file of its running user, `git`.
- However, because `/home/git/.ssh/` on the host is mounted as `/data/git/.ssh` this means that the key has been added to the host `git` user's `authorized_keys` file too.
3. This entry has the public key, but also has a `command=` option.
- This command matches the location of the Gitea binary on the container.
Here is a detailed explanation what is happening when a SSH request is made:
1. The client adds their SSH public key to Gitea using the webpage.
2. Gitea in the container will add an entry for this key to the `.ssh/authorized_keys` file of its running user, `git`.
2. Gitea in the container will add an entry for this key to the `.ssh/authorized_keys` file of its running user, `git`.
- However, because `/home/git/.ssh/` on the host is mounted as `/data/git/.ssh` this means that the key has been added to the host `git` user's `authorized_keys` file too.
3. This entry has the public key, but also has a `command=` option.
- This command matches the location of the Gitea binary on the container.
@ -531,7 +531,7 @@ In this option, the idea is that the host SSH uses an `AuthorizedKeysCommand` in
Now all attempts to login as the `git` user on the host will be forwarded to the docker - including the `SSH_ORIGINAL_COMMAND`. We now need to set-up SSH authentication on the host.
We will do this by leveraging the [SSH AuthorizedKeysCommand](https://docs.gitea.io/en-us/command-line/#keys) to match the keys against those accepted by Gitea.
We will do this by leveraging the [SSH AuthorizedKeysCommand](https://docs.gitea.io/en-us/command-line/#keys) to match the keys against those accepted by Gitea.
Add the following block to `/etc/ssh/sshd_config`, on the host:
To update Gitea, download a newer version, stop the old one, perform a backup, and run the new one.
Every time a Gitea instance starts up, it checks whether a database migration should be run.
Every time a Gitea instance starts up, it checks whether a database migration should be run.
If a database migration is required, Gitea will take some time to complete the upgrade and then serve.
## Backup for downgrade
Gitea keeps compatibility for patch versions whose first two fields are the same (`a.b.x` -> `a.b.y`),
these patch versions can be upgraded and downgraded with the same database structure.
Otherwise (`a.b.?` -> `a.c.?`), a newer Gitea version will upgrade the old database
Gitea keeps compatibility for patch versions whose first two fields are the same (`a.b.x` -> `a.b.y`),
these patch versions can be upgraded and downgraded with the same database structure.
Otherwise (`a.b.?` -> `a.c.?`), a newer Gitea version will upgrade the old database
to a new structure that may differ from the old version.
For example:
@ -39,8 +39,8 @@ For example:
| 1.4.x | 1.5.y | ✅ Database gets upgraded. You can upgrade from 1.4.x to the latest 1.5.y directly. |
| 1.5.y | 1.4.x | ❌ Database already got upgraded and can not be used for an old Gitea, use a backup to downgrade. |
**Since you can not run an old Gitea with an upgraded database,
a backup should always be made before a database upgrade.**
**Since you can not run an old Gitea with an upgraded database,
a backup should always be made before a database upgrade.**
If you use Gitea in production, it's always highly recommended to make a backup before upgrade,
even if the upgrade is between patch versions.
@ -56,7 +56,6 @@ Backup steps:
If you are using cloud services or filesystems with snapshot feature,
a snapshot for the Gitea data volume and related object storage is more convenient.
## Upgrade with Docker
* `docker pull` the latest Gitea release.
@ -73,16 +72,16 @@ a snapshot for the Gitea data volume and related object storage is more convenie
* Download the latest Gitea binary to a temporary directory.
* Stop the running instance, backup data.
* Replace the installed Gitea binary with the downloaded one.
* Replace the installed Gitea binary with the downloaded one.
* Start the Gitea instance.
A script automating these steps for a deployment on Linux can be found at [`contrib/upgrade.sh` in Gitea's source tree](https://github.com/go-gitea/gitea/blob/main/contrib/upgrade.sh).
## Take care about customized templates
Gitea's template structure and variables may change between releases, if you are using customized templates,
do pay attention if your templates are compatible with the Gitea you are using.
Gitea's template structure and variables may change between releases, if you are using customized templates,
do pay attention if your templates are compatible with the Gitea you are using.
If the customized templates don't match Gitea version, you may experience:
`50x` server error, page components missing or malfunctioning, strange page layout, ...
