19 Commits (release/v1.22-legacy)

Author	SHA1	Message	Date
Lunny Xiao	6e87a44034	Allow get release download files and lfs files with oauth2 token format (#26430) ... Fix #26165 Fix #25257	1 year ago
wxiaoguang	c28e29fd94	Refactor tests (#26464) ... 1. Give the global variable clear names 2. Use generic parameter for `onGiteaRun`	1 year ago
wxiaoguang	a85a862804	Fix admin queue page title (#26409) ... Fix #26408 ``` # locale_en-US.ini [admin] monitor.queues = Queues ``` --------- Co-authored-by: silverwind <me@silverwind.io>	1 year ago
Earl Warren	b1089bdafe	speed up TestEventSourceManagerRun (#26262) ... - `setting.UI.Notification.EventSourceUpdateTime` is by default 10 seconds, which adds an 10 second delay before the test succeeds. - Lower the interval to reduce it to at most 3 second delay (the code only send events when they are at least 2 seconds old). (cherry picked from commit 3adb9ae6009ff3ddebaed4875e086343f668ef7b) Refs: https://codeberg.org/forgejo/forgejo/pulls/1166 Co-authored-by: Gusted <postmaster@gusted.xyz> Co-authored-by: Giteabot <teabot@gitea.io>	1 year ago
silverwind	88f835192d	Replace `interface{}` with `any` (#25686) ... Result of running `perl -p -i -e 's#interface\{\}#any#g' **/*` and `make fmt`. Basically the same [as golang did](2580d0e08d).	1 year ago
wxiaoguang	2cdf260f42	Refactor path & config system (#25330) ... # The problem There were many "path tricks": * By default, Gitea uses its program directory as its work path * Gitea tries to use the "work path" to guess its "custom path" and "custom conf (app.ini)" * Users might want to use other directories as work path * The non-default work path should be passed to Gitea by GITEA_WORK_DIR or "--work-path" * But some Gitea processes are started without these values * The "serv" process started by OpenSSH server * The CLI sub-commands started by site admin * The paths are guessed by SetCustomPathAndConf again and again * The default values of "work path / custom path / custom conf" can be changed when compiling # The solution * Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use test code to cover its behaviors. * When Gitea's web server runs, write the WORK_PATH to "app.ini", this value must be the most correct one, because if this value is not right, users would find that the web UI doesn't work and then they should be able to fix it. * Then all other sub-commands can use the WORK_PATH in app.ini to initialize their paths. * By the way, when Gitea starts for git protocol, it shouldn't output any log, otherwise the git protocol gets broken and client blocks forever. The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path > env var GITEA_WORK_DIR > builtin default The "app.ini" searching order is: cmd arg --config > cmd arg "work path / custom path" > env var "work path / custom path" > builtin default ## ⚠️ BREAKING If your instance's "work path / custom path / custom conf" doesn't meet the requirements (eg: work path must be absolute), Gitea will report a fatal error and exit. You need to set these values according to the error log. ---- Close #24818 Close #24222 Close #21606 Close #21498 Close #25107 Close #24981 Maybe close #24503 Replace #23301 Replace #22754 And maybe more	1 year ago
Lunny Xiao	d6dd6d641b	Fix all possible setting error related storages and added some tests (#23911) ... Follow up #22405 Fix #20703 This PR rewrites storage configuration read sequences with some breaks and tests. It becomes more strict than before and also fixed some inherit problems. - Move storage's MinioConfig struct into setting, so after the configuration loading, the values will be stored into the struct but not still on some section. - All storages configurations should be stored on one section, configuration items cannot be overrided by multiple sections. The prioioty of configuration is `[attachment]` > `[storage.attachments]` | `[storage.customized]` > `[storage]` > `default` - For extra override configuration items, currently are `SERVE_DIRECT`, `MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another section. The prioioty of the override configuration is `[attachment]` > `[storage.attachments]` > `default`. - Add more tests for storages configurations. - Update the storage documentations. --------- Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>	1 year ago
wxiaoguang	4647660776	Rewrite logger system (#24726) ... ## ⚠️ Breaking The `log.<mode>.<logger>` style config has been dropped. If you used it, please check the new config manual & app.example.ini to make your instance output logs as expected. Although many legacy options still work, it's encouraged to upgrade to the new options. The SMTP logger is deleted because SMTP is not suitable to collect logs. If you have manually configured Gitea log options, please confirm the logger system works as expected after upgrading. ## Description Close #12082 and maybe more log-related issues, resolve some related FIXMEs in old code (which seems unfixable before) Just like rewriting queue #24505 : make code maintainable, clear legacy bugs, and add the ability to support more writers (eg: JSON, structured log) There is a new document (with examples): `logging-config.en-us.md` This PR is safer than the queue rewriting, because it's just for logging, it won't break other logic. ## The old problems The logging system is quite old and difficult to maintain: * Unclear concepts: Logger, NamedLogger, MultiChannelledLogger, SubLogger, EventLogger, WriterLogger etc * Some code is diffuclt to konw whether it