Gitea instance keeps reporting a lot of errors like "LFS SSH transfer connection denied, pure SSH protocol is disabled". When starting debugging the problem, there are more problems found. Try to address most of them:
* avoid unnecessary server side error logs (change `fail()` to not log them)
* figure out the broken tests/user2/lfs.git (added comments)
* avoid `migratePushMirrors` failure when a repository doesn't exist (ignore them)
* avoid "Authorization" (internal&lfs) header conflicts, remove the tricky "swapAuth" and use "X-Gitea-Internal-Auth"
* make internal token comparing constant time (it wasn't a serous problem because in a real world it's nearly impossible to timing-attack the token, but good to fix and backport)
* avoid duplicate routers (introduce AddOwnerRepoGitLFSRoutes)
* avoid "internal (private)" routes using session/web context (they should use private context)
* fix incorrect "path" usages (use "filepath")
* fix incorrect mocked route point handling (need to check func nil correctly)
* split some tests from "git general tests" to "git misc tests" (to keep "git_general_test.go" simple)
Still no correct result for Git LFS SSH tests. So the code is kept there
(`tests/integration/git_lfs_ssh_test.go`) and a FIXME explains the details.
Refactoring of #32211
this move the PublicOnly() filter calcuation next to the DB querys and
let it be decided by the Doer
---
*Sponsored by Kithara Software GmbH*
Resolve#30350
The action unit of mirrors and templates should be disabled by default.
This PR adds `DEFAULT_MIRROR_REPO_UNITS` and
`DEFAULT_TEMPLATE_REPO_UNITS` options to allow users to specify default
units for mirrors and templates.
Thanks to @lng2020 for the
[idea](https://github.com/go-gitea/gitea/issues/30350#issuecomment-2053942243)
- [x] Move `CreateRepositoryByExample` to service layer
- [x] Move `AddCollabrator` to service layer
- [x] Add a new parameter for `AddCollabrator` so that changing mode
immediately after that will become unnecessary.
Use zero instead of 9999-12-31 for deadline
Fix#32291
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Closes https://github.com/go-gitea/gitea/issues/30296
- Adds a DB fixture for actions artifacts
- Adds artifacts test files
- Clears artifacts test files between each run
- Note: I initially initialized the artifacts only for artifacts tests,
but because the files are small it only takes ~8ms, so I changed it to
always run in test setup for simplicity
- Fix some otherwise flaky tests by making them not depend on previous
tests
before if it was nonglob each load would try to glob it and the check
that is not glob ... now we only do that once and no future loading will
trigger it
---
*Sponsored by Kithara Software GmbH*
This introduces a new flag `BlockAdminMergeOverride` on the branch
protection rules that prevents admins/repo owners from bypassing branch
protection rules and merging without approvals or failing status checks.
Fixes#17131
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This is a large and complex PR, so let me explain in detail its changes.
First, I had to create new index mappings for Bleve and ElasticSerach as
the current ones do not support search by filename. This requires Gitea
to recreate the code search indexes (I do not know if this is a breaking
change, but I feel it deserves a heads-up).
I've used [this
approach](https://www.elastic.co/guide/en/elasticsearch/reference/7.17/analysis-pathhierarchy-tokenizer.html)
to model the filename index. It allows us to efficiently search for both
the full path and the name of a file. Bleve, however, does not support
this out-of-box, so I had to code a brand new [token
filter](https://blevesearch.com/docs/Token-Filters/) to generate the
search terms.
I also did an overhaul in the `indexer_test.go` file. It now asserts the
order of the expected results (this is important since matches based on
the name of a file are more relevant than those based on its content).
I've added new test scenarios that deal with searching by filename. They
use a new repo included in the Gitea fixture.
The screenshot below depicts how Gitea shows the search results. It
shows results based on content in the same way as the current version
does. In matches based on the filename, the first seven lines of the
file contents are shown (BTW, this is how GitHub does it).
Resolves#32096
---------
Signed-off-by: Bruno Sofiato <bruno.sofiato@gmail.com>
This PR fixes javascript errors when an anonymous user visits the
migration page.
It also makes task view checking more restrictive.
The router moved from `/user/task/{id}/status` to
`/username/reponame/-/migrate/status` because it's a migrate status.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR do some minor improvements for head branch display on pull
request view UI.
- [x] Remove the link if the head branch has been deleted with a
tooltip, so that users will not result in a 404 page
- [x] Display a label if this pull request is an agit based one.
I'm new to go and contributing to gitea, your guidance is much
appreciated.