If the customized templates don't match Gitea version, you may experience:
`50x` server error, page components missing or malfunctioning, strange page layout, ...
Remove or update the incompatible templates and Gitea web will work again.
@ -60,9 +60,10 @@ To send a test email to validate the settings, go to Gitea > Site Administration
For the full list of options check the [Config Cheat Sheet]({{< relref "doc/advanced/config-cheat-sheet.en-us.md" >}})
Please note: authentication is only supported when the SMTP server communication is encrypted with TLS or `HOST=localhost`. TLS encryption can be through:
- STARTTLS (also known as Opportunistic TLS) via port 587. Initial connection is done over cleartext, but then be upgraded over TLS if the server supports it.
- SMTPS connection (SMTP over TLS) via the default port 465. Connection to the server use TLS from the beginning.
- Forced SMTPS connection with `IS_TLS_ENABLED=true`. (These are both known as Implicit TLS.)
- STARTTLS (also known as Opportunistic TLS) via port 587. Initial connection is done over cleartext, but then be upgraded over TLS if the server supports it.
- SMTPS connection (SMTP over TLS) via the default port 465. Connection to the server use TLS from the beginning.
- Forced SMTPS connection with `IS_TLS_ENABLED=true`. (These are both known as Implicit TLS.)
This is due to protections imposed by the Go internal libraries against STRIPTLS attacks.
Note that Implicit TLS is recommended by [RFC8314](https://tools.ietf.org/html/rfc8314#section-3) since 2018.
@ -29,31 +29,37 @@ on a bad authentication from the web or CLI using SSH or HTTP respectively:
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:143:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:155:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:198:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:213:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:227:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:249:sshConnectionFailed() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(From 1.15 this new message will available and doesn't have any of the false positive results that above messages from publicKeyHandler do. This will only be logged if the user has completely failed authentication.)
@ -60,6 +60,7 @@ If you are using Docker, make sure that this port is configured in your `docker-
[ACME](https://tools.ietf.org/html/rfc8555) is a Certificate Authority standard protocol that allows you to automatically request and renew SSL/TLS certificates. [Let's Encrypt](https://letsencrypt.org/) is a free publicly trusted Certificate Authority server using this standard. Only `HTTP-01` and `TLS-ALPN-01` challenges are implemented. In order for ACME challenges to pass and verify your domain ownership, external traffic to the gitea domain on port `80` (`HTTP-01`) or port `443` (`TLS-ALPN-01`) has to be served by the gitea instance. Setting up [HTTP redirection](#setting-up-http-redirection) and port-forwards might be needed for external traffic to route correctly. Normal traffic to port `80` will otherwise be automatically redirected to HTTPS. **You must consent** to the ACME provider's terms of service (default Let's Encrypt's [terms of service](https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf)).
Minimum setup using the default Let's Encrypt:
```ini
[server]
PROTOCOL=https
@ -72,6 +73,7 @@ ACME_EMAIL=email@example.com
```
Minimumg setup using a [smallstep CA](https://github.com/smallstep/certificates), refer to [their tutorial](https://smallstep.com/docs/tutorials/acme-challenge) for more information.
@ -55,7 +55,7 @@ And there are some differences for permissions between individual repositories a
## Individual Repository
For individual repositories, the creators are the only owners of repositories and have no limit to change anything of this
For individual repositories, the creators are the only owners of repositories and have no limit to change anything of this
repository or delete it. Repositories owners could add collaborators to help maintain the repositories. Collaborators could have `Read`, `Write` and `Admin` permissions.
@ -138,7 +138,6 @@ In your nginx config file containing your Gitea proxy directive, find the `locat
`client_max_body_size 16M;` to set this limit to 16 megabytes or any other number of choice.
If you use Git LFS, this will also limit the size of the largest file you will be able to push.
## Apache HTTPD
If you want Apache HTTPD to serve your Gitea instance, you can add the following to your Apache HTTPD configuration (usually located at `/etc/apache2/httpd.conf` in Ubuntu):
@ -307,6 +306,7 @@ If you wish to run Gitea with IIS. You will need to setup IIS with URL Rewrite a
If you want HAProxy to serve your Gitea instance, you can add the following to your HAProxy configuration
add an acl in the frontend section to redirect calls to gitea.example.com to the correct backend
```
frontend http-in
...
