Official Go implementation of the Ethereum protocol
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
go-ethereum/vendor/github.com/btcsuite/btcd/btcec/signature.go

539 lines
16 KiB

// Copyright (c) 2013-2017 The btcsuite developers
// Use of this source code is governed by an ISC
// license that can be found in the LICENSE file.
package btcec
import (
"bytes"
"crypto/ecdsa"
"crypto/elliptic"
"crypto/hmac"
"crypto/sha256"
"errors"
"fmt"
"hash"
"math/big"
)
// Errors returned by canonicalPadding.
var (
errNegativeValue = errors.New("value may be interpreted as negative")
errExcessivelyPaddedValue = errors.New("value is excessively padded")
)
// Signature is a type representing an ecdsa signature.
type Signature struct {
R *big.Int
S *big.Int
}
var (
// Curve order and halforder, used to tame ECDSA malleability (see BIP-0062)
order = new(big.Int).Set(S256().N)
halforder = new(big.Int).Rsh(order, 1)
// Used in RFC6979 implementation when testing the nonce for correctness
one = big.NewInt(1)
// oneInitializer is used to fill a byte slice with byte 0x01. It is provided
// here to avoid the need to create it multiple times.
oneInitializer = []byte{0x01}
)
// Serialize returns the ECDSA signature in the more strict DER format. Note
// that the serialized bytes returned do not include the appended hash type
// used in Bitcoin signature scripts.
//
// encoding/asn1 is broken so we hand roll this output:
//
// 0x30 <length> 0x02 <length r> r 0x02 <length s> s
func (sig *Signature) Serialize() []byte {
// low 'S' malleability breaker
sigS := sig.S
if sigS.Cmp(halforder) == 1 {
sigS = new(big.Int).Sub(order, sigS)
}
// Ensure the encoded bytes for the r and s values are canonical and
// thus suitable for DER encoding.
rb := canonicalizeInt(sig.R)
sb := canonicalizeInt(sigS)
// total length of returned signature is 1 byte for each magic and
// length (6 total), plus lengths of r and s
length := 6 + len(rb) + len(sb)
b := make([]byte, length, length)
b[0] = 0x30
b[1] = byte(length - 2)
b[2] = 0x02
b[3] = byte(len(rb))
offset := copy(b[4:], rb) + 4
b[offset] = 0x02
b[offset+1] = byte(len(sb))
copy(b[offset+2:], sb)
return b
}
// Verify calls ecdsa.Verify to verify the signature of hash using the public
// key. It returns true if the signature is valid, false otherwise.
func (sig *Signature) Verify(hash []byte, pubKey *PublicKey) bool {
return ecdsa.Verify(pubKey.ToECDSA(), hash, sig.R, sig.S)
}
// IsEqual compares this Signature instance to the one passed, returning true
// if both Signatures are equivalent. A signature is equivalent to another, if
// they both have the same scalar value for R and S.
func (sig *Signature) IsEqual(otherSig *Signature) bool {
return sig.R.Cmp(otherSig.R) == 0 &&
sig.S.Cmp(otherSig.S) == 0
}
func parseSig(sigStr []byte, curve elliptic.Curve, der bool) (*Signature, error) {
// Originally this code used encoding/asn1 in order to parse the
// signature, but a number of problems were found with this approach.
// Despite the fact that signatures are stored as DER, the difference
// between go's idea of a bignum (and that they have sign) doesn't agree
// with the openssl one (where they do not). The above is true as of
// Go 1.1. In the end it was simpler to rewrite the code to explicitly
// understand the format which is this:
// 0x30 <length of whole message> <0x02> <length of R> <R> 0x2
// <length of S> <S>.
signature := &Signature{}
// minimal message is when both numbers are 1 bytes. adding up to:
// 0x30 + len + 0x02 + 0x01 + <byte> + 0x2 + 0x01 + <byte>
if len(sigStr) < 8 {
return nil, errors.New("malformed signature: too short")
}
// 0x30
index := 0
if sigStr[index] != 0x30 {
return nil, errors.New("malformed signature: no header magic")
}
index++
// length of remaining message
siglen := sigStr[index]
index++
if int(siglen+2) > len(sigStr) {
return nil, errors.New("malformed signature: bad length")
}
// trim the slice we're working on so we only look at what matters.
sigStr = sigStr[:siglen+2]
// 0x02
if sigStr[index] != 0x02 {
return nil,
errors.New("malformed signature: no 1st int marker")
}
index++
// Length of signature R.
rLen := int(sigStr[index])
// must be positive, must be able to fit in another 0x2, <len> <s>
// hence the -3. We assume that the length must be at least one byte.