This is meant to solve https://github.com/go-gitea/gitea/issues/13309
Previously, closed issues would not be shown under new issues in the
activity tab, even if they were newly created.
changes:
* Split out newlyCreatedIssues from issuesForActivityStatement to count
both currently open and closed issues.
* Use a seperate function to count active issues to prevent
double-counting issues after the above change.
Result is that new issues that have been closed are shown both under
"new" and "closed".
Signed-off-by: Timon van der Berg <tmnvanderberg@gmail.com>
A regression in #31924 caused there to be two `issues.review.comment`
keys in the English language locale file, leading to a problem when
reading PR review histories that contain comments.
This snapshot addresses this by making the newer key unique.
This will allow instance admins to view signup pattern patterns for
public instances. It is modelled after discourse, mastodon, and
MediaWiki's approaches.
Note: This has privacy implications, but as the above-stated open-source
projects take this approach, especially MediaWiki, which I have no doubt
looked into this thoroughly, it is likely okay for us, too. However, I
would be appreciative of any feedback on how this could be improved.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#31730
This PR rewrote the function `PublicKeysAreExternallyManaged` with a
simple test. The new function removed the loop to make it more readable.
When transferring repositories that have issues linked to a project
board to another organization, the issues remain associated with the
original project board. This causes the columns in the project board to
become bugged, making it difficult to move other issues in or out of the
affected columns. As a solution, I removed the issue relations since the
other organization does not have this project table.
Fix for #31538
Co-authored-by: Jason Song <i@wolfogre.com>
Support compression for Actions logs to save storage space and
bandwidth. Inspired by
https://github.com/go-gitea/gitea/issues/24256#issuecomment-1521153015
The biggest challenge is that the compression format should support
[seekable](https://github.com/facebook/zstd/blob/dev/contrib/seekable_format/zstd_seekable_compression_format.md).
So when users are viewing a part of the log lines, Gitea doesn't need to
download the whole compressed file and decompress it.
That means gzip cannot help here. And I did research, there aren't too
many choices, like bgzip and xz, but I think zstd is the most popular
one. It has an implementation in Golang with
[zstd](https://github.com/klauspost/compress/tree/master/zstd) and
[zstd-seekable-format-go](https://github.com/SaveTheRbtz/zstd-seekable-format-go),
and what is better is that it has good compatibility: a seekable format
zstd file can be read by a regular zstd reader.
This PR introduces a new package `zstd` to combine and wrap the two
packages, to provide a unified and easy-to-use API.
And a new setting `LOG_COMPRESSION` is added to the config, although I
don't see any reason why not to use compression, I think's it's a good
idea to keep the default with `none` to be consistent with old versions.
`LOG_COMPRESSION` takes effect for only new log files, it adds `.zst` as
an extension to the file name, so Gitea can determine if it needs
decompression according to the file name when reading. Old files will
keep the format since it's not worth converting them, as they will be
cleared after #31735.
<img width="541" alt="image"
src="https://github.com/user-attachments/assets/e9598764-a4e0-4b68-8c2b-f769265183c9">
If the assign the pull request review to a team, it did not show the
members of the team in the "requested_reviewers" field, so the field was
null. As a solution, I added the team members to the array.
fix#31764
Fix#31657.
According to the
[doc](https://docs.github.com/en/actions/writing-workflows/workflow-syntax-for-github-actions#onschedule)
of GitHub Actions, The timezone for cron should be UTC, not the local
timezone. And Gitea Actions doesn't have any reasons to change this, so
I think it's a bug.
However, Gitea Actions has extended the syntax, as it supports
descriptors like `@weekly` and `@every 5m`, and supports specifying the
timezone like `TZ=UTC 0 10 * * *`. So we can make it use UTC only when
the timezone is not specified, to be compatible with GitHub Actions, and
also respect the user's specified.
It does break the feature because the times to run tasks would be
changed, and it may confuse users. So I don't think we should backport
this.
## ⚠️ BREAKING ⚠️
If the server's local time zone is not UTC, a scheduled task would run
at a different time after upgrading Gitea to this version.
wxiaoguang
ChristopherHX
6543
Zettat123
Lunny Xiao
Kyle D.
Oleksandr Redko
Tim
wangjingcun
Bruno Sofiato
yp05327
Timon van der Berg
Kemal Zebari
Lauris BH
techknowlogick
william-allspice
Saulius Gurklys
Edip Emre Bodur
Jason Song
FuXiaoHei
Edip Emre Bodur