@ -316,6 +316,7 @@ frontend http-in
```
add the previously defined backend section
```
backend gitea
server localhost:3000 check
@ -338,6 +339,7 @@ frontend http-in
With that configuration http://example.com/gitea/ will redirect to your Gitea instance.
Gitea `1.11.0` and above includes template repositories, and one feature implemented with them is auto-expansion of specific variables within your template files.
To tell Gitea which files to expand, you must include a `template` file inside the `.gitea` directory of the template repository.
Gitea `1.11.0` and above includes template repositories, and one feature implemented with them is auto-expansion of specific variables within your template files.
To tell Gitea which files to expand, you must include a `template` file inside the `.gitea` directory of the template repository.
Gitea uses [gobwas/glob](https://github.com/gobwas/glob) for its glob syntax. It closely resembles a traditional `.gitignore`, however there may be slight differences.
## Example `.gitea/template` file
@ -45,7 +47,8 @@ a/b/c/d.json
## Variable Expansion
In any file matched by the above globs, certain variables will be expanded.
In any file matched by the above globs, certain variables will be expanded.
All variables must be of the form `$VAR` or `${VAR}`. To escape an expansion, use a double `$$`, such as `$$VAR` or `$${VAR}`
| Variable | Expands To | Transformable |
@ -65,7 +68,8 @@ All variables must be of the form `$VAR` or `${VAR}`. To escape an expansion, us
## Transformers :robot:
Gitea `1.12.0` adds a few transformers to some of the applicable variables above.
Gitea `1.12.0` adds a few transformers to some of the applicable variables above.
For example, to get `REPO_NAME` in `PASCAL`-case, your template would use `${REPO_NAME_PASCAL}`
Feeding `go-sdk` to the available transformers yields...
Gitea ist ein einfacher, selbst gehosteter Git-Service. Änlich wie GitHub, Bitbucket oder GitLab.
Gitea ist ein einfacher, selbst gehosteter Git-Service. Änlich wie GitHub, Bitbucket oder GitLab.
Gitea ist ein [Gogs](http://gogs.io)-Fork.
## Ziele
* Einfach zu installieren
* Plattformübergreifend
* Leichtgewichtig
* Quelloffen
* Einfach zu installieren
* Plattformübergreifend
* Leichtgewichtig
* Quelloffen
## System Voraussetzungen
- Ein Raspberry Pi 3 ist leistungsstark genug, um Gitea für kleine Belastungen laufen zu lassen.
- 2 CPU Kerne und 1GB RAM sind für kleine Teams/Projekte ausreichend.
- Gitea sollte unter einem seperaten nicht-root Account auf UNIX-Systemen ausgeführt werden.
- Achtung: Gitea verwaltet die `~/.ssh/authorized_keys` Datei. Gitea unter einem normalen Benutzer auszuführen könnte dazu führen, dass dieser sich nicht mehr anmelden kann.
- [Git](https://git-scm.com/) Version 2.0 oder später wird benötigt.
- Wenn git >= 2.1.2. und [Git large file storage](https://git-lfs.github.com/) aktiviert ist, dann wird es auch in Gitea verwendbar sein.
- Wenn git >= 2.18, dann wird das Rendern von Commit-Graphen automatisch aktiviert.
* Ein Raspberry Pi 3 ist leistungsstark genug, um Gitea für kleine Belastungen laufen zu lassen.
* 2 CPU Kerne und 1GB RAM sind für kleine Teams/Projekte ausreichend.
* Gitea sollte unter einem seperaten nicht-root Account auf UNIX-Systemen ausgeführt werden.
* Achtung: Gitea verwaltet die `~/.ssh/authorized_keys` Datei. Gitea unter einem normalen Benutzer auszuführen könnte dazu führen, dass dieser sich nicht mehr anmelden kann.
* [Git](https://git-scm.com/) Version 2.0 oder später wird benötigt.
* Wenn git >= 2.1.2. und [Git large file storage](https://git-lfs.github.com/) aktiviert ist, dann wird es auch in Gitea verwendbar sein.
* Wenn git >= 2.18, dann wird das Rendern von Commit-Graphen automatisch aktiviert.
## Browser Unterstützung
- Letzten 2 Versions von Chrome, Firefox, Safari und Edge
- Firefox ESR
* Letzten 2 Versions von Chrome, Firefox, Safari und Edge