Here we add some more changes for live tracing API v1.1:
- Hook `OnSystemCallStartV2` was introduced with `VMContext` as parameter.
- Hook `OnBlockHashRead` was introduced.
- `GetCodeHash` was added to the state interface
- The new `WrapWithJournal` construction helps with tracking EVM reverts in the tracer.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Replaces #29297, descendant from #27535
---------
This PR removes `locals` as a concept from transaction pools. Therefore,
the pool now acts as very a good simulation/approximation of how our
peers' pools behave. What this PR does instead, is implement a
locals-tracker, which basically is a little thing which, from time to
time, asks the pool "did you forget this transaction?". If it did, the
tracker resubmits it.
If the txpool _had_ forgotten it, chances are that the peers had also
forgotten it. It will be propagated again.
Doing this change means that we can simplify the pool internals, quite a
lot.
### The semantics of `local`
Historically, there has been two features, or usecases, that has been
combined into the concept of `locals`.
1. "I want my local node to remember this transaction indefinitely, and
resubmit to the network occasionally"
2. "I want this (valid) transaction included to be top-prio for my
miner"
This PR splits these features up, let's call it `1: local` and `2:
prio`. The `prio` is not actually individual transaction, but rather a
set of `address`es to prioritize.
The attribute `local` means it will be tracked, and `prio` means it will
be prioritized by miner.
For `local`: anything transaction received via the RPC is marked as
`local`, and tracked by the tracker.
For `prio`: any transactions from this sender is included first, when
building a block. The existing commandline-flag `--txpool.locals` sets
the set of `prio` addresses.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR builds on #29040 and updates it to the new version of the spec.
I filled the EEST tests and they pass.
Link to spec: https://eips.ethereum.org/EIPS/eip-7623
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
Co-authored-by: lightclient <lightclient@protonmail.com>
This pull request delivers the new version of the state history, where
the raw storage key is used instead of the hash.
Before the cancun fork, it's supported by protocol to destruct a
specific account and therefore, all the storage slot owned by it should
be wiped in the same transition.
Technically, storage wiping should be performed through storage
iteration, and only the storage key hash will be available for traversal
if the state snapshot is not available. Therefore, the storage key hash
is chosen as the identifier in the old version state history.
Fortunately, account self-destruction has been deprecated by the
protocol since the Cancun fork, and there are no empty accounts eligible
for deletion under EIP-158. Therefore, we can conclude that no storage
wiping should occur after the Cancun fork. In this case, it makes no
sense to keep using hash.
Besides, another big reason for making this change is the current format
state history is unusable if verkle is activated. Verkle tree has a
different key derivation scheme (merkle uses keccak256), the preimage of
key hash must be provided in order to make verkle rollback functional.
This pull request is a prerequisite for landing verkle.
Additionally, the raw storage key is more human-friendly for those who
want to manually check the history, even though Solidity already
performs some hashing to derive the storage location.
---
This pull request doesn't bump the database version, as I believe the
database should still be compatible if users degrade from the new geth
version to old one, the only side effect is the persistent new version
state history will be unusable.
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
This changes the SenderCacher so its goroutines will only be started on first use.
Avoids starting them when package core is just imported but core.BlockChain isn't used.
- it was failing because the maximum data length (previously `dataSize`)
was set to `txMaxSize - 213` but should had been `txMaxSize - 103` and
the last call `dataSize+1+uint64(rand.Intn(10*txMaxSize)))` would
sometimes fail depending on rand.Intn.
- Maximal transaction data size comment (invalid) replaced by code logic
to find the maximum tx length without its data length
- comments and variable naming improved for clarity
- 3rd pool add test replaced to add just 1 above the maximum length,
which is important to ensure the logic is correct
This PR upgrades `golangci-lint` to v1.63.4 and fixes a warn message
which is reported by v1.63.4:
```text
WARN [config_reader] The configuration option `run.skip-dirs-use-default` is deprecated, please use `issues.exclude-dirs-use-default`.
```
Also fixes 2 warnings which are reported by v1.63.4:
```text
core/txpool/blobpool/blobpool.go:1754:12: S1005: unnecessary assignment to the blank identifier (gosimple)
for acct, _ := range p.index {
^
core/txpool/legacypool/legacypool.go:1989:19: S1005: unnecessary assignment to the blank identifier (gosimple)
for localSender, _ := range pool.locals.accounts {
^
```
This PR implements EIP-7702: "Set EOA account code".
Specification: https://eips.ethereum.org/EIPS/eip-7702
> Add a new transaction type that adds a list of `[chain_id, address,
nonce, y_parity, r, s]` authorization tuples. For each tuple, write a
delegation designator `(0xef0100 ++ address)` to the signing account’s
code. All code reading operations must load the code pointed to by the
designator.
---------
Co-authored-by: Mario Vega <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR modifies how the metrics library handles `Enabled`: previously,
the package `init` decided whether to serve real metrics or just
dummy-types.
This has several drawbacks:
- During pkg init, we need to determine whether metrics are enabled or
not. So we first hacked in a check if certain geth-specific
commandline-flags were enabled. Then we added a similar check for
geth-env-vars. Then we almost added a very elaborate check for
toml-config-file, plus toml parsing.
