Official Go implementation of the Ethereum protocol
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
go-ethereum/eth/handler_eth_test.go

441 lines
15 KiB

// Copyright 2020 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package eth
import (
"fmt"
"math/big"
"testing"
"time"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/consensus/ethash"
"github.com/ethereum/go-ethereum/core"
"github.com/ethereum/go-ethereum/core/forkid"
"github.com/ethereum/go-ethereum/core/rawdb"
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/core/vm"
"github.com/ethereum/go-ethereum/eth/downloader"
"github.com/ethereum/go-ethereum/eth/protocols/eth"
"github.com/ethereum/go-ethereum/event"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/params"
)
// testEthHandler is a mock event handler to listen for inbound network requests
// on the `eth` protocol and convert them into a more easily testable form.
type testEthHandler struct {
blockBroadcasts event.Feed
txAnnounces event.Feed
txBroadcasts event.Feed
}
func (h *testEthHandler) Chain() *core.BlockChain { panic("no backing chain") }
func (h *testEthHandler) TxPool() eth.TxPool { panic("no backing tx pool") }
func (h *testEthHandler) AcceptTxs() bool { return true }
func (h *testEthHandler) RunPeer(*eth.Peer, eth.Handler) error { panic("not used in tests") }
func (h *testEthHandler) PeerInfo(enode.ID) interface{} { panic("not used in tests") }
func (h *testEthHandler) Handle(peer *eth.Peer, packet eth.Packet) error {
switch packet := packet.(type) {
case *eth.NewBlockPacket:
h.blockBroadcasts.Send(packet.Block)
return nil
case *eth.NewPooledTransactionHashesPacket:
h.txAnnounces.Send(packet.Hashes)
return nil
case *eth.TransactionsPacket:
h.txBroadcasts.Send(([]*types.Transaction)(*packet))
return nil
case *eth.PooledTransactionsResponse:
h.txBroadcasts.Send(([]*types.Transaction)(*packet))
return nil
default:
panic(fmt.Sprintf("unexpected eth packet type in tests: %T", packet))
}
}
// Tests that peers are correctly accepted (or rejected) based on the advertised
// fork IDs in the protocol handshake.
func TestForkIDSplit68(t *testing.T) { testForkIDSplit(t, eth.ETH68) }
func testForkIDSplit(t *testing.T, protocol uint) {
t.Parallel()
var (
engine = ethash.NewFaker()
configNoFork = &params.ChainConfig{HomesteadBlock: big.NewInt(1)}
configProFork = &params.ChainConfig{
HomesteadBlock: big.NewInt(1),
EIP150Block: big.NewInt(2),
EIP155Block: big.NewInt(2),
EIP158Block: big.NewInt(2),
ByzantiumBlock: big.NewInt(3),
}
dbNoFork = rawdb.NewMemoryDatabase()
dbProFork = rawdb.NewMemoryDatabase()
gspecNoFork = &core.Genesis{Config: configNoFork}
gspecProFork = &core.Genesis{Config: configProFork}
chainNoFork, _ = core.NewBlockChain(dbNoFork, nil, gspecNoFork, nil, engine, vm.Config{}, nil, nil)
chainProFork, _ = core.NewBlockChain(dbProFork, nil, gspecProFork, nil, engine, vm.Config{}, nil, nil)
_, blocksNoFork, _ = core.GenerateChainWithGenesis(gspecNoFork, engine, 2, nil)
_, blocksProFork, _ = core.GenerateChainWithGenesis(gspecProFork, engine, 2, nil)
ethNoFork, _ = newHandler(&handlerConfig{
Database: dbNoFork,
Chain: chainNoFork,
TxPool: newTestTxPool(),
Network: 1,
Sync: downloader.FullSync,
BloomCache: 1,
})
ethProFork, _ = newHandler(&handlerConfig{
Database: dbProFork,
Chain: chainProFork,
TxPool: newTestTxPool(),
Network: 1,
Sync: downloader.FullSync,
BloomCache: 1,
})
)
ethNoFork.Start(1000)
ethProFork.Start(1000)
// Clean up everything after ourselves
defer chainNoFork.Stop()
defer chainProFork.Stop()
defer ethNoFork.Stop()
defer ethProFork.Stop()
// Both nodes should allow the other to connect (same genesis, next fork is the same)
p2pNoFork, p2pProFork := p2p.MsgPipe()
defer p2pNoFork.Close()
defer p2pProFork.Close()
peerNoFork := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{1}, "", nil, p2pNoFork), p2pNoFork, nil)
peerProFork := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{2}, "", nil, p2pProFork), p2pProFork, nil)
defer peerNoFork.Close()
defer peerProFork.Close()
errc := make(chan error, 2)
go func(errc chan error) {
errc <- ethNoFork.runEthPeer(peerProFork, func(peer *eth.Peer) error { return nil })
}(errc)
go func(errc chan error) {
errc <- ethProFork.runEthPeer(peerNoFork, func(peer *eth.Peer) error { return nil })
}(errc)
for i := 0; i < 2; i++ {
select {
case err := <-errc:
if err != nil {
t.Fatalf("frontier nofork <-> profork failed: %v", err)
