This PR adds server-side limits for JSON-RPC batch requests. Before this change, batches
were limited only by processing time. The server would pick calls from the batch and
answer them until the response timeout occurred, then stop processing the remaining batch
items.
Here, we are adding two additional limits which can be configured:
- the 'item limit': batches can have at most N items
- the 'response size limit': batches can contain at most X response bytes
These limits are optional in package rpc. In Geth, we set a default limit of 1000 items
and 25MB response size.
When a batch goes over the limit, an error response is returned to the client. However,
doing this correctly isn't always possible. In JSON-RPC, only method calls with a valid
`id` can be responded to. Since batches may also contain non-call messages or
notifications, the best effort thing we can do to report an error with the batch itself is
reporting the limit violation as an error for the first method call in the batch. If a batch is
too large, but contains only notifications and responses, the error will be reported with
a null `id`.
The RPC client was also changed so it can deal with errors resulting from too large
batches. An older client connected to the server code in this PR could get stuck
until the request timeout occurred when the batch is too large. **Upgrading to a version
of the RPC client containing this change is strongly recommended to avoid timeout issues.**
For some weird reason, when writing the original client implementation, @fjl worked off of
the assumption that responses could be distributed across batches arbitrarily. So for a
batch request containing requests `[A B C]`, the server could respond with `[A B C]` but
also with `[A B] [C]` or even `[A] [B] [C]` and it wouldn't make a difference to the
client.
So in the implementation of BatchCallContext, the client waited for all requests in the
batch individually. If the server didn't respond to some of the requests in the batch, the
client would eventually just time out (if a context was used).
With the addition of batch limits into the server, we anticipate that people will hit this
kind of error way more often. To handle this properly, the client now waits for a single
response batch and expects it to contain all responses to the requests.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Here we add special handling for sending an error response when the write timeout of the
HTTP server is just about to expire. This is surprisingly difficult to get right, since is
must be ensured that all output is fully flushed in time, which needs support from
multiple levels of the RPC handler stack:
The timeout response can't use chunked transfer-encoding because there is no way to write
the final terminating chunk. net/http writes it when the topmost handler returns, but the
timeout will already be over by the time that happens. We decided to disable chunked
encoding by setting content-length explicitly.
Gzip compression must also be disabled for timeout responses because we don't know the
true content-length before compressing all output, i.e. compression would reintroduce
chunked transfer-encoding.
This adds a way to specify HTTP headers per request.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a generic mechanism for 'dial options' in the RPC client,
and also implements a specific dial option for the JWT authentication
mechanism used by the engine API. Some real tests for the server-side
authentication handling are also added.
Co-authored-by: Joshua Gutow <jgutow@optimism.io>
Co-authored-by: Felix Lange <fjl@twurst.com>
This change makes http.Server.ReadHeaderTimeout configurable separately
from ReadTimeout for RPC servers. The default is set to the same as
ReadTimeout, which in order to cause no change in existing deployments.
When talking to an HTTP2 server, there are situations where it needs to
"rewind" the Request.Body. To allow this, we have to set up the Request.GetBody
function to return a brand new instance of the body.
If not set, we can end up with the following error:
http2: Transport: cannot retry err [http2: Transport received Server's graceful shutdown GOAWAY] after Request.Body was written; define Request.GetBody to avoid this error
See this commit for more information: cffdcf672a?visible=2
This replaces the sketchy and undocumented string context keys for HTTP requests
with a defined interface. Using string keys with context is discouraged because
they may clash with keys created by other packages.
We added these keys to make connection metadata available in the signer, so this
change also updates signer/core to use the new PeerInfo API.
The new error type is returned by client operations contains details of
the response error code and response body.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change makes it possible to run geth with JSON-RPC over HTTP and
WebSocket on the same TCP port. The default port for WebSocket
is still 8546.
geth --rpc --rpcport 8545 --ws --wsport 8545
This also removes a lot of deprecated API surface from package rpc.
The rpc package is now purely about serving JSON-RPC and no longer
provides a way to start an HTTP server.
* rpc: improve codec abstraction
rpc.ServerCodec is an opaque interface. There was only one way to get a
codec using existing APIs: rpc.NewJSONCodec. This change exports
newCodec (as NewFuncCodec) and NewJSONCodec (as NewCodec). It also makes
all codec methods non-public to avoid showing internals in godoc.
While here, remove codec options in tests because they are not
supported anymore.
* p2p/simulations: use github.com/gorilla/websocket
This package was the last remaining user of golang.org/x/net/websocket.
Migrating to the new library wasn't straightforward because it is no
longer possible to treat WebSocket connections as a net.Conn.
* vendor: delete golang.org/x/net/websocket
* rpc: fix godoc comments and run gofmt
This change adds support for gzip encoding on HTTP responses.
