496 Commits (0f77f34bb67b640bd8af22b215f3d279a1e21170)

Author	SHA1	Message	Date
Felix Lange	c14de2e973	p2p/nat: tweak port mapping log messages and levels ... People stil get confused about the messages. This commit changes the levels so that the only thing printed at the default level (info) is a successful mapping.	9 years ago
Felix Lange	663d4e0aff	p2p/nat: add test for UPnP auto discovery via SSDP ... The test listens for multicast UDP packets on the default interface because I couldn't get it to work reliably on loopback without massive changes to goupnp. This means that the test might fail when there is a UPnP-enabled router attached on that interface. I checked that locally by looping the test and it passes reliably because the local SSDP server always responds faster.	9 years ago
Felix Lange	983f5a717a	p2p/nat: fix concurrent access to autodisc Interface ... Concurrent calls to Interface methods on autodisc could return a "not discovered" error if the discovery did not finish before the call. autodisc.wait expected the done channel to carry the found Interface but it was closed instead. The fix is to use sync.Once for now, which is easier to get right. And there is a test. Finally. This will have to change again when we introduce re-discovery.	9 years ago
Felix Lange	7efeb4bd96	p2p: bump maxAcceptConns and defaultDialTimout ... On the test network, we've seen that it becomes harder to connect if the queues are so short.	9 years ago
Felix Lange	251846d65a	p2p/discover: fix out-of-bounds slicing for chunked neighbors packets ... The code assumed that Table.closest always returns at least 13 nodes. This is not true for small tables (e.g. during bootstrap).	10 years ago
subtly	8eef2b765a	fix test.	10 years ago
subtly	a32693770c	Manual send of multiple neighbours packets. Test receiving multiple neighbours packets.	10 years ago
subtly	7473c93668	UDP Interop. Limit datagrams to 1280bytes. ... We don't have a UDP which specifies any messages that will be 4KB. Aside from being implemented for months and a necessity for encryption and piggy-backing packets, 1280bytes is ideal, and, means this TODO can be completed! Why 1280 bytes? * It's less than the default MTU for most WAN/LAN networks. That means fewer fragmented datagrams (esp on well-connected networks). * Fragmented datagrams and dropped packets suck and add latency while OS waits for a dropped fragment to never arrive (blocking readLoop()) * Most of our packets are < 1280 bytes. * 1280 bytes is minimum datagram size and MTU for IPv6 -- on IPv6, a datagram < 1280bytes will *never* be fragmented. UDP datagrams are dropped. A lot! And fragmented datagrams are worse. If a datagram has a 30% chance of being dropped, then a fragmented datagram has a 60% chance of being dropped. More importantly, we have signed packets and can't do anything with a packet unless we receive the entire datagram because the signature can't be verified. The same is true when we have encrypted packets. So the solution here to picking an ideal buffer size for receiving datagrams is a number under 1400bytes. And the lower-bound value for IPv6 of 1280 bytes make's it a non-decision. On IPv4 most ISPs and 3g/4g/let networks have an MTU just over 1400 -- and *never* over 1500. Never -- that means packets over 1500 (in reality: ~1450) bytes are fragmented. And probably dropped a lot. Just to prove the point, here are pings sending non-fragmented packets over wifi/ISP, and a second set of pings via cell-phone tethering. It's important to note that, if *any* router between my system and the EC2 node has a lower MTU, the message would not go through: On wifi w/normal ISP: localhost:Debug $ ping -D -s 1450 52.6.250.242 PING 52.6.250.242 (52.6.250.242): 1450 data bytes 1458 bytes from 52.6.250.242: icmp_seq=0 ttl=42 time=104.831 ms 1458 bytes from 52.6.250.242: icmp_seq=1 ttl=42 time=119.004 ms ^C --- 52.6.250.242 ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 104.831/111.918/119.004/7.087 ms localhost:Debug $ ping -D -s 1480 52.6.250.242 PING 52.6.250.242 (52.6.250.242): 1480 data bytes ping: sendto: Message too long ping: sendto: Message too long Request timeout for icmp_seq 0 ping: sendto: Message too long Request timeout for icmp_seq 1 Tethering to O2: localhost:Debug $ ping -D -s 1480 52.6.250.242 PING 52.6.250.242 (52.6.250.242): 1480 data bytes ping: sendto: Message too long ping: sendto: Message too long Request timeout for icmp_seq 0 ^C --- 52.6.250.242 ping statistics --- 2 packets transmitted, 0 packets received, 100.0% packet loss localhost:Debug $ ping -D -s 1450 52.6.250.242 PING 52.6.250.242 (52.6.250.242): 1450 data bytes 1458 bytes from 52.6.250.242: icmp_seq=0 ttl=42 time=107.844 ms 1458 bytes from 52.6.250.242: icmp_seq=1 ttl=42 time=105.127 ms 1458 bytes from 52.6.250.242: icmp_seq=2 ttl=42 time=120.483 ms 1458 bytes from 52.6.250.242: icmp_seq=3 ttl=42 time=102.136 ms	10 years ago
