`flatCallTracer` will now specify the type of a create in the action
via the `creationMethod` field.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR fixes some issues with benchmarks
- [x] Removes log output from a log-test
- [x] Avoids a `nil`-defer in `triedb/pathdb`
- [x] Fixes some crashes re tracers
- [x] Refactors a very resource-expensive benchmark for blobpol.
**NOTE**: this rewrite touches live production code (a little bit), as
it makes the validator-function used by the blobpool configurable.
- [x] Switch some benches over to use pebble over leveldb
- [x] reduce mem overhead in the setup-phase of some tests
- [x] Marks some tests with a long setup-phase to be skipped if `-short`
is specified (where long is on the order of tens of seconds). Ideally,
in my opinion, one should be able to run with `-benchtime 10ms -short`
and sanity-check all tests very quickly.
- [x] Drops some metrics-bechmark which times the speed of `copy`.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This test depends on a 100ms timer, which fails quite often, messing up
our pipelines. Hook directly into the internal version of getPayload
which has the capacity to wait for the full payload before returning.
This might not be absolutely correct from a test perspective, but it
beats failing ci. The alternative would be to expose the full build hook
into the outside, but it might be a bit overkill for this scenario.
When using the prestateTracer, in some cases users are only concerned
with balances or nonce information, and are not interested in the lengthy
contract code or storage data.
Therefore, this PR introduces two new configuration options in the
`prestateTracerConfig` structure:
- `disableCode`
- `disableStorage`
These options allow users to control whether the tracer returns contract
code and storage data during execution tracing. By setting these
options, users can more flexibly customize their needs and focus on
obtaining information that is more critical and relevant to their
specific use cases.
These options work with the default mode as well as `diffMode: true`.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Sina M <1591639+s1na@users.noreply.github.com>
rebased https://github.com/ethereum/go-ethereum/pull/29766 . The
downstream branch appears to have been deleted and I don't have perms to
push to that fork.
`TerminalTotalDifficultyPassed` is removed. `TerminalTotalDifficulty`
must now be non-nil, and it is expected that networks are already
merged: we can only import PoW/Clique chains, not produce blocks on
them.
---------
Co-authored-by: stevemilk <wangpeculiar@gmail.com>
This PR moves the logging/tracing-facilities out of `*state.StateDB`,
in to a wrapping struct which implements `vm.StateDB` instead.
In most places, it is a pretty straight-forward change:
- First, hoisting the invocations from state objects up to the statedb.
- Then making the mutation-methods simply return the previous value, so
that the external logging layer could log everything.
Some internal code uses the direct object-accessors to mutate the state,
particularly in testing and in setting up state overrides, which means
that these changes are unobservable for the hooked layer. Thus, configuring
the overrides are not necessarily part of the API we want to publish.
The trickiest part about the layering is that when the selfdestructs are
finally deleted during `Finalise`, there's the possibility that someone
sent some ether to it, which is burnt at that point, and thus needs to
be logged. The hooked layer reaches into the inner layer to figure out
these events.
In package `vm`, the conversion from `state.StateDB + hooks` into a
hooked `vm.StateDB` is performed where needed.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
While looking at some mem profiles from `evm` runs, I noticed that
`goja` compilation of the bigint library was present. The bigint library
compilation happens in a package `init`, whenever the package
`eth/tracers/js` is loaded. This PR changes it to load lazily when
needed.
It becomes slightly faster with this change, and slightly less alloc:y.
Non-scientific benchmark with 100 executions:
```
time for i in {1..100}; do ./evm --code 6040 run; done;
```
current `master`:
```
real 0m6.634s
user 0m5.213s
sys 0m2.277s
```
Without compiling bigint
```
real 0m5.802s
user 0m4.191s
sys 0m1.965s
```
Breaking changes:
- The ChainConfig was exposed to tracers via VMContext passed in
`OnTxStart`. This is unnecessary specially looking through the lens of
live tracers as chain config remains the same throughout the lifetime of
the program. It was there so that native API-invoked tracers could
access it. So instead we moved it to the constructor of API tracers.
Non-breaking:
- Change the default config of the tracers to be `{}` instead of nil.
This way an extra nil check can be avoided.
Refactoring:
- Rename `supply` struct to `supplyTracer`.
- Un-export some hook definitions.
This change brings geth into compliance with the current engine API
specification for the Prague fork. I have moved the assignment of
ExecutionPayloadEnvelope.Requests into BlockToExecutableData to ensure
there is a single place where the type is removed.
While doing so, I noticed that handling of requests in the miner was not
quite correct for the empty payload. It would return `nil` requests for
the empty payload even for blocks after the Prague fork. To fix this, I
have added the emptyRequests field in miner.Payload.
