Official Go implementation of the Ethereum protocol
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
go-ethereum/trie/sync.go

348 lines
11 KiB

// Copyright 2015 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package trie
import (
"errors"
"fmt"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/prque"
"github.com/ethereum/go-ethereum/ethdb"
)
// ErrNotRequested is returned by the trie sync when it's requested to process a
// node it did not request.
var ErrNotRequested = errors.New("not requested")
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
// ErrAlreadyProcessed is returned by the trie sync when it's requested to process a
// node it already processed previously.
var ErrAlreadyProcessed = errors.New("already processed")
// request represents a scheduled or already in-flight state retrieval request.
type request struct {
hash common.Hash // Hash of the node data content to retrieve
data []byte // Data content of the node, cached until all subtrees complete
raw bool // Whether this is a raw entry (code) or a trie node
parents []*request // Parent state nodes referencing this entry (notify all upon completion)
depth int // Depth level within the trie the node is located to prioritise DFS
deps int // Number of dependencies before allowed to commit this node
callback LeafCallback // Callback to invoke if a leaf node it reached on this branch
}
// SyncResult is a simple list to return missing nodes along with their request
// hashes.
type SyncResult struct {
Hash common.Hash // Hash of the originally unknown trie node
Data []byte // Data content of the retrieved node
}
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
// syncMemBatch is an in-memory buffer of successfully downloaded but not yet
// persisted data items.
type syncMemBatch struct {
batch map[common.Hash][]byte // In-memory membatch of recently completed items
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
order []common.Hash // Order of completion to prevent out-of-order data loss
}
// newSyncMemBatch allocates a new memory-buffer for not-yet persisted trie nodes.
func newSyncMemBatch() *syncMemBatch {
return &syncMemBatch{
batch: make(map[common.Hash][]byte),
order: make([]common.Hash, 0, 256),
}
}
// Sync is the main state trie synchronisation scheduler, which provides yet
// unknown trie hashes to retrieve, accepts node data associated with said hashes
// and reconstructs the trie step by step until all is done.
type Sync struct {
database ethdb.KeyValueReader // Persistent database to check for existing entries
membatch *syncMemBatch // Memory buffer to avoid frequent database writes
requests map[common.Hash]*request // Pending requests pertaining to a key hash
queue *prque.Prque // Priority queue with the pending requests
bloom *SyncBloom // Bloom filter for fast node existence checks
}
// NewSync creates a new trie data download scheduler.
func NewSync(root common.Hash, database ethdb.KeyValueReader, callback LeafCallback, bloom *SyncBloom) *Sync {
ts := &Sync{
database: database,
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
membatch: newSyncMemBatch(),
requests: make(map[common.Hash]*request),
queue: prque.New(nil),
bloom: bloom,
}
ts.AddSubTrie(root, 0, common.Hash{}, callback)
return ts
}
// AddSubTrie registers a new trie to the sync code, rooted at the designated parent.
func (s *Sync) AddSubTrie(root common.Hash, depth int, parent common.Hash, callback LeafCallback) {
// Short circuit if the trie is empty or already known
if root == emptyRoot {
return
}
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
if _, ok := s.membatch.batch[root]; ok {
return
}
if s.bloom.Contains(root[:]) {
// Bloom filter says this might be a duplicate, double check
blob, _ := s.database.Get(root[:])
if local, err := decodeNode(root[:], blob); local != nil && err == nil {
return
}
// False positive, bump fault meter
bloomFaultMeter.Mark(1)
}
// Assemble the new sub-trie sync request
req := &request{
hash: root,
depth: depth,
callback: callback,
}
// If this sub-trie has a designated parent, link them together
if parent != (common.Hash{}) {
ancestor := s.requests[parent]
if ancestor == nil {
panic(fmt.Sprintf("sub-trie ancestor not found: %x", parent))
}
ancestor.deps++
req.parents = append(req.parents, ancestor)
}
s.schedule(req)
}
// AddRawEntry schedules the direct retrieval of a state entry that should not be
// interpreted as a trie node, but rather accepted and stored into the database
// as is. This method's goal is to support misc state metadata retrievals (e.g.