}
case <-time.After(250 * time.Millisecond):
t.Fatalf("frontier nofork <-> profork handler timeout")
}
}
// Progress into Homestead. Fork's match, so we don't care what the future holds
chainNoFork.InsertChain(blocksNoFork[:1])
chainProFork.InsertChain(blocksProFork[:1])
p2pNoFork, p2pProFork = p2p.MsgPipe()
defer p2pNoFork.Close()
defer p2pProFork.Close()
peerNoFork = eth.NewPeer(protocol, p2p.NewPeer(enode.ID{1}, "", nil), p2pNoFork, nil)
peerProFork = eth.NewPeer(protocol, p2p.NewPeer(enode.ID{2}, "", nil), p2pProFork, nil)
defer peerNoFork.Close()
defer peerProFork.Close()
errc = make(chan error, 2)
go func(errc chan error) {
errc <- ethNoFork.runEthPeer(peerProFork, func(peer *eth.Peer) error { return nil })
}(errc)
go func(errc chan error) {
errc <- ethProFork.runEthPeer(peerNoFork, func(peer *eth.Peer) error { return nil })
}(errc)
for i := 0; i < 2; i++ {
select {
case err := <-errc:
if err != nil {
t.Fatalf("homestead nofork <-> profork failed: %v", err)
}
case <-time.After(250 * time.Millisecond):
t.Fatalf("homestead nofork <-> profork handler timeout")
}
}
// Progress into Spurious. Forks mismatch, signalling differing chains, reject
chainNoFork.InsertChain(blocksNoFork[1:2])
chainProFork.InsertChain(blocksProFork[1:2])
p2pNoFork, p2pProFork = p2p.MsgPipe()
defer p2pNoFork.Close()
defer p2pProFork.Close()
peerNoFork = eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{1}, "", nil, p2pNoFork), p2pNoFork, nil)
peerProFork = eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{2}, "", nil, p2pProFork), p2pProFork, nil)
defer peerNoFork.Close()
defer peerProFork.Close()
errc = make(chan error, 2)
go func(errc chan error) {
errc <- ethNoFork.runEthPeer(peerProFork, func(peer *eth.Peer) error { return nil })
}(errc)
go func(errc chan error) {
errc <- ethProFork.runEthPeer(peerNoFork, func(peer *eth.Peer) error { return nil })
}(errc)
var successes int
for i := 0; i < 2; i++ {
select {
case err := <-errc:
if err == nil {
successes++
if successes == 2 { // Only one side disconnects
t.Fatalf("fork ID rejection didn't happen")
}
}
case <-time.After(250 * time.Millisecond):
t.Fatalf("split peers not rejected")
}
}
}
// Tests that received transactions are added to the local pool.
func TestRecvTransactions68(t *testing.T) { testRecvTransactions(t, eth.ETH68) }
func testRecvTransactions(t *testing.T, protocol uint) {
t.Parallel()
// Create a message handler, configure it to accept transactions and watch them
handler := newTestHandler()
defer handler.close()
handler.handler.synced.Store(true) // mark synced to accept transactions
txs := make(chan core.NewTxsEvent)
sub := handler.txpool.SubscribeTransactions(txs, false)
defer sub.Unsubscribe()
// Create a source peer to send messages through and a sink handler to receive them
p2pSrc, p2pSink := p2p.MsgPipe()
defer p2pSrc.Close()
defer p2pSink.Close()
src := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{1}, "", nil, p2pSrc), p2pSrc, handler.txpool)
sink := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{2}, "", nil, p2pSink), p2pSink, handler.txpool)
defer src.Close()
defer sink.Close()
go handler.handler.runEthPeer(sink, func(peer *eth.Peer) error {
return eth.Handle((*ethHandler)(handler.handler), peer)
})
// Run the handshake locally to avoid spinning up a source handler
var (
genesis = handler.chain.Genesis()
head = handler.chain.CurrentBlock()
td = handler.chain.GetTd(head.Hash(), head.Number.Uint64())
)
if err := src.Handshake(1, td, head.Hash(), genesis.Hash(), forkid.NewIDWithChain(handler.chain), forkid.NewFilter(handler.chain)); err != nil {
t.Fatalf("failed to run protocol handshake")
}
// Send the transaction to the sink and verify that it's added to the tx pool
tx := types.NewTransaction(0, common.Address{}, big.NewInt(0), 100000, big.NewInt(0), nil)
tx, _ = types.SignTx(tx, types.HomesteadSigner{}, testKey)
if err := src.SendTransactions([]*types.Transaction{tx}); err != nil {
t.Fatalf("failed to send transaction: %v", err)
}
select {
case event := <-txs:
if len(event.Txs) != 1 {
t.Errorf("wrong number of added transactions: got %d, want 1", len(event.Txs))
} else if event.Txs[0].Hash() != tx.Hash() {
t.Errorf("added wrong tx hash: got %v, want %v", event.Txs[0].Hash(), tx.Hash())
}
case <-time.After(2 * time.Second):
t.Errorf("no NewTxsEvent received within 2 seconds")
}
}
// This test checks that pending transactions are sent.