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This is a redo of #29052 based on newer specs. Here we implement EIPs
scheduled for the Prague fork:
- EIP-7002: Execution layer triggerable withdrawals
- EIP-7251: Increase the MAX_EFFECTIVE_BALANCE
Co-authored-by: lightclient <lightclient@protonmail.com>
A couple of tests set the debug level to `TRACE` on stdout,
and all subsequent tests in the same package are also affected
by that, resulting in outputs of tens of megabytes.
This PR removes such calls from two packages where it was prevalent.
This makes getting a summary of failing tests simpler, and possibly
reduces some strain from the CI pipeline.
This implements recent changes to EIP-7685, EIP-6110, and
execution-apis.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Shude Li <islishude@gmail.com>
Reverts ethereum/go-ethereum#30495
You are free to create a proper Clear method if that's the best way. But
one that does a proper cleanup, not some hacky call to set gas which
screws up logs, metrics and everything along the way. Also doesn't work
for legacy pool local transactions.
The current code had a hack in the simulated code, now we have a hack in
live txpooling code. No, that's not acceptable. I want the live code to
be proper, meaningful API, meaningful comments, meaningful
implementation.
Here we move the method that drops all transactions by temporarily increasing the fee
into the TxPool itself. It's better to have it there because we can set it back to the
configured value afterwards. This resolves a TODO in the simulated backend.
This PR integrates witness-enabled block production, witness-creating
payload execution and stateless cross-validation into the `engine` API.
The purpose of the PR is to enable the following use-cases (for API
details, please see next section):
- Cross validating locally created blocks:
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Cross validating locally processed blocks:
- Call `newPayloadWithWitness` instead of `newPayload` to trigger
witness creation too.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Block production for stateless clients (local or MEV builders):
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Propagate witnesses across the consensus libp2p network for stateless
Ethereum.
- Stateless validator validation:
- Call `executeStatelessPayload` with the propagated witness to
statelessly validate the block.
*Note, the various `WithWitness` methods could also *just be* an
additional boolean flag on the base methods, but this PR wanted to keep
the methods separate until a final consensus is reached on how to
integrate in production.*
---
The following `engine` API types are introduced:
```go
// StatelessPayloadStatusV1 is the result of a stateless payload execution.
type StatelessPayloadStatusV1 struct {
Status string `json:"status"`
StateRoot common.Hash `json:"stateRoot"`
ReceiptsRoot common.Hash `json:"receiptsRoot"`
ValidationError *string `json:"validationError"`
}
```
- Add `forkchoiceUpdatedWithWitnessV1,2,3` with same params and returns
as `forkchoiceUpdatedV1,2,3`, but triggering a stateless witness
building if block production is requested.
- Extend `getPayloadV2,3` to return `executionPayloadEnvelope` with an
additional `witness` field of type `bytes` iff created via
`forkchoiceUpdatedWithWitnessV2,3`.
- Add `newPayloadWithWitnessV1,2,3,4` with same params and returns as
`newPayloadV1,2,3,4`, but triggering a stateless witness creation during
payload execution to allow cross validating it.
- Extend `payloadStatusV1` with a `witness` field of type `bytes` if
returned by `newPayloadWithWitnessV1,2,3,4`.
- Add `executeStatelessPayloadV1,2,3,4` with same base params as
`newPayloadV1,2,3,4` and one more additional param (`witness`) of type
`bytes`. The method returns `statelessPayloadStatusV1`, which mirrors
`payloadStatusV1` but replaces `latestValidHash` with `stateRoot` and
`receiptRoot`.
h/t @MariusVanDerWijden for finding and fixing this on devnet 3.
I made the mistake of thinking `PayloadVersion` was correlated with the
`GetPayloadVX` method, but it actually tracks which version of
`PayloadAttributes` were passed to `forkchoiceUpdated`. So far, Prague
does not necessitate a new version of fcu, so there is no need for
`PayloadV4`.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This PR fixes an issue with blob transaction propagation due to the blob
transation txpool rejecting transactions with gapped nonces. The
specific changes are:
- fetch transactions from a peer in the order they were announced to
minimize nonce-gaps (which cause blob txs to be rejected
- don't wait on fetching blob transactions after announcement is
received, since they are not broadcast
Testing:
- unit tests updated to reflect that fetch order should always match tx
announcement order
- unit test added to confirm blob transactions are scheduled immediately
for fetching
- running the PR on an eth mainnet full node without incident so far
---------
Signed-off-by: Roberto Bayardo <bayardo@alum.mit.edu>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This is a successor PR to #25743. This PR is based on a new iteration of
the spec: https://github.com/ethereum/execution-apis/pull/484.