// contract code).
func (s *Sync) AddRawEntry(hash common.Hash, depth int, parent common.Hash) {
// Short circuit if the entry is empty or already known
if hash == emptyState {
return
}
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
if _, ok := s.membatch.batch[hash]; ok {
return
}
if s.bloom.Contains(hash[:]) {
// Bloom filter says this might be a duplicate, double check
if ok, _ := s.database.Has(hash[:]); ok {
return
}
// False positive, bump fault meter
bloomFaultMeter.Mark(1)
}
// Assemble the new sub-trie sync request
req := &request{
hash: hash,
raw: true,
depth: depth,
}
// If this sub-trie has a designated parent, link them together
if parent != (common.Hash{}) {
ancestor := s.requests[parent]
if ancestor == nil {
panic(fmt.Sprintf("raw-entry ancestor not found: %x", parent))
}
ancestor.deps++
req.parents = append(req.parents, ancestor)
}
s.schedule(req)
}
// Missing retrieves the known missing nodes from the trie for retrieval.
func (s *Sync) Missing(max int) []common.Hash {
var requests []common.Hash
for !s.queue.Empty() && (max == 0 || len(requests) < max) {
requests = append(requests, s.queue.PopItem().(common.Hash))
}
return requests
}
// Process injects a batch of retrieved trie nodes data, returning if something
// was committed to the database and also the index of an entry if processing of
// it failed.
func (s *Sync) Process(results []SyncResult) (bool, int, error) {
committed := false
for i, item := range results {
// If the item was not requested, bail out
request := s.requests[item.Hash]
if request == nil {
return committed, i, ErrNotRequested
}
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
if request.data != nil {
return committed, i, ErrAlreadyProcessed
}
// If the item is a raw entry request, commit directly
if request.raw {
request.data = item.Data
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
s.commit(request)
committed = true
continue
}
// Decode the node data content and update the request
node, err := decodeNode(item.Hash[:], item.Data)
if err != nil {
return committed, i, err
}
request.data = item.Data
// Create and schedule a request for all the children nodes
requests, err := s.children(request, node)
if err != nil {
return committed, i, err
}
if len(requests) == 0 && request.deps == 0 {
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
s.commit(request)
committed = true
continue
}
request.deps += len(requests)
for _, child := range requests {
s.schedule(child)
}
}
return committed, 0, nil
}
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
// Commit flushes the data stored in the internal membatch out to persistent
// storage, returning the number of items written and any occurred error.
func (s *Sync) Commit(dbw ethdb.KeyValueWriter) (int, error) {
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
// Dump the membatch into a database dbw
for i, key := range s.membatch.order {
if err := dbw.Put(key[:], s.membatch.batch[key]); err != nil {
return i, err
}
s.bloom.Add(key[:])
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
}
written := len(s.membatch.order) // TODO(karalabe): could an order change improve write performance?
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
// Drop the membatch data and return
s.membatch = newSyncMemBatch()
return written, nil
}
// Pending returns the number of state entries currently pending for download.
func (s *Sync) Pending() int {
return len(s.requests)
}
// schedule inserts a new state retrieval request into the fetch queue. If there
// is already a pending request for this node, the new request will be discarded
// and only a parent reference added to the old one.
func (s *Sync) schedule(req *request) {
// If we're already requesting this node, add a new reference and stop
if old, ok := s.requests[req.hash]; ok {
old.parents = append(old.parents, req.parents...)
return
}
// Schedule the request for future retrieval
s.queue.Push(req.hash, int64(req.depth))
s.requests[req.hash] = req
}
// children retrieves all the missing children of a state trie entry for future
// retrieval scheduling.
func (s *Sync) children(req *request, object node) ([]*request, error) {
// Gather all the children of the node, irrelevant whether known or not
type child struct {
node node
depth int
}
var children []child
switch node := (object).(type) {
case *shortNode:
children = []child{{
node: node.Val,
depth: req.depth + len(node.Key),
}}
case *fullNode:
for i := 0; i < 17; i++ {
if node.Children[i] != nil {
children = append(children, child{
node: node.Children[i],
depth: req.depth + 1,
})
}
}
default:
panic(fmt.Sprintf("unknown node: %+v", node))
}
// Iterate over the children, and request all unknown ones
requests := make([]*request, 0, len(children))
for _, child := range children {
// Notify any external watcher of a new key/value node
if req.callback != nil {
if node, ok := (child.node).(valueNode); ok {
if err := req.callback(node, req.hash); err != nil {
return nil, err
}
}
}
// If the child references another node, resolve or schedule
if node, ok := (child.node).(hashNode); ok {
// Try to resolve the node from the local database
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
hash := common.BytesToHash(node)
if _, ok := s.membatch.batch[hash]; ok {
continue
}
if s.bloom.Contains(node) {
// Bloom filter says this might be a duplicate, double check
if ok, _ := s.database.Has(node); ok {
continue
}
// False positive, bump fault meter
bloomFaultMeter.Mark(1)
}
// Locally unknown node, schedule for retrieval
requests = append(requests, &request{
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
hash: hash,
parents: []*request{req},
depth: child.depth,
callback: req.callback,
})
}
}
return requests, nil
}
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
// commit finalizes a retrieval request and stores it into the membatch. If any
// of the referencing parent requests complete due to this commit, they are also
// committed themselves.
