rlp: improve decoder stream implementation (#22858)

This commit makes various cleanup changes to rlp.Stream.

* rlp: shrink Stream struct

This removes a lot of unused padding space in Stream by reordering the
fields. The size of Stream changes from 120 bytes to 88 bytes. Stream
instances are internally cached and reused using sync.Pool, so this does
not improve performance.

* rlp: simplify list stack

The list stack kept track of the size of the current list context as
well as the current offset into it. The size had to be stored in the
stack in order to subtract it from the remaining bytes of any enclosing
list in ListEnd. It seems that this can be implemented in a simpler
way: just subtract the size from the enclosing list context in List instead.

rlp/decode.go

@@ -518,7 +518,7 @@ func decodeDecoder(s *Stream, val reflect.Value) error {
 }
 
 // Kind represents the kind of value contained in an RLP stream.
-type Kind int
+type Kind int8
 
 const (
 	Byte Kind = iota
@@ -561,22 +561,16 @@ type ByteReader interface {
 type Stream struct {
 	r ByteReader
 
-	// number of bytes remaining to be read from r.
-	remaining uint64
-	limited   bool
-
-	// auxiliary buffer for integer decoding
-	uintbuf []byte
-
-	kind    Kind   // kind of value ahead
+	remaining uint64   // number of bytes remaining to be read from r
 	size      uint64   // size of value ahead
-	byteval byte   // value of single byte in type tag
 	kinderr   error    // error from last readKind
-	stack   []listpos
+	stack     []uint64 // list sizes
+	uintbuf   [8]byte  // auxiliary buffer for integer decoding
+	kind      Kind     // kind of value ahead
+	byteval   byte     // value of single byte in type tag
+	limited   bool     // true if input limit is in effect
 }
 
-type listpos struct{ pos, size uint64 }
-
 // NewStream creates a new decoding stream reading from r.
 //
 // If r implements the ByteReader interface, Stream will
@@ -646,8 +640,8 @@ func (s *Stream) Raw() ([]byte, error) {
 		s.kind = -1 // rearm Kind
 		return []byte{s.byteval}, nil
 	}
-	// the original header has already been read and is no longer
-	// available. read content and put a new header in front of it.
+	// The original header has already been read and is no longer
+	// available. Read content and put a new header in front of it.
 	start := headsize(size)
 	buf := make([]byte, uint64(start)+size)
 	if err := s.readFull(buf[start:]); err != nil {
@@ -730,7 +724,14 @@ func (s *Stream) List() (size uint64, err error) {
 	if kind != List {
 		return 0, ErrExpectedList
 	}
-	s.stack = append(s.stack, listpos{0, size})
+
+	// Remove size of inner list from outer list before pushing the new size
+	// onto the stack. This ensures that the remaining outer list size will
+	// be correct after the matching call to ListEnd.
+	if inList, limit := s.listLimit(); inList {
+		s.stack[len(s.stack)-1] = limit - size
+	}
+	s.stack = append(s.stack, size)
 	s.kind = -1
 	s.size = 0
 	return size, nil
@@ -739,17 +740,13 @@ func (s *Stream) List() (size uint64, err error) {
 // ListEnd returns to the enclosing list.
 // The input reader must be positioned at the end of a list.
 func (s *Stream) ListEnd() error {
-	if len(s.stack) == 0 {
+	// Ensure that no more data is remaining in the current list.
+	if inList, listLimit := s.listLimit(); !inList {
 		return errNotInList
-	}
-	tos := s.stack[len(s.stack)-1]
-	if tos.pos != tos.size {
+	} else if listLimit > 0 {
 		return errNotAtEOL
 	}
 	s.stack = s.stack[:len(s.stack)-1] // pop
-	if len(s.stack) > 0 {
-		s.stack[len(s.stack)-1].pos += tos.size
-	}
 	s.kind = -1
 	s.size = 0
 	return nil
@@ -777,7 +774,7 @@ func (s *Stream) Decode(val interface{}) error {
 
