Here we move the method that drops all transactions by temporarily increasing the fee
into the TxPool itself. It's better to have it there because we can set it back to the
configured value afterwards. This resolves a TODO in the simulated backend.
This PR integrates witness-enabled block production, witness-creating
payload execution and stateless cross-validation into the `engine` API.
The purpose of the PR is to enable the following use-cases (for API
details, please see next section):
- Cross validating locally created blocks:
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Cross validating locally processed blocks:
- Call `newPayloadWithWitness` instead of `newPayload` to trigger
witness creation too.
- Call `executeStatelessPayload` against another client to
cross-validate the block.
- Block production for stateless clients (local or MEV builders):
- Call `forkchoiceUpdatedWithWitness` instead of `forkchoiceUpdated` to
trigger witness creation too.
- Call `getPayload` as before to retrieve the new block and also the
above created witness.
- Propagate witnesses across the consensus libp2p network for stateless
Ethereum.
- Stateless validator validation:
- Call `executeStatelessPayload` with the propagated witness to
statelessly validate the block.
*Note, the various `WithWitness` methods could also *just be* an
additional boolean flag on the base methods, but this PR wanted to keep
the methods separate until a final consensus is reached on how to
integrate in production.*
---
The following `engine` API types are introduced:
```go
// StatelessPayloadStatusV1 is the result of a stateless payload execution.
type StatelessPayloadStatusV1 struct {
Status string `json:"status"`
StateRoot common.Hash `json:"stateRoot"`
ReceiptsRoot common.Hash `json:"receiptsRoot"`
ValidationError *string `json:"validationError"`
}
```
- Add `forkchoiceUpdatedWithWitnessV1,2,3` with same params and returns
as `forkchoiceUpdatedV1,2,3`, but triggering a stateless witness
building if block production is requested.
- Extend `getPayloadV2,3` to return `executionPayloadEnvelope` with an
additional `witness` field of type `bytes` iff created via
`forkchoiceUpdatedWithWitnessV2,3`.
- Add `newPayloadWithWitnessV1,2,3,4` with same params and returns as
`newPayloadV1,2,3,4`, but triggering a stateless witness creation during
payload execution to allow cross validating it.
- Extend `payloadStatusV1` with a `witness` field of type `bytes` if
returned by `newPayloadWithWitnessV1,2,3,4`.
- Add `executeStatelessPayloadV1,2,3,4` with same base params as
`newPayloadV1,2,3,4` and one more additional param (`witness`) of type
`bytes`. The method returns `statelessPayloadStatusV1`, which mirrors
`payloadStatusV1` but replaces `latestValidHash` with `stateRoot` and
`receiptRoot`.
h/t @MariusVanDerWijden for finding and fixing this on devnet 3.
I made the mistake of thinking `PayloadVersion` was correlated with the
`GetPayloadVX` method, but it actually tracks which version of
`PayloadAttributes` were passed to `forkchoiceUpdated`. So far, Prague
does not necessitate a new version of fcu, so there is no need for
`PayloadV4`.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This PR fixes an issue with blob transaction propagation due to the blob
transation txpool rejecting transactions with gapped nonces. The
specific changes are:
- fetch transactions from a peer in the order they were announced to
minimize nonce-gaps (which cause blob txs to be rejected
- don't wait on fetching blob transactions after announcement is
received, since they are not broadcast
Testing:
- unit tests updated to reflect that fetch order should always match tx
announcement order
- unit test added to confirm blob transactions are scheduled immediately
for fetching
- running the PR on an eth mainnet full node without incident so far
---------
Signed-off-by: Roberto Bayardo <bayardo@alum.mit.edu>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This is a successor PR to #25743. This PR is based on a new iteration of
the spec: https://github.com/ethereum/execution-apis/pull/484.
`eth_multicall` takes in a list of blocks, each optionally overriding
fields like number, timestamp, etc. of a base block. Each block can
include calls. At each block users can override the state. There are
extra features, such as:
- Include ether transfers as part of the logs
- Overriding precompile codes with evm bytecode
- Redirecting accounts to another address
## Breaking changes
This PR includes the following breaking changes:
- Block override fields of eth_call and debug_traceCall have had the
following fields renamed
- `coinbase` -> `feeRecipient`
- `random` -> `prevRandao`
- `baseFee` -> `baseFeePerGas`
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This pull request introduces a state.Reader interface for state
accessing.
The interface could be implemented in various ways. It can be pure trie
only reader, or the combination of trie and state snapshot. What's more,
this interface allows us to have more flexibility in the future, e.g.
the
archive reader (for accessing archive state).
Additionally, this pull request removes the following metrics
- `chain/snapshot/account/reads`
- `chain/snapshot/storage/reads`
This PR changes how sidechains are handled.
