10 Commits (60c062e17df7cac4addbec1a216daedf83af876e)

Author	SHA1	Message	Date
lash	2f5b6cb442	swarm/network: Use different privatekey for bzz overlay in sim (#19313) ... * cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter * cmd/p2p/swarm: Remove comments + config.Enode nomarshal * p2p/simulations: Remove superfluous error check * p2p/simulation: Move init enode comment * swarm, p2p/simulations, cmd/swarm: Use nodekey in binary record sign * swarm/network, swarm/pss: Dervice bzzkey * swarm/pss: Remove unused function * swarm/network: Store swarm private key in simulation bucket * swarm/pss: Shorten TextProxNetwork shortrunning test timeout * swarm/pss: Increase prox test timeout * swarm/pss: Increase timeout slightly on shortrunning proxtest * swarm/network: Simplify bucket instantiation in servicectx func * p2p/simulations: Tcpport -> udpport * swarm/network, swarm/pss: Simplify + correct lock in servicefunc sim * swarm/network: Cleanup after rebase on extract swarm enode new * p2p/simulations, swarm/network: Make exec disc test pass * swarm/network: Prune ye olde comment * swarm/pss: Correct revised bzzkey method call * swarm/network: Clarify comment about privatekey generation data * swarm/pss: Fix syntax errors after rebase * swarm/network: Rename misleadingly named method (amend commit to trigger ci - attempt 5)	6 years ago
lash	09924cbcaa	cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter (#19309) ... * cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter * cmd/p2p/swarm: Remove comments + config.Enode nomarshal * p2p/simulations: Remove superfluous error check * p2p/simulation: Move init enode comment * swarm/api: Check error in config test * swarm, p2p/simulations, cmd/swarm: Use nodekey in binary record sign * cmd/swarm: Make nodekey available for swarm api config	6 years ago
Felföldi Zsolt	c2003ed63b	les, les/flowcontrol: improved request serving and flow control (#18230) ... This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.	6 years ago
Ferenc Szabo	fe03b76ffe	A few minor code inspection fixes (#18393) ... * swarm/network: fix code inspection problems - typos - redundant import alias * p2p/simulations: fix code inspection problems - typos - unused function parameters - redundant import alias - code style issue: snake case * swarm/network: fix unused method parameters inspections	6 years ago
Felix Lange	dcae0d348b	p2p/simulations: fix a deadlock and clean up adapters (#17891) ... This fixes a rare deadlock with the inproc adapter: - A node is stopped, which acquires Network.lock. - The protocol code being simulated (swarm/network in my case) waits for its goroutines to shut down. - One of those goroutines calls into the simulation to add a peer, which waits for Network.lock. The fix for the deadlock is really simple, just release the lock before stopping the simulation node. Other changes in this PR clean up the exec adapter so it reports node startup errors better and remove the docker adapter because it just adds overhead. In the exec adapter, node information is now posted to a one-shot server. This avoids log parsing and allows reporting startup errors to the simulation host. A small change in package node was needed because simulation nodes use port zero. Node.{HTTP,WS}Endpoint now return the live endpoints after startup by checking the TCP listener.	6 years ago
Felix Lange	30cd5c1854	all: new p2p node representation (#17643) ... Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.	6 years ago
Elad	1836366ac1	all: library changes for swarm-network-rewrite (#16898) ... This commit adds all changes needed for the merge of swarm-network-rewrite. The changes: - build: increase linter timeout - contracts/ens: export ensNode - log: add Output method and enable fractional seconds in format - metrics: relax test timeout - p2p: reduced some log levels, updates to simulation packages - rpc: increased maxClientSubscriptionBuffer to 20000	7 years ago
Ivan Daniluk	c4a4613d95	p2p/simulations/adapters: fix websocket log line parsing in exec adapter (#16667)	7 years ago
Lewis Marshall	54aeb8e4c0	p2p/simulations: various stability fixes (#15198) ... p2p/simulations: introduce dialBan - Refactor simulations/network connection getters to support avoiding simultaneous dials between two peers If two peers dial simultaneously, the connection will be dropped to help avoid that, we essentially lock the connection object with a timestamp which serves as a ban on dialing for a period of time (dialBanTimeout). - The connection getter InitConn can be wrapped and passed to the nodes via adapters.NodeConfig#Reachable field and then used by the respective services when they initiate connections. This massively stablise the emerging connectivity when running with hundreds of nodes bootstrapping a network. p2p: add Inbound public method to p2p.Peer p2p/simulations: Add server id to logs to support debugging in-memory network simulations when multiple peers are logging. p2p: SetupConn now returns error. The dialer checks the error and only calls resolve if the actual TCP dial fails.	7 years ago
Lewis Marshall	9feec51e2d	p2p: add network simulation framework (#14982) ... This commit introduces a network simulation framework which can be used to run simulated networks of devp2p nodes. The intention is to use this for testing protocols, performing benchmarks and visualising emergent network behaviour.	7 years ago