11 Commits (876f3573647f9a62d94073b342bc678f380f0304)

Author	SHA1	Message	Date
gluk256	8d04154691	p2p/simulations: wait until all connections are recreated when uploading snapshot (#19312) ... * swarm/network/simulation: test cases refactored * swarm/pss: minor refactoring * swarm/simulation: UploadSnapshot updated * swarm/network: style fix * swarm/pss: bugfix	6 years ago
lash	09924cbcaa	cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter (#19309) ... * cmd/swarm, p2p, swarm: Enable ENR in binary/execadapter * cmd/p2p/swarm: Remove comments + config.Enode nomarshal * p2p/simulations: Remove superfluous error check * p2p/simulation: Move init enode comment * swarm/api: Check error in config test * swarm, p2p/simulations, cmd/swarm: Use nodekey in binary record sign * cmd/swarm: Make nodekey available for swarm api config	6 years ago
lash	4b4f03ca37	swarm, p2p: Prerequities for ENR replacing handshake (#19275) ... * swarm/api, swarm/network, p2p/simulations: Prerequisites for handshake remove * swarm, p2p: Add full sim node configs for protocoltester * swarm/network: Make stream package pass tests * swarm/network: Extract peer and addr types out of protocol file * p2p, swarm: Make p2p/protocols tests pass + rename types.go * swarm/network: Deactivate ExecAdapter test until binary ENR prep * swarm/api: Remove comments * swarm/network: Uncomment bootnode record load	6 years ago
Janoš Guljaš	872370e3bc	swarm/network/simulation: do not copy node mutex in UploadSnapshot (#19160)	6 years ago
Ferenc Szabo	50b872bf05	p2p, swarm: fix node up races by granular locking (#18976) ... * swarm/network: DRY out repeated giga comment I not necessarily agree with the way we wait for event propagation. But I truly disagree with having duplicated giga comments. * p2p/simulations: encapsulate Node.Up field so we avoid data races The Node.Up field was accessed concurrently without "proper" locking. There was a lock on Network and that was used sometimes to access the field. Other times the locking was missed and we had a data race. For example: https://github.com/ethereum/go-ethereum/pull/18464 The case above was solved, but there were still intermittent/hard to reproduce races. So let's solve the issue permanently. resolves: ethersphere/go-ethereum#1146 * p2p/simulations: fix unmarshal of simulations.Node Making Node.Up field private in 13292ee897 broke TestHTTPNetwork and TestHTTPSnapshot. Because the default UnmarshalJSON does not handle unexported fields. Important: The fix is partial and not proper to my taste. But I cut scope as I think the fix may require a change to the current serialization format. New ticket: https://github.com/ethersphere/go-ethereum/issues/1177 * p2p/simulations: Add a sanity test case for Node.Config UnmarshalJSON * p2p/simulations: revert back to defer Unlock() pattern for Network It's a good patten to call `defer Unlock()` right after `Lock()` so (new) error cases won't miss to unlock. Let's get back to that pattern. The patten was abandoned in 85a79b3ad3, while fixing a data race. That data race does not exist anymore, since the Node.Up field got hidden behind its own lock. * p2p/simulations: consistent naming for test providers Node.UnmarshalJSON * p2p/simulations: remove JSON annotation from private fields of Node As unexported fields are not serialized. * p2p/simulations: fix deadlock in Network.GetRandomDownNode() Problem: GetRandomDownNode() locks -> getDownNodeIDs() -> GetNodes() tries to lock -> deadlock On Network type, unexported functions must assume that `net.lock` is already acquired and should not call exported functions which might try to lock again. * p2p/simulations: ensure method conformity for Network Connect* methods were moved to p2p/simulations.Network from swarm/network/simulation. However these new methods did not follow the pattern of Network methods, i.e., all exported method locks the whole Network either for read or write. * p2p/simulations: fix deadlock during network shutdown `TestDiscoveryPersistenceSimulationSimAdapter` often got into deadlock. The execution was stuck on two locks, i.e, `Kademlia.lock` and `p2p/simulations.Network.lock`. Usually the test got stuck once in each 20 executions with high confidence. `Kademlia` was stuck in `Kademlia.EachAddr()` and `Network` in `Network.Stop()`. Solution: in `Network.Stop()` `net.lock` must be released before calling `node.Stop()` as stopping a node (somehow - I did not find the exact code path) causes `Network.InitConn()` to be called from `Kademlia.SuggestPeer()` and that blocks on `net.lock`. Related ticket: https://github.com/ethersphere/go-ethereum/issues/1223 * swarm/state: simplify if statement in DBStore.Put() * p2p/simulations: remove faulty godoc from private function The comment started with the wrong method name. The method is simple and self explanatory. Also, it's private. => Let's just remove the comment.	