This change makes the legacy transaction pool use of `uint256.Int` instead of `big.Int`. The changes are made primarily only on the internal functions of legacypool.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth, miner: fix enforcing the minimum miner tip
* ethclient/simulated: fix failing test due the min tip change
* accounts/abi/bind: fix simulater gas tip issue
* eth/downloader: fix skeleton cleanup
* eth/downloader: short circuit if nothing to delete
* eth/downloader: polish the logic in cleanup
* eth/downloader: address comments
At some point, `ForkchoiceUpdatedV2` stopped working for `PayloadAttributesV1` while `paris` was active. This was causing a few failures in hive. This PR fixes that, and also adds a gate in `ForkchoiceUpdatedV1` to disallow `PayloadAttributesV3`.
GetPayloadVX should only return payloads which match its version. GetPayloadV2 is a special snowflake that supports v1 and v2 payloads. This change uses a a version-specific prefix within in the payload id, basically a namespace for the version number.
This PR fixes an issues in the new simulated backend. The root cause is the fact that the transaction pool has an internal reset operation that runs on a background thread.
When a new transaction is added to the pool via the RPC, the transaction is added to a non-executable queue and will be moved to its final location on a background thread. If the machine is overloaded (or simply due to timing issues), it can happen that the simulated backend will try to produce the next block, whilst the pool has not yet marked the newly added transaction executable. This will cause the block to not contain the transaction. This is an issue because we want determinism from the simulator: add a tx, mine a block. It should be in there.
The PR fixes it by adding a Sync function to the txpool, which waits for the current reset operation (if any) to finish, and then runs an entire round of reset on top. The new round is needed because resets are only triggered by new head events, so newly added transactions will not trigger the outer resets that we can wait on. The transaction pool would eventually internally do a reset even on transaction addition, but there's no easy way to wait on that and there's no meaningful reason to bubble that across everything. A clean outer reset will at worse be a small noop goroutine.
This PR introduces a few changes with respect to payload verification in fcu and new payload requests:
* First of all, it undoes the `verifyPayloadAttributes(..)` simplification I attempted in #27872.
* Adds timestamp validation to fcu payload attributes [as required](https://github.com/ethereum/execution-apis/blob/main/src/engine/cancun.md#specification-1) (section 2) by the Engine API spec.
* For the new payload methods, I also update the verification of the executable data. For `newPayloadV2`, it does not currently ensure that cancun values are `nil`. Which could make it possible to submit cancun payloads through it.
* On `newPayloadV3` the same types of checks are added. All shanghai and cancun related fields in the executable data must be non-nil, with the addition that the timestamp is _only_ with cancun.
* Finally it updates a newly failing catalyst test to call the correct fcu and new payload methods depending on the fork.
This change makes use of uin256 to represent balance in state. It touches primarily upon statedb, stateobject and state processing, trying to avoid changes in transaction pools, core types, rpc and tracers.
This change simplifies the logic for indexing transactions and enhances the UX when transaction is not found by returning more information to users.
Transaction indexing is now considered as a part of the initial sync, and `eth.syncing` will thus be `true` if transaction indexing is not yet finished. API consumers can use the syncing status to determine if the node is ready to serve users.
The code to compute a versioned hash was duplicated a couple times, and also had a small
issue: if we ever change params.BlobTxHashVersion, it will most likely also cause changes
to the actual hash computation. So it's a bit useless to have this constant in params.
In the tracing tests, the base fee was generally set to nil. This commit changes this to pass the proper base instead, and fixes the few tests which become broken by the change.
This is a rewrite of the 'simulated backend', an implementation of the ethclient interfaces
which is backed by a simulated blockchain. It was getting annoying to maintain the old
version of the simulated backend feature because there was a lot of code duplication with
the main client.
The new version is built using parts that we already have: an in-memory geth node instance
running in developer mode provides the chain, while the Go API is provided by ethclient.
A backwards-compatibility wrapper is provided, but the simulated backend has also moved to
a more sensible import path: github.com/ethereum/go-ethereum/ethclient/simulated
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR replaces Geth's logger package (a fork of [log15](https://github.com/inconshreveable/log15)) with an implementation using slog, a logging library included as part of the Go standard library as of Go1.21.
Main changes are as follows:
* removes any log handlers that were unused in the Geth codebase.
* Json, logfmt, and terminal formatters are now slog handlers.
* Verbosity level constants are changed to match slog constant values. Internal translation is done to make this opaque to the user and backwards compatible with existing `--verbosity` and `--vmodule` options.
* `--log.backtraceat` and `--log.debug` are removed.
The external-facing API is largely the same as the existing Geth logger. Logger method signatures remain unchanged.
A small semantic difference is that a `Handler` can only be set once per `Logger` and not changed dynamically. This just means that a new logger must be instantiated every time the handler of the root logger is changed.