index++
if rLen <= 0 || rLen > len(sigStr)-index-3 {
return nil, errors.New("malformed signature: bogus R length")
}
// Then R itself.
rBytes := sigStr[index : index+rLen]
if der {
switch err := canonicalPadding(rBytes); err {
case errNegativeValue:
return nil, errors.New("signature R is negative")
case errExcessivelyPaddedValue:
return nil, errors.New("signature R is excessively padded")
}
}
signature.R = new(big.Int).SetBytes(rBytes)
index += rLen
// 0x02. length already checked in previous if.
if sigStr[index] != 0x02 {
return nil, errors.New("malformed signature: no 2nd int marker")
}
index++
// Length of signature S.
sLen := int(sigStr[index])
index++
// S should be the rest of the string.
if sLen <= 0 || sLen > len(sigStr)-index {
return nil, errors.New("malformed signature: bogus S length")
}
// Then S itself.
sBytes := sigStr[index : index+sLen]
if der {
switch err := canonicalPadding(sBytes); err {
case errNegativeValue:
return nil, errors.New("signature S is negative")
case errExcessivelyPaddedValue:
return nil, errors.New("signature S is excessively padded")
}
}
signature.S = new(big.Int).SetBytes(sBytes)
index += sLen
// sanity check length parsing
if index != len(sigStr) {
return nil, fmt.Errorf("malformed signature: bad final length %v != %v",
index, len(sigStr))
}
// Verify also checks this, but we can be more sure that we parsed
// correctly if we verify here too.
// FWIW the ecdsa spec states that R and S must be | 1, N - 1 |
// but crypto/ecdsa only checks for Sign != 0. Mirror that.
if signature.R.Sign() != 1 {
return nil, errors.New("signature R isn't 1 or more")
}
if signature.S.Sign() != 1 {
return nil, errors.New("signature S isn't 1 or more")
}
if signature.R.Cmp(curve.Params().N) >= 0 {
return nil, errors.New("signature R is >= curve.N")
}
if signature.S.Cmp(curve.Params().N) >= 0 {
return nil, errors.New("signature S is >= curve.N")
}
return signature, nil
}
// ParseSignature parses a signature in BER format for the curve type `curve'
// into a Signature type, perfoming some basic sanity checks. If parsing
// according to the more strict DER format is needed, use ParseDERSignature.
func ParseSignature(sigStr []byte, curve elliptic.Curve) (*Signature, error) {
return parseSig(sigStr, curve, false)
}
// ParseDERSignature parses a signature in DER format for the curve type
// `curve` into a Signature type. If parsing according to the less strict
// BER format is needed, use ParseSignature.
func ParseDERSignature(sigStr []byte, curve elliptic.Curve) (*Signature, error) {
return parseSig(sigStr, curve, true)
}
// canonicalizeInt returns the bytes for the passed big integer adjusted as
// necessary to ensure that a big-endian encoded integer can't possibly be
// misinterpreted as a negative number. This can happen when the most
// significant bit is set, so it is padded by a leading zero byte in this case.
// Also, the returned bytes will have at least a single byte when the passed
// value is 0. This is required for DER encoding.
func canonicalizeInt(val *big.Int) []byte {
b := val.Bytes()
if len(b) == 0 {
b = []byte{0x00}
}
if b[0]&0x80 != 0 {
paddedBytes := make([]byte, len(b)+1)
copy(paddedBytes[1:], b)
b = paddedBytes
}
return b
}
// canonicalPadding checks whether a big-endian encoded integer could
// possibly be misinterpreted as a negative number (even though OpenSSL
// treats all numbers as unsigned), or if there is any unnecessary
// leading zero padding.
func canonicalPadding(b []byte) error {
switch {
case b[0]&0x80 == 0x80:
return errNegativeValue
case len(b) > 1 && b[0] == 0x00 && b[1]&0x80 != 0x80:
return errExcessivelyPaddedValue
default:
return nil
}
}
// hashToInt converts a hash value to an integer. There is some disagreement
// about how this is done. [NSA] suggests that this is done in the obvious
// manner, but [SECG] truncates the hash to the bit-length of the curve order
// first. We follow [SECG] because that's what OpenSSL does. Additionally,
// OpenSSL right shifts excess bits from the number if the hash is too large
// and we mirror that too.