func TestSendTransactions68(t *testing.T) { testSendTransactions(t, eth.ETH68) }
func testSendTransactions(t *testing.T, protocol uint) {
t.Parallel()
// Create a message handler and fill the pool with big transactions
handler := newTestHandler()
defer handler.close()
core/types: support for optional blob sidecar in BlobTx (#27841) This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way of keeping the blob sidecar within types.Transaction. It's better this way because most code in go-ethereum does not care about blob transactions, and probably never will. This will start mattering especially on the client side of RPC, where all APIs are based on types.Transaction. Users need to be able to use the same signing flows they already have. However, since blobs are only allowed in some places but not others, we will now need to add checks to avoid creating invalid blocks. I'm still trying to figure out the best place to do some of these. The way I have it currently is as follows: - In block validation (import), txs are verified not to have a blob sidecar. - In miner, we strip off the sidecar when committing the transaction into the block. - In TxPool validation, txs must have a sidecar to be added into the blobpool. - Note there is a special case here: when transactions are re-added because of a chain reorg, we cannot use the transactions gathered from the old chain blocks as-is, because they will be missing their blobs. This was previously handled by storing the blobs into the 'blobpool limbo'. The code has now changed to store the full transaction in the limbo instead, but it might be confusing for code readers why we're not simply adding the types.Transaction we already have. Code changes summary: - txpool.Transaction removed and all uses replaced by types.Transaction again - blobpool now stores types.Transaction instead of defining its own blobTx format for storage - the blobpool limbo now stores types.Transaction instead of storing only the blobs - checks to validate the presence/absence of the blob sidecar added in certain critical places
1 year ago
insert := make([]*types.Transaction, 100)
for nonce := range insert {
tx := types.NewTransaction(uint64(nonce), common.Address{}, big.NewInt(0), 100000, big.NewInt(0), make([]byte, 10240))
tx, _ = types.SignTx(tx, types.HomesteadSigner{}, testKey)
core/types: support for optional blob sidecar in BlobTx (#27841) This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way of keeping the blob sidecar within types.Transaction. It's better this way because most code in go-ethereum does not care about blob transactions, and probably never will. This will start mattering especially on the client side of RPC, where all APIs are based on types.Transaction. Users need to be able to use the same signing flows they already have. However, since blobs are only allowed in some places but not others, we will now need to add checks to avoid creating invalid blocks. I'm still trying to figure out the best place to do some of these. The way I have it currently is as follows: - In block validation (import), txs are verified not to have a blob sidecar. - In miner, we strip off the sidecar when committing the transaction into the block. - In TxPool validation, txs must have a sidecar to be added into the blobpool. - Note there is a special case here: when transactions are re-added because of a chain reorg, we cannot use the transactions gathered from the old chain blocks as-is, because they will be missing their blobs. This was previously handled by storing the blobs into the 'blobpool limbo'. The code has now changed to store the full transaction in the limbo instead, but it might be confusing for code readers why we're not simply adding the types.Transaction we already have. Code changes summary: - txpool.Transaction removed and all uses replaced by types.Transaction again - blobpool now stores types.Transaction instead of defining its own blobTx format for storage - the blobpool limbo now stores types.Transaction instead of storing only the blobs - checks to validate the presence/absence of the blob sidecar added in certain critical places
1 year ago
insert[nonce] = tx
}
go handler.txpool.Add(insert, false, false) // Need goroutine to not block on feed
time.Sleep(250 * time.Millisecond) // Wait until tx events get out of the system (can't use events, tx broadcaster races with peer join)