func (s *Sync) commit(req *request) (err error) {
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
// Write the node content to the membatch
s.membatch.batch[req.hash] = req.data
s.membatch.order = append(s.membatch.order, req.hash)
delete(s.requests, req.hash)
// Check all parents for completion
for _, parent := range req.parents {
parent.deps--
if parent.deps == 0 {
eth/downloader: separate state sync from queue (#14460) * eth/downloader: separate state sync from queue Scheduling of state node downloads hogged the downloader queue lock when new requests were scheduled. This caused timeouts for other requests. With this change, state sync is fully independent of all other downloads and doesn't involve the queue at all. State sync is started and checked on in processContent. This is slightly awkward because processContent doesn't have a select loop. Instead, the queue is closed by an auxiliary goroutine when state sync fails. We tried several alternatives to this but settled on the current approach because it's the least amount of change overall. Handling of the pivot block has changed slightly: the queue previously prevented import of pivot block receipts before the state of the pivot block was available. In this commit, the receipt will be imported before the state. This causes an annoyance where the pivot block is committed as fast block head even when state downloads fail. Stay tuned for more updates in this area ;) * eth/downloader: remove cancelTimeout channel * eth/downloader: retry state requests on timeout * eth/downloader: improve comment * eth/downloader: mark peers idle when state sync is done * eth/downloader: move pivot block splitting to processContent This change also ensures that pivot block receipts aren't imported before the pivot block itself. * eth/downloader: limit state node retries * eth/downloader: improve state node error handling and retry check * eth/downloader: remove maxStateNodeRetries It fails the sync too much. * eth/downloader: remove last use of cancelCh in statesync.go Fixes TestDeliverHeadersHang*Fast and (hopefully) the weird cancellation behaviour at the end of fast sync. * eth/downloader: fix leak in runStateSync * eth/downloader: don't run processFullSyncContent in LightSync mode * eth/downloader: improve comments * eth/downloader: fix vet, megacheck * eth/downloader: remove unrequested tasks anyway * eth/downloader, trie: various polishes around duplicate items This commit explicitly tracks duplicate and unexpected state delieveries done against a trie Sync structure, also adding there to import info logs. The commit moves the db batch used to commit trie changes one level deeper so its flushed after every node insertion. This is needed to avoid a lot of duplicate retrievals caused by inconsistencies between Sync internals and database. A better approach is to track not-yet-written states in trie.Sync and flush on commit, but I'm focuing on correctness first now. The commit fixes a regression around pivot block fail count. The counter previously was reset to 1 if and only if a sync cycle progressed (inserted at least 1 entry to the database). The current code reset it already if a node was delivered, which is not stong enough, because unless it ends up written to disk, an attacker can just loop and attack ad infinitum. The commit also fixes a regression around state deliveries and timeouts. The old downloader tracked if a delivery is stale (none of the deliveries were requestedt), in which case it didn't mark the node idle and did not send further requests, since it signals a past timeout. The current code did mark it idle even on stale deliveries, which eventually caused two requests to be in flight at the same time, making the deliveries always stale and mass duplicating retrievals between multiple peers. * eth/downloader: fix state request leak This commit fixes the hang seen sometimes while doing the state sync. The cause of the hang was a rare combination of events: request state data from peer, peer drops and reconnects almost immediately. This caused a new download task to be assigned to the peer, overwriting the old one still waiting for a timeout, which in turned leaked the requests out, never to be retried. The fix is to ensure that a task assignment moves any pending one back into the retry queue. The commit also fixes a regression with peer dropping due to stalls. The current code considered a peer stalling if they timed out delivering 1 item. However, the downloader never requests only one, the minimum is 2 (attempt to fine tune estimated latency/bandwidth). The fix is simply to drop if a timeout is detected at 2 items. Apart from the above bugfixes, the commit contains some code polishes I made while debugging the hang. * core, eth, trie: support batched trie sync db writes * trie: rename SyncMemCache to syncMemBatch
8 years ago
if err := s.commit(parent); err != nil {
return err
}
}
}
return nil
}