// This is borrowed from crypto/ecdsa.
func hashToInt(hash []byte, c elliptic.Curve) *big.Int {
orderBits := c.Params().N.BitLen()
orderBytes := (orderBits + 7) / 8
if len(hash) > orderBytes {
hash = hash[:orderBytes]
}
ret := new(big.Int).SetBytes(hash)
excess := len(hash)*8 - orderBits
if excess > 0 {
ret.Rsh(ret, uint(excess))
}
return ret
}
// recoverKeyFromSignature recoves a public key from the signature "sig" on the
// given message hash "msg". Based on the algorithm found in section 5.1.5 of
// SEC 1 Ver 2.0, page 47-48 (53 and 54 in the pdf). This performs the details
// in the inner loop in Step 1. The counter provided is actually the j parameter
// of the loop * 2 - on the first iteration of j we do the R case, else the -R
// case in step 1.6. This counter is used in the bitcoin compressed signature
// format and thus we match bitcoind's behaviour here.
func recoverKeyFromSignature(curve *KoblitzCurve, sig *Signature, msg []byte,
iter int, doChecks bool) (*PublicKey, error) {
// 1.1 x = (n * i) + r
Rx := new(big.Int).Mul(curve.Params().N,
new(big.Int).SetInt64(int64(iter/2)))
Rx.Add(Rx, sig.R)
if Rx.Cmp(curve.Params().P) != -1 {
return nil, errors.New("calculated Rx is larger than curve P")
}
// convert 02<Rx> to point R. (step 1.2 and 1.3). If we are on an odd
// iteration then 1.6 will be done with -R, so we calculate the other
// term when uncompressing the point.
Ry, err := decompressPoint(curve, Rx, iter%2 == 1)
if err != nil {
return nil, err
}
// 1.4 Check n*R is point at infinity
if doChecks {
nRx, nRy := curve.ScalarMult(Rx, Ry, curve.Params().N.Bytes())
if nRx.Sign() != 0 || nRy.Sign() != 0 {
return nil, errors.New("n*R does not equal the point at infinity")
}
}
// 1.5 calculate e from message using the same algorithm as ecdsa
// signature calculation.
e := hashToInt(msg, curve)
// Step 1.6.1:
// We calculate the two terms sR and eG separately multiplied by the
// inverse of r (from the signature). We then add them to calculate
// Q = r^-1(sR-eG)
invr := new(big.Int).ModInverse(sig.R, curve.Params().N)
// first term.
invrS := new(big.Int).Mul(invr, sig.S)
invrS.Mod(invrS, curve.Params().N)
sRx, sRy := curve.ScalarMult(Rx, Ry, invrS.Bytes())
// second term.
e.Neg(e)
e.Mod(e, curve.Params().N)
e.Mul(e, invr)
e.Mod(e, curve.Params().N)
minuseGx, minuseGy := curve.ScalarBaseMult(e.Bytes())
// TODO: this would be faster if we did a mult and add in one
// step to prevent the jacobian conversion back and forth.
Qx, Qy := curve.Add(sRx, sRy, minuseGx, minuseGy)
return &PublicKey{
Curve: curve,
X: Qx,
Y: Qy,
}, nil
}
// SignCompact produces a compact signature of the data in hash with the given
// private key on the given koblitz curve. The isCompressed parameter should
// be used to detail if the given signature should reference a compressed
// public key or not. If successful the bytes of the compact signature will be
// returned in the format:
// <(byte of 27+public key solution)+4 if compressed >< padded bytes for signature R><padded bytes for signature S>
// where the R and S parameters are padde up to the bitlengh of the curve.
func SignCompact(curve *KoblitzCurve, key *PrivateKey,
hash []byte, isCompressedKey bool) ([]byte, error) {
sig, err := key.Sign(hash)
if err != nil {
return nil, err
}
// bitcoind checks the bit length of R and S here. The ecdsa signature
// algorithm returns R and S mod N therefore they will be the bitsize of
// the curve, and thus correctly sized.
for i := 0; i < (curve.H+1)*2; i++ {
pk, err := recoverKeyFromSignature(curve, sig, hash, i, true)
if err == nil && pk.X.Cmp(key.X) == 0 && pk.Y.Cmp(key.Y) == 0 {
result := make([]byte, 1, 2*curve.byteSize+1)
result[0] = 27 + byte(i)
if isCompressedKey {
result[0] += 4
}
// Not sure this needs rounding but safer to do so.
curvelen := (curve.BitSize + 7) / 8
// Pad R and S to curvelen if needed.
bytelen := (sig.R.BitLen() + 7) / 8
if bytelen < curvelen {
result = append(result,
make([]byte, curvelen-bytelen)...)
}
result = append(result, sig.R.Bytes()...)
bytelen = (sig.S.BitLen() + 7) / 8
if bytelen < curvelen {
result = append(result,
make([]byte, curvelen-bytelen)...)