// Create a source handler to send messages through and a sink peer to receive them
p2pSrc, p2pSink := p2p.MsgPipe()
defer p2pSrc.Close()
defer p2pSink.Close()
src := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{1}, "", nil, p2pSrc), p2pSrc, handler.txpool)
sink := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{2}, "", nil, p2pSink), p2pSink, handler.txpool)
defer src.Close()
defer sink.Close()
go handler.handler.runEthPeer(src, func(peer *eth.Peer) error {
return eth.Handle((*ethHandler)(handler.handler), peer)
})
// Run the handshake locally to avoid spinning up a source handler
var (
genesis = handler.chain.Genesis()
head = handler.chain.CurrentBlock()
td = handler.chain.GetTd(head.Hash(), head.Number.Uint64())
)
if err := sink.Handshake(1, td, head.Hash(), genesis.Hash(), forkid.NewIDWithChain(handler.chain), forkid.NewFilter(handler.chain)); err != nil {
t.Fatalf("failed to run protocol handshake")
}
// After the handshake completes, the source handler should stream the sink
// the transactions, subscribe to all inbound network events
backend := new(testEthHandler)
anns := make(chan []common.Hash)
annSub := backend.txAnnounces.Subscribe(anns)
defer annSub.Unsubscribe()
bcasts := make(chan []*types.Transaction)
bcastSub := backend.txBroadcasts.Subscribe(bcasts)
defer bcastSub.Unsubscribe()
go eth.Handle(backend, sink)
// Make sure we get all the transactions on the correct channels
seen := make(map[common.Hash]struct{})
for len(seen) < len(insert) {
switch protocol {
case 68:
select {
case hashes := <-anns:
for _, hash := range hashes {
if _, ok := seen[hash]; ok {
t.Errorf("duplicate transaction announced: %x", hash)
}
seen[hash] = struct{}{}
}
case <-bcasts:
t.Errorf("initial tx broadcast received on post eth/66")
}
default:
panic("unsupported protocol, please extend test")
}
}
for _, tx := range insert {
core/types: support for optional blob sidecar in BlobTx (#27841) This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way of keeping the blob sidecar within types.Transaction. It's better this way because most code in go-ethereum does not care about blob transactions, and probably never will. This will start mattering especially on the client side of RPC, where all APIs are based on types.Transaction. Users need to be able to use the same signing flows they already have. However, since blobs are only allowed in some places but not others, we will now need to add checks to avoid creating invalid blocks. I'm still trying to figure out the best place to do some of these. The way I have it currently is as follows: - In block validation (import), txs are verified not to have a blob sidecar. - In miner, we strip off the sidecar when committing the transaction into the block. - In TxPool validation, txs must have a sidecar to be added into the blobpool. - Note there is a special case here: when transactions are re-added because of a chain reorg, we cannot use the transactions gathered from the old chain blocks as-is, because they will be missing their blobs. This was previously handled by storing the blobs into the 'blobpool limbo'. The code has now changed to store the full transaction in the limbo instead, but it might be confusing for code readers why we're not simply adding the types.Transaction we already have. Code changes summary: - txpool.Transaction removed and all uses replaced by types.Transaction again - blobpool now stores types.Transaction instead of defining its own blobTx format for storage - the blobpool limbo now stores types.Transaction instead of storing only the blobs - checks to validate the presence/absence of the blob sidecar added in certain critical places
1 year ago
if _, ok := seen[tx.Hash()]; !ok {
t.Errorf("missing transaction: %x", tx.Hash())
}
}
}
// Tests that transactions get propagated to all attached peers, either via direct
// broadcasts or via announcements/retrievals.
func TestTransactionPropagation68(t *testing.T) { testTransactionPropagation(t, eth.ETH68) }
func testTransactionPropagation(t *testing.T, protocol uint) {
t.Parallel()
// Create a source handler to send transactions from and a number of sinks
// to receive them. We need multiple sinks since a one-to-one peering would
// broadcast all transactions without announcement.