- Using "real" types and dummy types interchangeably means that
everything is hidden behind interfaces. This has a performance penalty,
and also it just adds a lot of code.
This PR removes the interface stuff, uses concrete types, and allows for
the setting of Enabled to happen later. It is still assumed that
`metrics.Enable()` is invoked early on.
The somewhat 'heavy' operations, such as ticking meters and exp-decay,
now checks the enable-flag to prevent resource leak.
The change may be large, but it's mostly pretty trivial, and from the
last time I gutted the metrics, I ensured that we have fairly good test
coverage.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds an API method `DropTransactions` to legacy pool, blob pool and
txpool interface. This method removes all txs currently tracked in the
pools.
It modifies the simulated beacon to use the new method in `Rollback`
which removes previous hacky implementation that also erroneously reset
the gas tip to 1 gwei.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR fixes some issues with benchmarks
- [x] Removes log output from a log-test
- [x] Avoids a `nil`-defer in `triedb/pathdb`
- [x] Fixes some crashes re tracers
- [x] Refactors a very resource-expensive benchmark for blobpol.
**NOTE**: this rewrite touches live production code (a little bit), as
it makes the validator-function used by the blobpool configurable.
- [x] Switch some benches over to use pebble over leveldb
- [x] reduce mem overhead in the setup-phase of some tests
- [x] Marks some tests with a long setup-phase to be skipped if `-short`
is specified (where long is on the order of tens of seconds). Ideally,
in my opinion, one should be able to run with `-benchtime 10ms -short`
and sanity-check all tests very quickly.
- [x] Drops some metrics-bechmark which times the speed of `copy`.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
A couple of tests set the debug level to `TRACE` on stdout,
and all subsequent tests in the same package are also affected
by that, resulting in outputs of tens of megabytes.
This PR removes such calls from two packages where it was prevalent.
This makes getting a summary of failing tests simpler, and possibly
reduces some strain from the CI pipeline.
Reverts ethereum/go-ethereum#30495
You are free to create a proper Clear method if that's the best way. But
one that does a proper cleanup, not some hacky call to set gas which
screws up logs, metrics and everything along the way. Also doesn't work
for legacy pool local transactions.
The current code had a hack in the simulated code, now we have a hack in
live txpooling code. No, that's not acceptable. I want the live code to
be proper, meaningful API, meaningful comments, meaningful
implementation.
Here we move the method that drops all transactions by temporarily increasing the fee
into the TxPool itself. It's better to have it there because we can set it back to the
configured value afterwards. This resolves a TODO in the simulated backend.
This pull request introduces a state.Reader interface for state
accessing.
The interface could be implemented in various ways. It can be pure trie
only reader, or the combination of trie and state snapshot. What's more,
this interface allows us to have more flexibility in the future, e.g.
the
archive reader (for accessing archive state).
Additionally, this pull request removes the following metrics
- `chain/snapshot/account/reads`
- `chain/snapshot/storage/reads`
The address recover is executed and cached in ValidateTransaction already. It's
expected that the cached one is returned in ValidateTransaction. However,
currently, we use the wrong function signer.Sender instead of types.Sender which
will do all the address recover again.
This does not change the behavior here as the nonce in the argument is
tx.Nonce(). This commit helps to make the function easier to read and avoid
capturing the tx in the function.
* .golangci.yml: enable check for consistent receiver name
* beacon/light/sync: fix receiver name
* core/txpool/blobpool: fix receiver name
* core/types: fix receiver name
* internal/ethapi: use consistent receiver name 'api' for handler object
* signer/core/apitypes: fix receiver name
* signer/core: use consistent receiver name 'api' for handler object
* log: fix receiver name
* all: refactor so NewBlock(..) and WithBody(..) take a types.Body
* core: fixup comments, remove txs != receipts panic
* core/types: add empty withdrawls to body if len == 0
Here we add a Go API for running tracing plugins within the main block import process.
As an advanced user of geth, you can now create a Go file in eth/tracers/live/, and within
that file register your custom tracer implementation. Then recompile geth and select your tracer
on the command line. Hooks defined in the tracer will run whenever a block is processed.
The hook system is defined in package core/tracing. It uses a struct with callbacks, instead of
requiring an interface, for several reasons:
- We plan to keep this API stable long-term. The core/tracing hook API does not depend on
on deep geth internals.
- There are a lot of hooks, and tracers will only need some of them. Using a struct allows you
to implement only the hooks you want to actually use.
All existing tracers in eth/tracers/native have been rewritten to use the new hook system.
This change breaks compatibility with the vm.EVMLogger interface that we used to have.
If you are a user of vm.EVMLogger, please migrate to core/tracing, and sorry for breaking
your stuff. But we just couldn't have both the old and new tracing APIs coexist in the EVM.
---------
Co-authored-by: Matthieu Vachon <matthieu.o.vachon@gmail.com>
Co-authored-by: Delweng <delweng@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
Felix Lange
Sina M
Marius van der Wijden
Martin HS
lightclient
jwasinger
rjl493456442
georgehao
Quentin McGaw
Daniel Liu
steven
piersy
Péter Szilágyi
minh-bq
maskpp
Zoo
psogv0308
Aaron Chen
miles
Lee Bousfield
yzb