Gzip encoding is used when the client sets the 'accept-encoding: gzip' header.
Original change by @brianosaurus, with fixes from @SjonHortensius.
* rpc: implement websockets with github.com/gorilla/websocket
This change makes package rpc use the github.com/gorilla/websocket
package for WebSockets instead of golang.org/x/net/websocket. The new
library is more robust and supports all WebSocket features including
continuation frames.
There are new tests for two issues with the previously-used library:
- TestWebsocketClientPing checks handling of Ping frames.
- TestWebsocketLargeCall checks whether the request size limit is
applied correctly.
* rpc: raise HTTP/WebSocket request size limit to 5MB
* rpc: remove default origin for client connections
The client used to put the local hostname into the Origin header because
the server wanted an origin to accept the connection, but that's silly:
Origin is for browsers/websites. The nobody would whitelist a particular
hostname.
Now that the server doesn't need Origin anymore, don't bother setting
one for clients. Users who need an origin can use DialWebsocket to
create a client with arbitrary origin if needed.
* vendor: put golang.org/x/net/websocket back
* rpc: don't set Origin header for empty (default) origin
* rpc: add HTTP status code to handshake error
This makes it easier to debug failing connections.
* ethstats: use github.com/gorilla/websocket
* rpc: fix lint
New APIs added:
client.RegisterName(namespace, service) // makes service available to server
client.Notify(ctx, method, args...) // sends a notification
ClientFromContext(ctx) // to get a client in handler method
This is essentially a rewrite of the server-side code. JSON-RPC
processing code is now the same on both server and client side. Many
minor issues were fixed in the process and there is a new test suite for
JSON-RPC spec compliance (and non-compliance in some cases).
List of behavior changes:
- Method handlers are now called with a per-request context instead of a
per-connection context. The context is canceled right after the method
returns.
- Subscription error channels are always closed when the connection
ends. There is no need to also wait on the Notifier's Closed channel
to detect whether the subscription has ended.
- Client now omits "params" instead of sending "params": null when there
are no arguments to a call. The previous behavior was not compliant
with the spec. The server still accepts "params": null.
- Floating point numbers are allowed as "id". The spec doesn't allow
them, but we handle request "id" as json.RawMessage and guarantee that
the same number will be sent back.
- Logging is improved significantly. There is now a message at DEBUG
level for each RPC call served.
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
* signer: remove local path disclosure from extapi
* signer: show more data in cli ui
* rpc: make http server forward UA and Origin via Context
* signer, clef/core: ui changes + display UA and Origin
* signer: cliui - indicate less trust in remote headers, see https://github.com/ethereum/go-ethereum/issues/17637
* signer: prevent possibility swap KV-entries in aes_gcm storage, fixes#17635
* signer: remove ecrecover from external API
* signer,clef: default reject instead of warn + valideate new passwords. fixes#17632 and #17631
* signer: check calldata length even if no ABI signature is present
* signer: fix failing testcase
* clef: remove account import from external api
* signer: allow space in passwords, improve error messsage
* signer/storage: fix typos
* rpc: Make HTTP server timeout values configurable
* rpc: Remove flags for setting HTTP Timeouts, configuring via .toml is sufficient.
* rpc: Replace separate constants with a single default struct.
* rpc: Update HTTP Server Read and Write Timeouts to 30s.
* rpc: Remove redundant NewDefaultHTTPTimeouts function.
* rpc: document HTTPTimeouts.
* rpc: sanitize timeout values for library use
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* rpc: Support specifying HTTP client in RPC dialing
Adds a minimal interface that captures http.Client and adds a new method
rpc.DialHTTPClient that takes a client using that interface. The existing
rpc.DialHTTP method is then alternatively implemented by using the new
rpc.DialHTTPClient method provided with a standard *http.Client.
* rpc: fix minor doc typos
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
There is no need to depend on the old context package now that the
minimum Go version is 1.7. The move to "context" eliminates our weird
vendoring setup. Some vendored code still uses golang.org/x/net/context
and it is now vendored in the normal way.
This change triggered new vet checks around context.WithTimeout which
didn't fire with golang.org/x/net/context.
mmsqe
Shude Li
lightclient
Sina Mahmoodi
storyicon
Jordan Krage
protolambda
Tristan-Wilson
Håvard Anda Estensen
Valentin Trinqué
Felix Lange
ryanc414
rene
Steven E. Harris
SjonHortensius
Felix Lange
Kris Shinn
Martin Holst Swende
HackyMiner
Ryan Schneider
kiel barry
Péter Szilágyi
Steven Roose
Sorin Neacsu
Vitaly V
Armani Ferrante
bas-vk
bloonfield
Bas van Kervel
Micah Zoltu
Kenji Siu
Jonathan Brown