----
For users of the `go-ethereum/log` module. If you were using this module for your own project, you will need to change the initialization. If you previously did
```golang
log.Root().SetHandler(log.LvlFilterHandler(log.LvlInfo, log.StreamHandler(os.Stderr, log.TerminalFormat(true))))
```
You now instead need to do
```golang
log.SetDefault(log.NewLogger(log.NewTerminalHandlerWithLevel(os.Stderr, log.LevelInfo, true)))
```
See more about reasoning here: https://github.com/ethereum/go-ethereum/issues/28558#issuecomment-1820606613
* eth/gasestimator: early exit for plain transfer and error allowance
* core, eth/gasestimator: hard guess at a possible required gas
* internal/ethapi: update estimation tests with the error ratio
* eth/gasestimator: I hate you linter
* graphql: fix gas estimation test
---------
Co-authored-by: Oren <orenyomtov@users.noreply.github.com>
This change fixes two type-inconsistencies in the JS tracer:
- In most places we return byte arrays as a `Uint8Array` to the tracer. However it seems we missed doing the conversion for `ctx` fields which are passed to the tracer during `result`. They are passed as simple arrays. I think Uint8Arrays are more suitable and we should change this inconsistency. Note: this will be a breaking-change. But I believe the effect is small. If we look at our tracers we see that these fields (`ctx.from`, `ctx.to`, etc.) are used in 2 ways. Passed to `toHex` which takes both array or buffer. Or the length was measured which is the same for both types.
- The `slice` taking in `int, int` params versus `memory.slice` taking `int64, int64` params. I suggest changing `slice` types to `int64`. This should have no effect almost in any case.
There were several problems related to dumping state.
- If a preimage was missing, even if we had set the `OnlyWithAddresses` to `false`, to export them anyway, the way the mapping was constructed (using `common.Address` as key) made the entries get lost anyway. Concerns both state- and blockchain tests.
- Blockchain test execution was not configured to store preimages.
This changes makes it so that the block test executor takes a callback, just like the state test executor already does. This callback can be used to examine the post-execution state, e.g. to aid debugging of test failures.
* cmd, les, tests: remove light client code
This commit removes the light client (LES) code.
Since the merge the light client has been broken and
it is hard to maintain it alongside the normal client.
We decided it would be best to remove it for now and
maybe rework and reintroduce it in the future.
* cmd, eth: remove some more mentions of light mode
* cmd: re-add flags and mark as deprecated
* cmd: warn the user about deprecated flags
* eth: better error message
geth --dev can be used with an existing data directory and genesis block. Since
dev mode only works with PoS, we need to verify that the merge has happened.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR moves our fuzzers from tests/fuzzers into whatever their respective 'native' package is.
The historical reason why they were placed in an external location, is that when they were based on go-fuzz, they could not be "hidden" via the _test.go prefix. So in order to shove them away from the go-ethereum "production code", they were put aside.
But now we've rewritten them to be based on golang testing, and thus can be brought back. I've left (in tests/) the ones that are not production (bls128381), require non-standard imports (secp requires btcec, bn256 requires gnark/google/cloudflare deps).
This PR also adds a fuzzer for precompiled contracts, because why not.
This PR utilizes a newly rewritten replacement for go-118-fuzz-build, namely gofuzz-shim, which utilises the inputs from the fuzzing engine better.
Currently, geth's will return `[]` for any `len(topics) > 4` log filter. The EVM only supports up to four logs, via LOG4 opcode, so larger criterias fail. This change makes the filter query exit early in those cases.
Currently, one can use the "withLogs" parameter to include logs in the
callTracer results, which allows the user to see at which trace level
was each log emitted.
This commit adds a position field to the logs which determine
the exact ordering of a call's logs and its subcalls. This would
be useful e.g. for explorers wishing to display the flow of execution.
Co-authored-by: jsvisa <delweng@gmail.com>
This change improves GenerateChain to support internal chain history access (ChainReader)
for the consensus engine and EVM.
GenerateChain takes a `parent` block and the number of blocks to create. With my changes,
the consensus engine and EVM can now access blocks from `parent` up to the block currently
being generated. This is required to make the BLOCKHASH instruction work, and also needed
to create real clique chains. Clique uses chain history to figure out if the current signer is in-turn,
for example.
I've also added some more accessors to BlockGen. These are helpful when creating transactions:
- g.Signer returns a signer instance for the current block
- g.Difficulty returns the current block difficulty
- g.Gas returns the remaining gas amount
Another fix in this commit concerns the receipts returned by GenerateChain. The receipts now
have properly derived fields (BlockHash, etc.) and should generally match what would be
returned by the RPC API.
Péter Szilágyi
Sina Mahmoodi
Marius van der Wijden
lightclient
Martin HS
rjl493456442
Ng Wei Han
Felix Lange
Dimitris Apostolou
Darioush Jalali
Paul Lange
牛晓婕
HAOYUatHZ
ucwong
alex
Ursulafe
Ford
Manav Darji
Delweng
jwasinger
Alvaro Sevilla