Official Go implementation of the Ethereum protocol
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
go-ethereum/metrics/counter.go

113 lines
3.0 KiB

package metrics
import (
"sync/atomic"
)
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
type CounterSnapshot interface {
Count() int64
}
// Counter hold an int64 value that can be incremented and decremented.
type Counter interface {
Clear()
Dec(int64)
Inc(int64)
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
Snapshot() CounterSnapshot
}
// GetOrRegisterCounter returns an existing Counter or constructs and registers
// a new StandardCounter.
func GetOrRegisterCounter(name string, r Registry) Counter {
if nil == r {
r = DefaultRegistry
}
return r.GetOrRegister(name, NewCounter).(Counter)
}
// GetOrRegisterCounterForced returns an existing Counter or constructs and registers a
// new Counter no matter the global switch is enabled or not.
// Be sure to unregister the counter from the registry once it is of no use to
// allow for garbage collection.
func GetOrRegisterCounterForced(name string, r Registry) Counter {
if nil == r {
r = DefaultRegistry
}
return r.GetOrRegister(name, NewCounterForced).(Counter)
}
// NewCounter constructs a new StandardCounter.
func NewCounter() Counter {
if !Enabled {
return NilCounter{}
}
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
return new(StandardCounter)
}
// NewCounterForced constructs a new StandardCounter and returns it no matter if
// the global switch is enabled or not.
func NewCounterForced() Counter {
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
return new(StandardCounter)
}
// NewRegisteredCounter constructs and registers a new StandardCounter.
func NewRegisteredCounter(name string, r Registry) Counter {
c := NewCounter()
if nil == r {
r = DefaultRegistry
}
r.Register(name, c)
return c
}
// NewRegisteredCounterForced constructs and registers a new StandardCounter
// and launches a goroutine no matter the global switch is enabled or not.
// Be sure to unregister the counter from the registry once it is of no use to
// allow for garbage collection.
func NewRegisteredCounterForced(name string, r Registry) Counter {
c := NewCounterForced()
if nil == r {
r = DefaultRegistry
}
r.Register(name, c)
return c
}
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
// counterSnapshot is a read-only copy of another Counter.
type counterSnapshot int64
// Count returns the count at the time the snapshot was taken.
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
func (c counterSnapshot) Count() int64 { return int64(c) }
// NilCounter is a no-op Counter.
type NilCounter struct{}
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
func (NilCounter) Clear() {}
func (NilCounter) Dec(i int64) {}
func (NilCounter) Inc(i int64) {}
func (NilCounter) Snapshot() CounterSnapshot { return (*emptySnapshot)(nil) }
// StandardCounter is the standard implementation of a Counter and uses the
// sync/atomic package to manage a single int64 value.
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
type StandardCounter atomic.Int64
// Clear sets the counter to zero.
func (c *StandardCounter) Clear() {
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
(*atomic.Int64)(c).Store(0)
}
// Dec decrements the counter by the given amount.
func (c *StandardCounter) Dec(i int64) {
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
(*atomic.Int64)(c).Add(-i)
}
// Inc increments the counter by the given amount.
func (c *StandardCounter) Inc(i int64) {
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
(*atomic.Int64)(c).Add(i)
}
// Snapshot returns a read-only copy of the counter.
metrics: refactor metrics (#28035) This change includes a lot of things, listed below. ### Split up interfaces, write vs read The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_. Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part: ```golang type MeterSnapshot interface { Count() int64 Rate1() float64 Rate5() float64 Rate15() float64 RateMean() float64 } // Meters count events to produce exponentially-weighted moving average rates // at one-, five-, and fifteen-minutes and a mean rate. type Meter interface { Mark(int64) Snapshot() MeterSnapshot Stop() } ``` ### A note about concurrency This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it. - For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe. - All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe. TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe. For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots. Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`. Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it: ```golang ms := metric.Snapshot() ... fields := map[string]interface{}{ "count": ms.Count(), "max": ms.Max(), "mean": ms.Mean(), "min": ms.Min(), "stddev": ms.StdDev(), "variance": ms.Variance(), ``` TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are). ### Sample changes I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once. The same thing has been done for runtimehistogram. ### ResettingTimer API Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`. 1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`. 2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`. This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type. The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead. ### Unexport types A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
1 year ago
func (c *StandardCounter) Snapshot() CounterSnapshot {
return counterSnapshot((*atomic.Int64)(c).Load())
}