source := newTestHandler()
source.handler.snapSync.Store(false) // Avoid requiring snap, otherwise some will be dropped below
defer source.close()
sinks := make([]*testHandler, 10)
for i := 0; i < len(sinks); i++ {
sinks[i] = newTestHandler()
defer sinks[i].close()
sinks[i].handler.synced.Store(true) // mark synced to accept transactions
}
// Interconnect all the sink handlers with the source handler
for i, sink := range sinks {
sink := sink // Closure for goroutine below
sourcePipe, sinkPipe := p2p.MsgPipe()
defer sourcePipe.Close()
defer sinkPipe.Close()
sourcePeer := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{byte(i + 1)}, "", nil, sourcePipe), sourcePipe, source.txpool)
sinkPeer := eth.NewPeer(protocol, p2p.NewPeerPipe(enode.ID{0}, "", nil, sinkPipe), sinkPipe, sink.txpool)
defer sourcePeer.Close()
defer sinkPeer.Close()
go source.handler.runEthPeer(sourcePeer, func(peer *eth.Peer) error {
return eth.Handle((*ethHandler)(source.handler), peer)
})
go sink.handler.runEthPeer(sinkPeer, func(peer *eth.Peer) error {
return eth.Handle((*ethHandler)(sink.handler), peer)
})
}
// Subscribe to all the transaction pools
txChs := make([]chan core.NewTxsEvent, len(sinks))
for i := 0; i < len(sinks); i++ {
txChs[i] = make(chan core.NewTxsEvent, 1024)
sub := sinks[i].txpool.SubscribeTransactions(txChs[i], false)
defer sub.Unsubscribe()
}
// Fill the source pool with transactions and wait for them at the sinks
core/types: support for optional blob sidecar in BlobTx (#27841) This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way of keeping the blob sidecar within types.Transaction. It's better this way because most code in go-ethereum does not care about blob transactions, and probably never will. This will start mattering especially on the client side of RPC, where all APIs are based on types.Transaction. Users need to be able to use the same signing flows they already have. However, since blobs are only allowed in some places but not others, we will now need to add checks to avoid creating invalid blocks. I'm still trying to figure out the best place to do some of these. The way I have it currently is as follows: - In block validation (import), txs are verified not to have a blob sidecar. - In miner, we strip off the sidecar when committing the transaction into the block. - In TxPool validation, txs must have a sidecar to be added into the blobpool. - Note there is a special case here: when transactions are re-added because of a chain reorg, we cannot use the transactions gathered from the old chain blocks as-is, because they will be missing their blobs. This was previously handled by storing the blobs into the 'blobpool limbo'. The code has now changed to store the full transaction in the limbo instead, but it might be confusing for code readers why we're not simply adding the types.Transaction we already have. Code changes summary: - txpool.Transaction removed and all uses replaced by types.Transaction again - blobpool now stores types.Transaction instead of defining its own blobTx format for storage - the blobpool limbo now stores types.Transaction instead of storing only the blobs - checks to validate the presence/absence of the blob sidecar added in certain critical places
1 year ago
txs := make([]*types.Transaction, 1024)
for nonce := range txs {
tx := types.NewTransaction(uint64(nonce), common.Address{}, big.NewInt(0), 100000, big.NewInt(0), nil)
tx, _ = types.SignTx(tx, types.HomesteadSigner{}, testKey)
core/types: support for optional blob sidecar in BlobTx (#27841) This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way of keeping the blob sidecar within types.Transaction. It's better this way because most code in go-ethereum does not care about blob transactions, and probably never will. This will start mattering especially on the client side of RPC, where all APIs are based on types.Transaction. Users need to be able to use the same signing flows they already have. However, since blobs are only allowed in some places but not others, we will now need to add checks to avoid creating invalid blocks. I'm still trying to figure out the best place to do some of these. The way I have it currently is as follows: - In block validation (import), txs are verified not to have a blob sidecar. - In miner, we strip off the sidecar when committing the transaction into the block. - In TxPool validation, txs must have a sidecar to be added into the blobpool. - Note there is a special case here: when transactions are re-added because of a chain reorg, we cannot use the transactions gathered from the old chain blocks as-is, because they will be missing their blobs. This was previously handled by storing the blobs into the 'blobpool limbo'. The code has now changed to store the full transaction in the limbo instead, but it might be confusing for code readers why we're not simply adding the types.Transaction we already have. Code changes summary: - txpool.Transaction removed and all uses replaced by types.Transaction again - blobpool now stores types.Transaction instead of defining its own blobTx format for storage - the blobpool limbo now stores types.Transaction instead of storing only the blobs - checks to validate the presence/absence of the blob sidecar added in certain critical places
1 year ago
txs[nonce] = tx
}
source.txpool.Add(txs, false, false)
// Iterate through all the sinks and ensure they all got the transactions
for i := range sinks {
for arrived, timeout := 0, false; arrived < len(txs) && !timeout; {
select {
case event := <-txChs[i]:
arrived += len(event.Txs)
case <-time.After(2 * time.Second):
t.Errorf("sink %d: transaction propagation timed out: have %d, want %d", i, arrived, len(txs))
timeout = true
}
}
}
}