This fixes a deadlock that could occur when a response packet arrived
after a call had already received enough responses and was about to
signal completion to the dispatch loop.
Co-authored-by: Felix Lange <fjl@twurst.com>
For some reason, using the shared hash causes a cryptographic incompatibility
when using Go 1.15. I noticed this during the development of Discovery v5.1
when I added test vector verification.
The go library commit that broke this is golang/go@97240d5, but the
way we used HKDF is slightly dodgy anyway and it's not a regression.
This change improves discovery behavior in small networks. Very small
networks would often fail to bootstrap because all member nodes were
dropping table content due to findnode failure. The check is now changed
to avoid dropping nodes on findnode failure when their bucket is almost
empty. It also relaxes the liveness check requirement for FINDNODE/v4
response nodes, returning unverified nodes as results when there aren't
any verified nodes yet.
The "findnode failed" log now reports whether the node was dropped
instead of the number of results. The value of the "results" was
always zero by definition.
Co-authored-by: Felix Lange <fjl@twurst.com>
* p2p: add low port check in dialer
We already have a check like this for UDP ports, add a similar one in
the dialer. This prevents dials to port zero and it's also an extra
layer of protection against spamming HTTP servers.
* p2p/discover: use errLowPort in v4 code
* p2p: change port check
* p2p: add comment
* p2p/simulations/adapters: ensure assigned port is in all node records
This adds two new methods to UDPv5, AllNodes and LocalNode.
AllNodes returns all the nodes stored in the local table; this is
useful for the purposes of metrics collection and also debugging any
potential issues with other discovery v5 implementations.
LocalNode returns the local node object. The reason for exposing this
is so that users can modify and set/delete new key-value entries in
the local record.
This adds an implementation of the current discovery v5 spec.
There is full integration with cmd/devp2p and enode.Iterator in this
version. In theory we could enable the new protocol as a replacement of
discovery v4 at any time. In practice, there will likely be a few more
changes to the spec and implementation before this can happen.
* p2p/enr: add entries for for IPv4/IPv6 separation
This adds entry types for "ip6", "udp6", "tcp6" keys. The IP type stays
around because removing it would break a lot of code and force everyone
to care about the distinction.
* p2p/enode: track IPv4 and IPv6 address separately
LocalNode predicts the local node's UDP endpoint and updates the record.
This change makes it predict IPv4 and IPv6 endpoints separately since
they can now be in the record at the same time.
* p2p/enode: implement base64 text format
* all: switch to enode.Parse(...)
This allows passing base64-encoded node records to all the places that
previously accepted enode:// URLs. The URL format is still supported.
* cmd/bootnode, p2p: log node URL instead of ENR
...and return the base64 record in NodeInfo.
* p2p/discover: export Ping and RequestENR
These two are useful for checking the status of a node.
* cmd/devp2p: add devp2p debug tool
This is a new tool for debugging p2p issues. It supports a few
basic tasks for now, but many more things can and will be added
in the near future.
devp2p enrdump -- prints ENRs readably
devp2p discv4 ping -- checks if a node is up
devp2p discv4 requestenr -- gets a node's record
devp2p discv4 resolve -- finds a node through the DHT
This change implements EIP-868. The UDPv4 transport announces support
for the extension in ping/pong and handles enrRequest messages.
There are two uses of the extension: If a remote node announces support
for EIP-868 in their pong, node revalidation pulls the node's record.
The Resolve method requests the record unconditionally.
This change restructures the internals of p2p/discover to make room for
the discv5 code which will soon be added to this package.
- packet type names now have a "V4" suffix.
- ListenUDP returns *UDPv4 instead of *Table. This technically breaks
the API but the only caller in go-ethereum is package p2p, which uses
a compatible interface and doesn't need changes.
- The internal transport interface is changed to make Table reusable for v5.
- The 'lookup' code moves from table to transport. This required
updating the lookup unit test to use udpTest instead of a custom transport.
This resolves a minor issue where neighbors responses containing less
than 16 nodes would bump the failure counter, removing the node. One
situation where this can happen is a private deployment where the total
number of extant nodes is less than 16.