is right: `log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs `log.DelLogger("console")` * The old system heavily depends on ini config system, it's difficult to create new logger for different purpose, and it's very fragile. * The "color" trick is difficult to use and read, many colors are unnecessary, and in the future structured log could help * It's difficult to add other log formats, eg: JSON format * The log outputer doesn't have full control of its goroutine, it's difficult to make outputer have advanced behaviors * The logs could be lost in some cases: eg: no Fatal error when using CLI. * Config options are passed by JSON, which is quite fragile. * INI package makes the KEY in `[log]` section visible in `[log.sub1]` and `[log.sub1.subA]`, this behavior is quite fragile and would cause more unclear problems, and there is no strong requirement to support `log.<mode>.<logger>` syntax. ## The new design See `logger.go` for documents. ## Screenshot <details>    </details> ## TODO * [x] add some new tests * [x] fix some tests * [x] test some sub-commands (manually ....) --------- Co-authored-by: Jason Song <i@wolfogre.com> Co-authored-by: delvh <dev.lh@web.de> Co-authored-by: Giteabot <teabot@gitea.io>	2 years ago
wxiaoguang	6f9c278559	Rewrite queue (#24505) ... # ⚠️ Breaking Many deprecated queue config options are removed (actually, they should have been removed in 1.18/1.19). If you see the fatal message when starting Gitea: "Please update your app.ini to remove deprecated config options", please follow the error messages to remove these options from your app.ini. Example: ``` 2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]` 2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]` 2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options ``` Many options in `[queue]` are are dropped, including: `WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`, `BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed from app.ini. # The problem The old queue package has some legacy problems: * complexity: I doubt few people could tell how it works. * maintainability: Too many channels and mutex/cond are mixed together, too many different structs/interfaces depends each other. * stability: due to the complexity & maintainability, sometimes there are strange bugs and difficult to debug, and some code doesn't have test (indeed some code is difficult to test because a lot of things are mixed together). * general applicability: although it is called "queue", its behavior is not a well-known queue. * scalability: it doesn't seem easy to make it work with a cluster without breaking its behaviors. It came from some very old code to "avoid breaking", however, its technical debt is too heavy now. It's a good time to introduce a better "queue" package. # The new queue package It keeps using old config and concept as much as possible. * It only contains two major kinds of concepts: * The "base queue": channel, levelqueue, redis * They have the same abstraction, the same interface, and they are tested by the same testing code. * The "WokerPoolQueue", it uses the "base queue" to provide "worker pool" function, calls the "handler" to process the data in the base queue. * The new code doesn't do "PushBack" * Think about a queue with many workers, the "PushBack" can't guarantee the order for re-queued unhandled items, so in new code it just does "normal push" * The new code doesn't do "pause/resume" * The "pause/resume" was designed to handle some handler's failure: eg: document indexer (elasticsearch) is down * If a queue is paused for long time, either the producers blocks or the new items are dropped. * The new code doesn't do such "pause/resume" trick, it's not a common queue's behavior and it doesn't help much. * If there are unhandled items, the "push" function just blocks for a few seconds and then re-queue them and retry. * The new code doesn't do "worker booster" * Gitea's queue's handlers are light functions, the cost is only the go-routine, so it doesn't make sense to "boost" them. * The new code only use "max worker number" to limit the concurrent workers. * The new "Push" never blocks forever * Instead of creating more and more blocking goroutines, return an error is more friendly to the server and to the end user. There are more details in code comments: eg: the "Flush" problem, the strange "code.index" hanging problem, the "immediate" queue problem. Almost ready for review. TODO: * [x] add some necessary comments during review * [x] add some more tests if necessary * [x] update documents and config options * [x] test max worker / active worker * [x] re-run the CI tasks to see whether any test is flaky * [x] improve the `handleOldLengthConfiguration` to provide more friendly messages * [x] fine tune default config values (eg: length?) ## Code coverage: 	2 years ago
Lunny Xiao	377a0a20f0	Merge setting.InitXXX into one function with options (#24389) ... This PR will merge 3 Init functions on setting packages as 1 and introduce an options struct.	2 years ago