 	err = decoder(s, rval.Elem())
 	if decErr, ok := err.(*decodeError); ok && len(decErr.ctx) > 0 {
-		// add decode target type to error so context has more meaning
+		// Add decode target type to error so context has more meaning.
 		decErr.ctx = append(decErr.ctx, fmt.Sprint("(", rtyp.Elem(), ")"))
 	}
 	return err
@@ -800,6 +797,9 @@ func (s *Stream) Reset(r io.Reader, inputLimit uint64) {
 		case *bytes.Reader:
 			s.remaining = uint64(br.Len())
 			s.limited = true
+		case *bytes.Buffer:
+			s.remaining = uint64(br.Len())
+			s.limited = true
 		case *strings.Reader:
 			s.remaining = uint64(br.Len())
 			s.limited = true
@@ -818,10 +818,8 @@ func (s *Stream) Reset(r io.Reader, inputLimit uint64) {
 	s.size = 0
 	s.kind = -1
 	s.kinderr = nil
-	if s.uintbuf == nil {
-		s.uintbuf = make([]byte, 8)
-	}
 	s.byteval = 0
+	s.uintbuf = [8]byte{}
 }
 
 // Kind returns the kind and size of the next value in the
@@ -836,35 +834,29 @@ func (s *Stream) Reset(r io.Reader, inputLimit uint64) {
 // the value. Subsequent calls to Kind (until the value is decoded)
 // will not advance the input reader and return cached information.
 func (s *Stream) Kind() (kind Kind, size uint64, err error) {
-	var tos *listpos
-	if len(s.stack) > 0 {
-		tos = &s.stack[len(s.stack)-1]
+	if s.kind >= 0 {
+		return s.kind, s.size, s.kinderr
 	}
-	if s.kind < 0 {
-		s.kinderr = nil
-		// Don't read further if we're at the end of the
-		// innermost list.
-		if tos != nil && tos.pos == tos.size {
+
+	// Check for end of list. This needs to be done here because readKind
+	// checks against the list size, and would return the wrong error.
+	inList, listLimit := s.listLimit()
+	if inList && listLimit == 0 {
 		return 0, 0, EOL
 	}
+	// Read the actual size tag.
 	s.kind, s.size, s.kinderr = s.readKind()
 	if s.kinderr == nil {
-			if tos == nil {
-				// At toplevel, check that the value is smaller
-				// than the remaining input length.
-				if s.limited && s.size > s.remaining {
-					s.kinderr = ErrValueTooLarge
-				}
-			} else {
-				// Inside a list, check that the value doesn't overflow the list.
-				if s.size > tos.size-tos.pos {
+		// Check the data size of the value ahead against input limits. This
+		// is done here because many decoders require allocating an input
+		// buffer matching the value size. Checking it here protects those
+		// decoders from inputs declaring very large value size.
+		if inList && s.size > listLimit {
 			s.kinderr = ErrElemTooLarge
+		} else if s.limited && s.size > s.remaining {
+			s.kinderr = ErrValueTooLarge
 		}
 	}
-		}
-	}
-	// Note: this might return a sticky error generated
-	// by an earlier call to readKind.
 	return s.kind, s.size, s.kinderr
 }
 