Issue found by @jsying.
This change clears up confusion around the two ways in which nodes
can be added to the table.
When a neighbors packet is received as a reply to findnode, the nodes
contained in the reply are added as 'seen' entries if sufficient space
is available.
When a ping is received and the endpoint verification has taken place,
the remote node is added as a 'verified' entry or moved to the front of
the bucket if present. This also updates the node's IP address and port
if they have changed.
This change resolves multiple issues around handling of endpoint proofs.
The proof is now done separately for each IP and completing the proof
requires a matching ping hash.
Also remove waitping because it's equivalent to sleep. waitping was
slightly more efficient, but that may cause issues with findnode if
packets are reordered and the remote end sees findnode before pong.
Logging of received packets was hitherto done after handling the packet,
which meant that sent replies were logged before the packet that
generated them. This change splits up packet handling into 'preverify'
and 'handle'. The error from 'preverify' is logged, but 'handle' happens
after the message is logged. This fixes the order. Packet logs now
contain the node ID.
This PR adds enode.LocalNode and integrates it into the p2p
subsystem. This new object is the keeper of the local node
record. For now, a new version of the record is produced every
time the client restarts. We'll make it smarter to avoid that in
the future.
There are a couple of other changes in this commit: discovery now
waits for all of its goroutines at shutdown and the p2p server
now closes the node database after discovery has shut down. This
fixes a leveldb crash in tests. p2p server startup is faster
because it doesn't need to wait for the external IP query
anymore.
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
* p2p/discover: move bond logic from table to transport
This commit moves node endpoint verification (bonding) from the table to
the UDP transport implementation. Previously, adding a node to the table
entailed pinging the node if needed. With this change, the ping-back
logic is embedded in the packet handler at a lower level.
It is easy to verify that the basic protocol is unchanged: we still
require a valid pong reply from the node before findnode is accepted.
The node database tracked the time of last ping sent to the node and
time of last valid pong received from the node. Node endpoints are
considered verified when a valid pong is received and the time of last
pong was called 'bond time'. The time of last ping sent was unused. In
this commit, the last ping database entry is repurposed to mean last
ping _received_. This entry is now used to track whether the node needs
to be pinged back.
The other big change is how nodes are added to the table. We used to add
nodes in Table.bond, which ran when a remote node pinged us or when we
encountered the node in a neighbors reply. The transport now adds to the
table directly after the endpoint is verified through ping. To ensure
that the Table can't be filled just by pinging the node repeatedly, we
retain the isInitDone check. During init, only nodes from neighbors
replies are added.
* p2p/discover: reduce findnode failure counter on success
* p2p/discover: remove unused parameter of loadSeedNodes
* p2p/discover: improve ping-back check and comments
* p2p/discover: add neighbors reply nodes always, not just during init
This commit adds all changes needed for the merge of swarm-network-rewrite.
The changes:
- build: increase linter timeout
- contracts/ens: export ensNode
- log: add Output method and enable fractional seconds in format
- metrics: relax test timeout
- p2p: reduced some log levels, updates to simulation packages
- rpc: increased maxClientSubscriptionBuffer to 20000
I forgot to change the check in udp.go when I changed Table.bond to be
based on lastPong instead of node presence in db. Rename lastPong to
bondTime and add hasBond so it's clearer what this DB key is used for
now.
* p2p: add DialRatio for configuration of inbound vs. dialed connections
* p2p: add connection flags to PeerInfo
* p2p/netutil: add SameNet, DistinctNetSet
* p2p/discover: improve revalidation and seeding
This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.
Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.
Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.
Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.
* p2p/discover: fix nits in UDP transport
We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
Nishant Das
Felix Lange
Guillaume Ballet
timcooijmans
Nishant Das
Péter Szilágyi
Christian Muehlhaeuser
Martin Holst Swende
Felix Lange
Matthew Halpern
Emil
Oleg Kovalov
Elad
kiel barry
thomasmodeneis
Felföldi Zsolt
ferhat elmas
Lewis Marshall
Ali Hajimirza