Before the merge, it was possible to import a chain with lower td and not set it as canonical. After the merge, we expect every chain that we get via InsertChain to be canonical. Non-canonical blocks can still be inserted
with InsertBlockWIthoutSetHead.
If during the InsertChain, the existing chain is not canonical anymore, we mark it as a sidechain and send the SideChainEvents normally.
Make tracers more robust by handling `nil` receipt as input.
Also pass in a receipt with gas used in the state test runner.
Closes https://github.com/ethereum/go-ethereum/issues/30117.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
closes#29475, replaces #29657, #30104
Fixes two issues. First is a deadlock where the txpool attempts to reorg, but can't complete because there are no readers left for the new txs subscription. Second, resolves a problem with on demand mode where txs may be left pending when there are more pending txs than block space.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Here I am adding a discv5 nodes source into the p2p dial iterator. It's
an improved version of #29533.
Unlike discv4, the discv5 random nodes iterator will always provide full
ENRs. This means we can apply filtering to the results and will only try
dialing nodes which explictly opt into the eth protocol with a matching
chain.
I have also removed the dial iterator from snap. We don't have an
official DNS list for snap anymore, and I doubt anyone else is running
one. While we could potentially filter for snap on discv5, there will be
very few nodes announcing it, and the extra iterator would just stall
the dialer.
---------
Co-authored-by: lightclient <lightclient@protonmail.com>
Add coinbase address to javascript tracer context.
This PR adds the `coinbase` address to `jsTracer.ctx`, allowing access
to the coinbase address (fee receipient) in custom JavaScript tracers.
Example usage:
```javascript
result: function(ctx) {
return toAddress(ctx.coinbase);
}
```
This change enables custom tracers to access coinbase address,
previously unavailable, enhancing their capabilities to match built-in
tracers.
This pull request drops the legacy transaction retrieval support from before
eth68, adding the restrictions that transaction metadata must be provided
along with the transaction announment.
This pull request fixes#30229.
During snap sync, large storage will be split into several pieces and
synchronized concurrently. Unfortunately, the tradeoff is that the respective
merkle trie of each storage chunk will be incomplete due to the incomplete
boundaries. The trie nodes on these boundaries will be discarded, and any
dangling nodes on disk will also be removed if they fall on these paths,
ensuring the state healer won't be blocked.
However, the dangling account trie nodes on the path from the root to the
associated account are left untouched. This means the dangling account trie
nodes could potentially stop the state healing and break the assumption that the
entire subtrie should exist if the subtrie root exists. We should consider the
account trie node as the ancestor of the corresponding storage trie node.
In the scenarios described in the above ticket, the state corruption could occur
if there is a dangling account trie node while some storage trie nodes are
removed due to synchronization redo.
The fixing idea is pretty straightforward, the trie nodes on the path from root
to account should all be explicitly removed if an incomplete storage trie
occurs. Therefore, a `delete` operation has been added into `gentrie` to
explicitly clear the account along with all nodes on this path. The special
thing is that it's a cross-trie clearing. In theory, there may be a dangling
node at any position on this account key and we have to clear all of them.
Fixes a slight miscalculation in the downloader queue, which was not accurately taking block withdrawals into account when calculating the size of the items in the queue
This PR fixes an issue in the setMode method of beaconBackfiller where the
log message was not displaying the previous mode correctly. The log message
now shows both the old and new sync modes.
* avoid unnecessary copy
* delete the never used function ProofList
* eth/protocols/snap, trie/trienode: polish the code
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Introduces the first built-in live tracer. The supply tracer tracks ETH supply changes across blocks
and writes the output to disk. This will need to be enabled through CLI using the `--vmtrace supply` flag.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This should fix an occasional test failure in ethclient/simulated.TestForkResendTx.
Inspection of logs revealed the cause of the failure to be that the txpool was not done
reorganizing by the time Fork is called.
This pull request fixes the flay test TestSkeletonSyncRetrievals. In this test, we first
trigger a sync cycle and wait for it to meet certain expectations. We then inject a new
head and potentially also a new peer, then perform another final sync. The test now
performs the newPeer addition before launching the final sync, and waits a bit for that
peer to get registered. This fixes the logic race that made the test fail sometimes.
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
This fixes an issue for `debug_traceBlock*` methods where the BASEFEE opcode was returning always 0. This caused the method return invalid results.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Péter Szilágyi
jwasinger
Darioush Jalali
lightclient
Roberto Bayardo
Sina M
rjl493456442
Marius van der Wijden
Karl Bartel
Martin HS
stevemilk
Felix Lange
Dylan Vassallo
psogv0308
Delweng
Seungmin Kim
caseylove
Jordan Krage
Aayush Rajasekaran
Halimao
maskpp
ucwong
Hteev Oli
tianyeyouyou
Chris Ziogas
yujinpark
trillo
PolyMa
Mobin Mohanan