@@ -891,37 +883,35 @@ func (s *Stream) readKind() (kind Kind, size uint64, err error) {
 		s.byteval = b
 		return Byte, 0, nil
 	case b < 0xB8:
-		// Otherwise, if a string is 0-55 bytes long,
-		// the RLP encoding consists of a single byte with value 0x80 plus the
-		// length of the string followed by the string. The range of the first
-		// byte is thus [0x80, 0xB7].
+		// Otherwise, if a string is 0-55 bytes long, the RLP encoding consists
+		// of a single byte with value 0x80 plus the length of the string
+		// followed by the string. The range of the first byte is thus [0x80, 0xB7].
 		return String, uint64(b - 0x80), nil
 	case b < 0xC0:
-		// If a string is more than 55 bytes long, the
-		// RLP encoding consists of a single byte with value 0xB7 plus the length
-		// of the length of the string in binary form, followed by the length of
-		// the string, followed by the string. For example, a length-1024 string
-		// would be encoded as 0xB90400 followed by the string. The range of
-		// the first byte is thus [0xB8, 0xBF].
+		// If a string is more than 55 bytes long, the RLP encoding consists of a
+		// single byte with value 0xB7 plus the length of the length of the
+		// string in binary form, followed by the length of the string, followed
+		// by the string. For example, a length-1024 string would be encoded as
+		// 0xB90400 followed by the string. The range of the first byte is thus
+		// [0xB8, 0xBF].
 		size, err = s.readUint(b - 0xB7)
 		if err == nil && size < 56 {
 			err = ErrCanonSize
 		}
 		return String, size, err
 	case b < 0xF8:
-		// If the total payload of a list
-		// (i.e. the combined length of all its items) is 0-55 bytes long, the
-		// RLP encoding consists of a single byte with value 0xC0 plus the length
-		// of the list followed by the concatenation of the RLP encodings of the
-		// items. The range of the first byte is thus [0xC0, 0xF7].
+		// If the total payload of a list (i.e. the combined length of all its
+		// items) is 0-55 bytes long, the RLP encoding consists of a single byte
+		// with value 0xC0 plus the length of the list followed by the
+		// concatenation of the RLP encodings of the items. The range of the
+		// first byte is thus [0xC0, 0xF7].
 		return List, uint64(b - 0xC0), nil
 	default:
-		// If the total payload of a list is more than 55 bytes long,
-		// the RLP encoding consists of a single byte with value 0xF7
-		// plus the length of the length of the payload in binary
-		// form, followed by the length of the payload, followed by
-		// the concatenation of the RLP encodings of the items. The
-		// range of the first byte is thus [0xF8, 0xFF].
+		// If the total payload of a list is more than 55 bytes long, the RLP
+		// encoding consists of a single byte with value 0xF7 plus the length of
+		// the length of the payload in binary form, followed by the length of
+		// the payload, followed by the concatenation of the RLP encodings of
+		// the items. The range of the first byte is thus [0xF8, 0xFF].
 		size, err = s.readUint(b - 0xF7)
 		if err == nil && size < 56 {
 			err = ErrCanonSize
@@ -940,22 +930,20 @@ func (s *Stream) readUint(size byte) (uint64, error) {
 		return uint64(b), err
 	default:
 		start := int(8 - size)
-		for i := 0; i < start; i++ {
-			s.uintbuf[i] = 0
-		}
+		s.uintbuf = [8]byte{}
 		if err := s.readFull(s.uintbuf[start:]); err != nil {
 			return 0, err
 		}
 		if s.uintbuf[start] == 0 {
-			// Note: readUint is also used to decode integer
-			// values. The error needs to be adjusted to become
-			// ErrCanonInt in this case.
+			// Note: readUint is also used to decode integer values.
+			// The error needs to be adjusted to become ErrCanonInt in this case.
 			return 0, ErrCanonSize
 		}
-		return binary.BigEndian.Uint64(s.uintbuf), nil
+		return binary.BigEndian.Uint64(s.uintbuf[:]), nil
 	}
 }
 
+// readFull reads into buf from the underlying stream.
 func (s *Stream) readFull(buf []byte) (err error) {
 	if err := s.willRead(uint64(len(buf))); err != nil {
 		return err
@@ -977,6 +965,7 @@ func (s *Stream) readFull(buf []byte) (err error) {
 	return err
 }
 
+// readByte reads a single byte from the underlying stream.
 func (s *Stream) readByte() (byte, error) {
 	if err := s.willRead(1); err != nil {
 		return 0, err
@@ -988,16 +977,16 @@ func (s *Stream) readByte() (byte, error) {
 	return b, err
 }
 
+// willRead is called before any read from the underlying stream. It checks
+// n against size limits, and updates the limits if n doesn't overflow them.
 func (s *Stream) willRead(n uint64) error {
 	s.kind = -1 // rearm Kind
 
-	if len(s.stack) > 0 {
-		// check list overflow
-		tos := s.stack[len(s.stack)-1]
-		if n > tos.size-tos.pos {
+	if inList, limit := s.listLimit(); inList {
+		if n > limit {
 			return ErrElemTooLarge
 		}
-		s.stack[len(s.stack)-1].pos += n
+		s.stack[len(s.stack)-1] = limit - n
 	}
 	if s.limited {
 		if n > s.remaining {
@@ -1007,3 +996,11 @@ func (s *Stream) willRead(n uint64) error {
 	}
 	return nil
 }
+
+// listLimit returns the amount of data remaining in the innermost list.
+func (s *Stream) listLimit() (inList bool, limit uint64) {
+	if len(s.stack) == 0 {
+		return false, 0
+	}
+	return true, s.stack[len(s.stack)-1]
+}