silverwind	47748df9b3	Enable forbidigo linter (#24278) ... Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which forbids print statements. Will check how to integrate this with the smallest impact possible, so a few `nolint` comments will likely be required. Plan is to just go through the issues and either: - Remove the print if it is nonsensical - Add a `//nolint` directive if it makes sense I don't plan on investigating the individual issues any further. <details> <summary>Initial Lint Results</summary> ``` modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(err) ^ modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(err) ^ modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("TempDir %s\n", tmpDir) ^ contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch) ^ contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* Navigate to %s to open PR\n", url) ^ contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* `xdg-open %s`\n", url) ^ contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch) ^ contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr) ^ contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("* Attempting git cherry-pick --continue") ^ contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* Attempting git cherry-pick %s\n", sha) ^ contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* Current branch is %s\n", currentBranch) ^ contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* Current branch is %s - not checking out\n", currentBranch) ^ contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch) ^ contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch) ^ contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* `git fetch %s main`\n", remote) ^ contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(string(out)) ^ contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(string(out)) ^ contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch) ^ contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(string(out)) ^ contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(string(out)) ^ models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("Unsupported RDBMS for integration tests") ^ models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("LoadFixtures failed after retries: %v\n", err) ^ models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Failed to generate sequence update: %v\n", err) ^ models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err) ^ models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("Environment variable $GITEA_ROOT not set") ^ models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath) ^ models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf) ^ models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Unable to create temporary data path %v\n", err) ^ models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Unable to InitFull: %v\n", err) ^ models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Error: %v", err) ^ contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("CreateTestEngine: %+v", err) ^ contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("PrepareTestDatabase: %+v\n", err) ^ contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("generate '%s': %+v\n", r, err) ^ contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("generate '%s': %+v\n", g.name, err) ^ contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s created.\n", path) ^ services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println(result) ^ services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println(result) ^ services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println(result) ^ modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) print Printer ^ modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name()) ^ tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf(format+"\n", args...) ^ tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf) ^ cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) _, _ = fmt.Printf("%s\n", respText) ^ cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s's password has been successfully updated!\n", user.Name) ^ cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("generated random password is '%s'\n", password) ^ cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Access token was successfully created... %s\n", t.Token) ^ cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("New user '%s' has been successfully created!\n", username) ^ cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s\n", t.Token) ^ cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Access token was successfully created: %s\n", t.Token) ^ cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword) ^ cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4") ^ cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now") ^ cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("This command can only be used with a MySQL or MSSQL database") ^ cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(err) ^ cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.") ^ cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(err) ^ cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(a.path) ^ cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("Using app.ini at", setting.CustomConf) ^ cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Extracting to %s:\n", destdir) ^ cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s already exists; skipped.