rename parameter
In this case, the naming of "extapi" might create some confusion. Although it represents an External Signer Backend, its name could be mistaken for an API. In reality, it is a backend instance used for communicating with external signers. A better naming choice could be "extBackend" or "externalBackend" to more accurately describe that it is a backend instance rather than an API.
Makes the `geth account ... ` commands usable even if a geth-process is already executing, since the account commands do not read the chaindata, it was not required for those to use the same locking mechanism.
---
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
--syncTarget is a feature for development purpose in post-merge world. Previously
it's added into eth.Config. But it turns out that's a stupid idea.
- syncTarget is a block object, which is hard to be put in config file(large)
- syncTarget is just a dev feature, doesn't make too much sense to add it in config file
So I remove it from the eth config object. And it also fixes the #26328
This PR drops the legacy receipt types, the freezer-migrate command and the startup check. The previous attempt #22852 at this failed because there were users who still had legacy receipts in their db, so it had to be reverted #23247. Since then we added a command to migrate legacy dbs #24028.
As of the last hardforks all users either must have done the migration, or used the --ignore-legacy-receipts flag which will stop working now.
This changes the CI build to store the git commit and date into package
internal/version instead of package main. Doing this essentially merges our
two ways of tracking the go-ethereum version into a single place, achieving
two objectives:
- Bad block reports, which use version.Info(), will now have the git commit
information even when geth is built in an environment such as
launchpad.net where git access is unavailable.
- For geth builds created by `go build ./cmd/geth` (i.e. not using `go run
build/ci.go install`), git information stored by the go tool is now used
in the p2p node name as well as in `geth version` and `geth
version-check`.
This adds a cache for block logs which is shared by all filters. The cache
size of is configurable using the `--cache.blocklogs` flag.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change updates our urfave/cli dependency to the v2 branch of the library.
There are some Go API changes in cli v2:
- Flag values can now be accessed using the methods ctx.Bool,
ctx.Int, ctx.String, ... regardless of whether the flag is 'local' or
'global'.
- v2 has built-in support for flag categories. Our home-grown category
system is removed and the categories of flags are assigned as part of
the flag definition.
For users, there is only one observable difference with cli v2: flags must now
strictly appear before regular arguments. For example, the following command is
now invalid:
geth account import mykey.json --password file.txt
Instead, the command must be invoked as follows:
geth account import --password file.txt mykey.json
In #24028 we flagged a warning when finding legacy receipts in the freezer. This PR nudges users a bit more strongly by preventing geth from starting in this case until receipts have been migrated.
It also adds a flag --ignore-legacy-receipts which when present allows geth to start normally.
This PR groups all built-in network flags together and list them in the command as a whole.
And all database path flags(datadir, ancient) are also grouped, since usually these two are
used together.
* cmd/geth: only check for presence of legacy receipts if developer mode is not enabled
* cmd/geth: degrade log level
* cmd/geth: fix format
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* cmd,core: add simple legacy receipt converter
core/rawdb: use forEach in migrate
core/rawdb: batch reads in forEach
core/rawdb: make forEach anonymous fn
cmd/geth: check for legacy receipts on node startup
fix err msg
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
fix log
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
fix some review comments
add warning to cmd
drop isLegacy fn from migrateTable params
add test for windows rename
test replacing in windows case
* minor fix
* sanity check for tail-deletion
* add log before moving files around
* speed-up hack for mainnet
* fix mainnet check, use networkid instead
* check mainnet genesis
* review fixes
* resume previous migration attempt
* core/rawdb: lint fix
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This PR adds flag to enable InfluxDB v2 (--metrics.influxdbv2), flags for v2-specific features (--metrics.influxdb.token, --metrics.influxdb.bucket), also carries over addition of support for specifying organization (--metrics.influxdb.organization), but still retains backwards compatibility with InfluxDB v1.
This change adds the --catalyst flag, enabling an RPC API for eth2 integration.
In this initial version, catalyst mode also disables all peer-to-peer networking.
Co-authored-by: Mikhail Kalinin <noblesse.knight@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This moves the eth config definition into a separate package, eth/ethconfig.
Packages eth and les can now import this common package instead of
importing eth from les, reducing dependencies.
Co-authored-by: Felix Lange <fjl@twurst.com>
* whisper: remove whisper
* Update cmd/geth/config.go
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* cmd/geth: warn on enabling whisper + remove more whisper deps
* mobile: remove all whisper references
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* chaincmd should make config nodes instead of full nodes
* add documentation for using makeConfigNode instead of makeFullNode;
* add documentation to functions
* code style
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
This removes the dashboard project. The dashboard was an experimental
browser UI for geth which displayed metrics and chain information in
real time. We are removing it because it has marginal utility and nobody
on the team can maintain it.
Removing the dashboard removes a lot of dependency code and shaves
6 MB off the geth binary size.
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.
* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
* add-date-to unstable
* fields-insteadof-split
* internal/build: support building with missing git
* docker: add git history back to support commit date in version
* internal/build: use PR commits hashes for PR builds
joohhnnn
Delweng
Péter Szilágyi
Sungwoo Kim
Martin Holst Swende
rjl493456442
Sina Mahmoodi
Felix Lange
willian.eth
Marius van der Wijden
jwasinger
Guillaume Ballet
Alex Prut
Guillaume Ballet
rene
Kurkó Mihály
C. Brown
b00ris