* ethclient/gethclient: improve time-sensitive flaky test
* eth/catalyst: fix (?) flaky test
* core: stop blockchains in tests after use
* core: fix dangling blockchain instances
* core: rm whitespace
* eth/gasprice, eth/tracers, consensus/clique: stop dangling blockchains in tests
* all: address review concerns
* core: goimports
* eth/catalyst: fix another time-sensitive test
* consensus/clique: add snapshot test run function
* core: rename stop() to stopWithoutSaving()
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR reworks tx indexer a bit. Compared to the original version, one scenario is no longer handled - upgrading from legacy geth without indexer support.
The tx indexer was introduced in 2020 and have been present through hardforks, so it can be assumed that all Geth nodes have tx indexer already. So we can simplify the tx indexer logic a bit:
- If the tail flag is not present, it means node is just initialized may or may not with an ancient store attached. In this case all blocks are regarded as unindexed
- If the tail flag is present, it means blocks below tail are unindexed, blocks above tail are indexed
This change also address some weird cornercases that could make the indexer not work after a crash.
This PR cleans up the configurations for pruner and snapshotter by passing a config struct.
And also, this PR disables the snapshot background generation if the chain is opened in "read-only" mode. The read-only mode is necessary in some cases. For example, we have a list of commands to open the etheruem node in "read-only" mode, like export-chain. In these cases, the snapshot background generation is non expected and should be banned explicitly.
This shortens the chain config summary in bad block reports,
and adds go-ethereum version information as well.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR makes the event-sending for deleted and new logs happen in batches, to prevent OOM situation due to large reorgs.
Co-authored-by: Felix Lange <fjl@twurst.com>
* core, trie: flush preimages to db on database close
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* rename Close to CommitPreimages for clarity
* core, trie: nitpick fixes
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core: use TryGetAccount to read where TryUpdateAccount has been used to write
* Gary's review feedback
* implement Gary's suggestion
* fix bug + rename NewSecure into NewStateTrie
* trie: add backwards-compatibility aliases for SecureTrie
* Update database.go
* make the linter happy
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* Remove locking in (*BlockChain).ExportN
Since ExportN is read-only, it shouldn't need the lock. (?)
* Add hash check to detect reorgs during export.
* fix check order
* Update blockchain.go
* Update blockchain.go
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* core: recover the state in SetChainHead if the head state is missing
* core: disable test logging
* core: address comment from martin
* core: improve log level in case state is recovered
* core, eth, les, light: rename SetChainHead to SetCanonical
* eth/downloader: implement beacon sync
* eth/downloader: fix a crash if the beacon chain is reduced in length
* eth/downloader: fix beacon sync start/stop thrashing data race
* eth/downloader: use a non-nil pivot even in degenerate sync requests
* eth/downloader: don't touch internal state on beacon Head retrieval
* eth/downloader: fix spelling mistakes
* eth/downloader: fix some typos
* eth: integrate legacy/beacon sync switchover and UX
* eth: handle UX wise being stuck on post-merge TTD
* core, eth: integrate the beacon client with the beacon sync
* eth/catalyst: make some warning messages nicer
* eth/downloader: remove Ethereum 1&2 notions in favor of merge
* core/beacon, eth: clean up engine API returns a bit
* eth/downloader: add skeleton extension tests
* eth/catalyst: keep non-kiln spec, handle mining on ttd
* eth/downloader: add beacon header retrieval tests
* eth: fixed spelling, commented failing tests out
* eth/downloader: review fixes
* eth/downloader: drop peers failing to deliver beacon headers
* core/rawdb: track beacon sync data in db inspect
* eth: fix review concerns
* internal/web3ext: nit
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* core/rawdb, cmd, ethdb, eth: implement freezer tail deletion
* core/rawdb: address comments from martin and sina
* core/rawdb: fixes cornercase in tail deletion
* core/rawdb: separate metadata into a standalone file
* core/rawdb: remove unused code
* core/rawdb: add random test
* core/rawdb: polish code
* core/rawdb: fsync meta file before manipulating the index
* core/rawdb: fix typo
* core/rawdb: address comments
This PR fixes a special corner case in transaction indexing.
When the chain is rewound by SetHead to a historical point which is even lower than the transaction indexes tail, then system will report Failed to decode block body error all the time, because the relevant blocks are already deleted.
In order to avoid this "non-critical-but-annoying" issue, we can recap the indexing target to head+1(to is excluded, so it means indexing transactions from 0 to head).
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
It is because write known block only checks block and state without snapshot, which could lead to gap between newest snapshot and newest block state. However, new blocks which would cause snapshot to become fixed were ignored, since state was already known.
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This removes some code:
- The clique engine calculated the snapshot twice when verifying headers/blocks.
- The method GetBlockHashesFromHash in Header/Block/Lightchain was only used by tests. It
is now removed from the API.
- The method GetTdByHash internally looked up the number before calling GetTd(hash, num).
In many cases, callers already had the number, and used this method just because it has a
shorter name. I have removed the method to make the API surface smaller.
This change removes misuses of sync.WaitGroup in BlockChain. Before this change,
block insertion modified the WaitGroup counter in order to ensure that Stop would wait
for pending operations to complete. This was racy and could even lead to crashes
if Stop was called at an unfortunate time. The issue is resolved by adding a specialized
'closable' mutex, which prevents chain modifications after stopping while also
synchronizing writers with each other.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change is a rewrite of the freezer code.
When writing ancient chain data to the freezer, the previous version first encoded each
individual item to a temporary buffer, then wrote the buffer. For small item sizes (for
example, in the block hash freezer table), this strategy causes a lot of system calls for
writing tiny chunks of data. It also allocated a lot of temporary []byte buffers.
In the new version, we instead encode multiple items into a re-useable batch buffer, which
is then written to the file all at once. This avoids performing a system call for every
inserted item.
To make the internal batching work, the ancient database API had to be changed. While
integrating this new API in BlockChain.InsertReceiptChain, additional optimizations were
also added there.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change adds the --catalyst flag, enabling an RPC API for eth2 integration.
In this initial version, catalyst mode also disables all peer-to-peer networking.
Co-authored-by: Mikhail Kalinin <noblesse.knight@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* all: add thousandths separators for big numbers on log messages
* p2p/sentry: drop accidental file
* common, log: add fast number formatter
* common, eth/protocols/snap: simplifty fancy num types
* log: handle nil big ints
Martin Holst Swende
rjl493456442
Felix Lange
lightclient
Justin Traglia
Guillaume Ballet
Marius van der Wijden
henridf
Seungbae.yu
milesvant
Péter Szilágyi
Sam
Ziyuan Zhong(仲梓源)
Sina Mahmoodi
baptiste-b-pegasys
aaronbuchwald