}
result = append(result, sig.S.Bytes()...)
return result, nil
}
}
return nil, errors.New("no valid solution for pubkey found")
}
// RecoverCompact verifies the compact signature "signature" of "hash" for the
// Koblitz curve in "curve". If the signature matches then the recovered public
// key will be returned as well as a boolen if the original key was compressed
// or not, else an error will be returned.
func RecoverCompact(curve *KoblitzCurve, signature,
hash []byte) (*PublicKey, bool, error) {
bitlen := (curve.BitSize + 7) / 8
if len(signature) != 1+bitlen*2 {
return nil, false, errors.New("invalid compact signature size")
}
iteration := int((signature[0] - 27) & ^byte(4))
// format is <header byte><bitlen R><bitlen S>
sig := &Signature{
R: new(big.Int).SetBytes(signature[1 : bitlen+1]),
S: new(big.Int).SetBytes(signature[bitlen+1:]),
}
// The iteration used here was encoded
key, err := recoverKeyFromSignature(curve, sig, hash, iteration, false)
if err != nil {
return nil, false, err
}
return key, ((signature[0] - 27) & 4) == 4, nil
}
// signRFC6979 generates a deterministic ECDSA signature according to RFC 6979 and BIP 62.
func signRFC6979(privateKey *PrivateKey, hash []byte) (*Signature, error) {
privkey := privateKey.ToECDSA()
N := order
k := nonceRFC6979(privkey.D, hash)
inv := new(big.Int).ModInverse(k, N)
r, _ := privkey.Curve.ScalarBaseMult(k.Bytes())
if r.Cmp(N) == 1 {
r.Sub(r, N)
}
if r.Sign() == 0 {
return nil, errors.New("calculated R is zero")
}
e := hashToInt(hash, privkey.Curve)
s := new(big.Int).Mul(privkey.D, r)
s.Add(s, e)
s.Mul(s, inv)
s.Mod(s, N)
if s.Cmp(halforder) == 1 {
s.Sub(N, s)
}
if s.Sign() == 0 {
return nil, errors.New("calculated S is zero")
}
return &Signature{R: r, S: s}, nil
}
// nonceRFC6979 generates an ECDSA nonce (`k`) deterministically according to RFC 6979.
// It takes a 32-byte hash as an input and returns 32-byte nonce to be used in ECDSA algorithm.
func nonceRFC6979(privkey *big.Int, hash []byte) *big.Int {
curve := S256()
q := curve.Params().N
x := privkey
alg := sha256.New
qlen := q.BitLen()
holen := alg().Size()
rolen := (qlen + 7) >> 3
bx := append(int2octets(x, rolen), bits2octets(hash, curve, rolen)...)
// Step B
v := bytes.Repeat(oneInitializer, holen)
// Step C (Go zeroes the all allocated memory)
k := make([]byte, holen)
// Step D
k = mac(alg, k, append(append(v, 0x00), bx...))
// Step E
v = mac(alg, k, v)
// Step F
k = mac(alg, k, append(append(v, 0x01), bx...))
// Step G
v = mac(alg, k, v)
// Step H
for {
// Step H1
var t []byte
// Step H2
for len(t)*8 < qlen {
v = mac(alg, k, v)
t = append(t, v...)
}
// Step H3
secret := hashToInt(t, curve)
if secret.Cmp(one) >= 0 && secret.Cmp(q) < 0 {
return secret
}
k = mac(alg, k, append(v, 0x00))
v = mac(alg, k, v)
}
}
// mac returns an HMAC of the given key and message.
func mac(alg func() hash.Hash, k, m []byte) []byte {
h := hmac.New(alg, k)
h.Write(m)
return h.Sum(nil)
}
// https://tools.ietf.org/html/rfc6979#section-2.3.3
func int2octets(v *big.Int, rolen int) []byte {
out := v.Bytes()
// left pad with zeros if it's too short
if len(out) < rolen {
out2 := make([]byte, rolen)
copy(out2[rolen-len(out):], out)
return out2
}
// drop most significant bytes if it's too long
if len(out) > rolen {
out2 := make([]byte, rolen)
copy(out2, out[len(out)-rolen:])
return out2
}
return out
}
// https://tools.ietf.org/html/rfc6979#section-2.3.4
func bits2octets(in []byte, curve elliptic.Curve, rolen int) []byte {
z1 := hashToInt(in, curve)
z2 := new(big.Int).Sub(z1, curve.Params().N)
if z2.Sign() < 0 {
return int2octets(z1, rolen)
}
return int2octets(z2, rolen)
}