`eth_multicall` takes in a list of blocks, each optionally overriding
fields like number, timestamp, etc. of a base block. Each block can
include calls. At each block users can override the state. There are
extra features, such as:
- Include ether transfers as part of the logs
- Overriding precompile codes with evm bytecode
- Redirecting accounts to another address
## Breaking changes
This PR includes the following breaking changes:
- Block override fields of eth_call and debug_traceCall have had the
following fields renamed
- `coinbase` -> `feeRecipient`
- `random` -> `prevRandao`
- `baseFee` -> `baseFeePerGas`
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This pull request introduces a state.Reader interface for state
accessing.
The interface could be implemented in various ways. It can be pure trie
only reader, or the combination of trie and state snapshot. What's more,
this interface allows us to have more flexibility in the future, e.g.
the
archive reader (for accessing archive state).
Additionally, this pull request removes the following metrics
- `chain/snapshot/account/reads`
- `chain/snapshot/storage/reads`
This PR changes how sidechains are handled.
Before the merge, it was possible to import a chain with lower td and not set it as canonical. After the merge, we expect every chain that we get via InsertChain to be canonical. Non-canonical blocks can still be inserted
with InsertBlockWIthoutSetHead.
If during the InsertChain, the existing chain is not canonical anymore, we mark it as a sidechain and send the SideChainEvents normally.
Make tracers more robust by handling `nil` receipt as input.
Also pass in a receipt with gas used in the state test runner.
Closes https://github.com/ethereum/go-ethereum/issues/30117.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
closes#29475, replaces #29657, #30104
Fixes two issues. First is a deadlock where the txpool attempts to reorg, but can't complete because there are no readers left for the new txs subscription. Second, resolves a problem with on demand mode where txs may be left pending when there are more pending txs than block space.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Here I am adding a discv5 nodes source into the p2p dial iterator. It's
an improved version of #29533.
Unlike discv4, the discv5 random nodes iterator will always provide full
ENRs. This means we can apply filtering to the results and will only try
dialing nodes which explictly opt into the eth protocol with a matching
chain.
I have also removed the dial iterator from snap. We don't have an
official DNS list for snap anymore, and I doubt anyone else is running
one. While we could potentially filter for snap on discv5, there will be
very few nodes announcing it, and the extra iterator would just stall
the dialer.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Add coinbase address to javascript tracer context.
This PR adds the `coinbase` address to `jsTracer.ctx`, allowing access
to the coinbase address (fee receipient) in custom JavaScript tracers.
Example usage:
```javascript
result: function(ctx) {
return toAddress(ctx.coinbase);
}
```
This change enables custom tracers to access coinbase address,
previously unavailable, enhancing their capabilities to match built-in
tracers.
This pull request drops the legacy transaction retrieval support from before
eth68, adding the restrictions that transaction metadata must be provided
along with the transaction announment.
This pull request fixes#30229.
During snap sync, large storage will be split into several pieces and
synchronized concurrently. Unfortunately, the tradeoff is that the respective
merkle trie of each storage chunk will be incomplete due to the incomplete
boundaries. The trie nodes on these boundaries will be discarded, and any
dangling nodes on disk will also be removed if they fall on these paths,
ensuring the state healer won't be blocked.
However, the dangling account trie nodes on the path from the root to the
associated account are left untouched. This means the dangling account trie
nodes could potentially stop the state healing and break the assumption that the
entire subtrie should exist if the subtrie root exists. We should consider the
account trie node as the ancestor of the corresponding storage trie node.
In the scenarios described in the above ticket, the state corruption could occur
if there is a dangling account trie node while some storage trie nodes are
removed due to synchronization redo.
The fixing idea is pretty straightforward, the trie nodes on the path from root
to account should all be explicitly removed if an incomplete storage trie
occurs. Therefore, a `delete` operation has been added into `gentrie` to
explicitly clear the account along with all nodes on this path. The special
thing is that it's a cross-trie clearing. In theory, there may be a dangling
node at any position on this account key and we have to clear all of them.
Fixes a slight miscalculation in the downloader queue, which was not accurately taking block withdrawals into account when calculating the size of the items in the queue
Marius van der Wijden
Delweng
Martin HS
Péter Szilágyi
Shude Li
jwasinger
rjl493456442
lightclient
Sina M
Felix Lange
easyfold
Darioush Jalali
Roberto Bayardo
Karl Bartel
stevemilk
Dylan Vassallo
psogv0308