Bas van Kervel	95773b9673	removed redundant newlines in import block	10 years ago
Bas van Kervel	b79dd188d9	replaced several path.* with filepath.* which is platform independent	10 years ago
Felix Lange	d4f0a67323	p2p: drop connections with no matching protocols	10 years ago
Felix Lange	9c0f36c46d	p2p: use maxDialingConns instead of maxAcceptConns as dial limit	10 years ago
Felix Lange	914e57e49b	p2p: fix disconnect at capacity ... With the introduction of static/trusted nodes, the peer count can go above MaxPeers. Update the capacity check to handle this. While here, decouple the trusted nodes check from the handshake by passing a function instead.	10 years ago
Péter Szilágyi	8735e5addd	p2p: increase the handshake timeout in the tests	10 years ago
Péter Szilágyi	4d5a719f25	cmd, eth, p2p: introduce pending peer cli arg, add tests	10 years ago
Péter Szilágyi	af93217775	p2p: reduce the concurrent handshakes to 10/10 in/out	10 years ago
Péter Szilágyi	2060bc8bac	p2p: fix dial throttling race condition	10 years ago
Péter Szilágyi	29fef349ef	p2p: fix a dialing race in the throttler	10 years ago
Péter Szilágyi	3953bf0031	p2p: limit the outbound dialing too	10 years ago
Felix Lange	3e2a928caa	p2p: stop dialing at half the maximum peer count	10 years ago
Felix Lange	6a2fec5309	p2p, whisper: use glog for peer-level logging	10 years ago
Felix Lange	bcfd788661	p2p/discover: bump packet timeouts to 500ms	10 years ago
Felix Lange	fd4b75cfa8	p2p/nat: less confusing error logging	10 years ago
Felix Lange	2adcc31bb4	p2p/discover: new distance metric based on sha3(id) ... The previous metric was pubkey1^pubkey2, as specified in the Kademlia paper. We missed that EC public keys are not uniformly distributed. Using the hash of the public keys addresses that. It also makes it a bit harder to generate node IDs that are close to a particular node.	10 years ago
Péter Szilágyi	4accc187d5	eth, p2p: add trusted node list beside static list	10 years ago
Péter Szilágyi	54db54931e	p2p: add static node dialing test	10 years ago
Péter Szilágyi	e82ddd9198	p2p: correct a leftover trusted -> static	10 years ago
Péter Szilágyi	413ace37d3	eth, p2p: rename trusted nodes to static, drop inbound extra slots	10 years ago
Péter Szilágyi	701591b403	cmd, eth, p2p: fix review issues enumerated by Felix	10 years ago
Péter Szilágyi	1528dbc171	p2p: add trust check to handshake, test privileged connectivity ... Conflicts: p2p/server_test.go	10 years ago
Péter Szilágyi	14f32a0c3a	p2p: reduce the severity of a debug log	10 years ago
Péter Szilágyi	de0549fabb	cmd/geth, cmd/mist, cmd/utils, eth, p2p: support trusted peers	10 years ago
Felix Lange	72ab6d3255	p2p/discover: track sha3(ID) in Node	10 years ago
Felix Lange	b34a8ef624	p2p, p2p/discover: protocol version 4	10 years ago
Felix Lange	fc747ef4a6	p2p/discover: new endpoint format ... This commit changes the discovery protocol to use the new "v4" endpoint format, which allows for separate UDP and TCP ports and makes it possible to discover the UDP address after NAT.	10 years ago
obscuren	01e3d694a6	p2p: added received at to peer message ... p2p.Msg.ReceivedAt can be used for determining block propagation from begining to end.	10 years ago
Péter Szilágyi	b569550a39	p2p/discover: fix api issues caused by leveldb update	10 years ago
Péter Szilágyi	4992765032	p2p/discover: fix goroutine leak due to blocking on sync.Once	10 years ago
Péter Szilágyi	437cf4b3ac	p2p/discover: add node expirer and related tests	10 years ago
Péter Szilágyi	a136e2bb22	p2p/discover: parametrize nodedb version, add persistency tests	10 years ago
Péter Szilágyi	75fd738dea	p2p/discover: drop a superfluous warning	10 years ago
Péter Szilágyi	706da56f75	p2p/discover: wrap the pinger to update the node db too	10 years ago
Péter Szilágyi	85b4b44235	p2p/discover: use iterator based seeding, drop old protocol test	10 years ago
Péter Szilágyi	8de8f61d36	p2p/discover: write the basic tests, catch RLP bug	10 years ago
Péter Szilágyi	0201c04b95	p2p/discovery: fix issues raised in the nodeDb PR	10 years ago
Péter Szilágyi	8646365b42	cmd/bootnode, eth, p2p, p2p/discover: use a fancier db design	10 years ago
Péter Szilágyi	6def110c37	cmd/bootnode, eth, p2p, p2p/discover: clean up the seeder and mesh into eth.	10 years ago
Péter Szilágyi	971702e7a1	p2p/discovery: fix broken tests due to API update	10 years ago
Péter Szilágyi	af923c965f	p2p/discovery: use the seed table for finding nodes, auto drop stale ones	10 years ago
Péter Szilágyi	5f735d6fce	cmd, eth, p2p, p2p/discover: init and clean up the seed cache	10 years ago