6 years ago
Ferenc Szabo	2eb838ed97	p2p/simulations: eliminate concept of pivot (#18426)	6 years ago
Ferenc Szabo	fe03b76ffe	A few minor code inspection fixes (#18393) ... * swarm/network: fix code inspection problems - typos - redundant import alias * p2p/simulations: fix code inspection problems - typos - unused function parameters - redundant import alias - code style issue: snake case * swarm/network: fix unused method parameters inspections	6 years ago
Elad	472c23a801	p2p/simulation: move connection methods from swarm/network/simulation (#18323)	6 years ago
Felix Lange	30cd5c1854	all: new p2p node representation (#17643) ... Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.	6 years ago
holisticode	d6efa69187	Merge netsim mig to master (#17241) ... * swarm: merged stream-tests migration to develop * swarm/network: expose simulation RandomUpNode to use in stream tests * swarm/network: wait for subs in PeerEvents and fix stream.runSyncTest * swarm: enforce waitkademlia for snapshot tests * swarm: fixed syncer tests and snapshot_sync_test * swarm: linting of simulation package * swarm: address review comments * swarm/network/stream: fix delivery_test bugs and refactor * swarm/network/stream: addressed PR comments @janos * swarm/network/stream: enforce waitKademlia, improve TestIntervals * swarm/network/stream: TestIntervals not waiting for chunk to be stored	6 years ago
Janoš Guljaš	dcaaa3c804	swarm: network simulation for swarm tests (#769) ... * cmd/swarm: minor cli flag text adjustments * cmd/swarm, swarm/storage, swarm: fix mingw on windows test issues * cmd/swarm: support for smoke tests on the production swarm cluster * cmd/swarm/swarm-smoke: simplify cluster logic as per suggestion * changed colour of landing page * landing page reacts to enter keypress * swarm/api/http: sticky footer for swarm landing page using flex * swarm/api/http: sticky footer for error pages and fix for multiple choices * swarm: propagate ctx to internal apis (#754) * swarm/simnet: add basic node/service functions * swarm/netsim: add buckets for global state and kademlia health check * swarm/netsim: Use sync.Map as bucket and provide cleanup function for... * swarm, swarm/netsim: adjust SwarmNetworkTest * swarm/netsim: fix tests * swarm: added visualization option to sim net redesign * swarm/netsim: support multiple services per node * swarm/netsim: remove redundant return statement * swarm/netsim: add comments * swarm: shutdown HTTP in Simulation.Close * swarm: sim HTTP server timeout * swarm/netsim: add more simulation methods and peer events examples * swarm/netsim: add WaitKademlia example * swarm/netsim: fix comments * swarm/netsim: terminate peer events goroutines on simulation done * swarm, swarm/netsim: naming updates * swarm/netsim: return not healthy kademlias on WaitTillHealthy * swarm: fix WaitTillHealthy call in testSwarmNetwork * swarm/netsim: allow bucket to have any type for a key * swarm: Added snapshots to new netsim * swarm/netsim: add more tests for bucket * swarm/netsim: move http related things into separate files * swarm/netsim: add AddNodeWithService option * swarm/netsim: add more tests and Start* methods * swarm/netsim: add peer events and kademlia tests * swarm/netsim: fix some tests flakiness * swarm/netsim: improve random nodes selection, fix TestStartStop* tests * swarm/netsim: remove time measurement from TestClose to avoid flakiness * swarm/netsim: builder pattern for netsim HTTP server (#773) * swarm/netsim: add connect related tests * swarm/netsim: add comment for TestPeerEvents * swarm: rename netsim package to network/simulation	6 years ago