\n", dest) ^ cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(dest) ^ cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s", internalToken) ^ cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("\n") ^ cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s", JWTSecretBase64) ^ cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("\n") ^ cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s", secretKey) ^ cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("\n") ^ cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println(strings.TrimSpace(authorizedString)) ^ cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Print("warning: Content is empty") ^ cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Print("Proceed with sending email? [Y/n] ") ^ cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Println("The mail was not sent") ^ cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) _, _ = fmt.Printf("Sent %s email(s) to all users\n", respText) ^ cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println("Gitea: SSH has been disabled") ^ cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("error showing subcommand help: %v\n", err) ^ cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.") ^ cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.") ^ cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.") ^ cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) println("If this is unexpected, please log in with password and setup Gitea under another user.") ^ cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Print(`{"type":"gitea","version":1}`) ^ tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Error initializing test database: %v\n", err) ^ tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("util.RemoveAll: %v\n", err) ^ tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Unable to remove repo indexer: %v\n", err) ^ tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%v", stdout.String()) ^ tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%v", stderr.String()) ^ tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%v", stdout.String()) ^ tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Error initializing test database: %v\n", err) ^ tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("util.RemoveAll: %v\n", err) ^ tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("Unable to remove repo indexer: %v\n", err) ^ tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo) fmt.Printf("%s", resp.Body) ^ ``` </details> --------- Co-authored-by: Giteabot <teabot@gitea.io>	2 years ago
wxiaoguang	e422342eeb	Allow adding new files to an empty repo (#24164) ... 	2 years ago
FuXiaoHei	cdc9e91750	add path prefix to ObjectStorage.Iterator (#23332) ... Support to iterator subdirectory in ObjectStorage for ObjectStorage.Iterator method. It's required for https://github.com/go-gitea/gitea/pull/22738 to make artifact files cleanable. --------- Co-authored-by: Jason Song <i@wolfogre.com> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>	2 years ago
Jason Song	c84238800b	Refactor `setting.Database.UseXXX` to methods (#23354) ... Replace #23350. Refactor `setting.Database.UseMySQL` to `setting.Database.Type.IsMySQL()`. To avoid mismatching between `Type` and `UseXXX`. This refactor can fix the bug mentioned in #23350, so it should be backported.	2 years ago
KN4CK3R	0ae1ed749d	Remove all package data after tests (#22984) ... Fixes #21020 --------- Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com> Co-authored-by: zeripath <art27@cantab.net>	2 years ago
Lunny Xiao	c53ad052d8	Refactor the setting to make unit test easier (#22405) ... Some bugs caused by less unit tests in fundamental packages. This PR refactor `setting` package so that create a unit test will be easier than before. - All `LoadFromXXX` files has been splited as two functions, one is `InitProviderFromXXX` and `LoadCommonSettings`. The first functions will only include the code to create or new a ini file. The second function will load common settings. - It also renames all functions in setting from `newXXXService` to `loadXXXSetting` or `loadXXXFrom` to make the function name less confusing. - Move `XORMLog` to `SQLLog` because it's a better name for that. Maybe we should finally move these `loadXXXSetting` into the `XXXInit` function? Any idea? --------- Co-authored-by: 6543 <6543@obermui.de> Co-authored-by: delvh <dev.lh@web.de>	2 years ago
Nick	a2779def36	Test views of LFS files (#22196)	2 years ago
flynnnnnnnnnn	e81ccc406b	Implement FSFE REUSE for golang files (#21840) ... Change all license headers to comply with REUSE specification. Fix #16132 Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github> Co-authored-by: John Olheiser <john.olheiser@gmail.com>	2 years ago
Kyle D	c8ded77680	Kd/ci playwright go test (#20123) ... * Add initial playwright config * Simplify Makefile * Simplify Makefile * Use correct config files * Update playwright settings * Fix package-lock file * Don't use test logger for e2e tests * fix frontend lint * Allow passing TEST_LOGGER variable * Init postgres database * use standard gitea env variables * Update playwright * update drone * Move empty env var to commands * Cleanup * Move integrations to subfolder * tests integrations to tests integraton * Run e2e tests with go test * Fix linting * install CI deps * Add files to ESlint * Fix drone typo * Don't log to console in CI * Use go test http server * Add build step before tests * Move shared init function to common package * fix drone * Clean up tests * Fix linting * Better mocking for page + version string * Cleanup test generation * Remove dependency on gitea binary * Fix linting * add initial support for running specific tests * Add ACCEPT_VISUAL variable * don't require git-lfs * Add initial documentation * Review feedback * Add logged in session test * Attempt fixing drone race * Cleanup and bump version * Bump deps * Review feedback * simplify installation * Fix ci * Update install docs	2 years ago