Wnode (whisper node) is a command-line diagnostic tool. It does not have a nice user interface, because its main purpose is diagnostic, and it's meant to be very light-weight rather than beautiful. Wnode might be used for different purposes, including:
@ -13,207 +13,223 @@ Wnode (whisper node) is a command-line diagnostic tool. It does not have a nice
In case an argument is missing, `wnode` will either use the default value or prompt the user at startup. For security reasons, it is not possible to provide passwords in command-line arguments. In `test` mode, a hardcoded password ("test") is used.
#### Flags
`-asym`: use asymmetric encryption in the chat
-asym: use asymmetric encryption in the chat
`-boot`: A string representing the bootstrap node to connect to. For example:
-fileexchange: file exchange mode (send and receive files instead of text messages)
-forwarder: forwarder mode (only forward; neither send nor decrypt messages)
-mailserver: mail server mode (delivers expired messages on demand)
`-dbpath`: The path to the server's DB directory, for incoming messages to be stored
-mailclient: request expired messages from the mail server
`-echo`: prints some arguments for diagnostics
-standalone: don't actively connect to any peers, wait for incoming connections instead
`-fileexchange`: file exchange mode (send and receive files instead of text messages)
-test: use of predefined parameters for diagnostics, including passwords
`-filereader`: load and decrypt messages saved as files, display as plain text
-generatekey: generate a new private key (ECIES) and exit
`-forwarder`: forwarder mode (only forward; neither send nor decrypt messages)
#### Arguments
`-generatekey`: generate and show the private key, and exit
In case of missing arguments wnode will either use default value or ask you to provide them. For security reasons, you can not provide passwords in command-line arguments. Only in test mode hardcoded passwords are used.
`-idfile`: file name containing a node ID (private key) in hexadecimal format
-verbosity:
Verbosity level of logging. Int value between 0 and 5. Default value 1. For example: -verbosity=5.
`-ip`: IP address and port of this node (e.g. 127.0.0.1:30303)
-ttl:
Time-to-live for messages in seconds. Default value 30. For example: -ttl=20.
`-mailclient`: request expired messages from the mail server
-maxsize:
Maximum allowed message size in bytes.
`-mailserver`: mail server mode (delivers expired messages on demand)
-work:
Maximum time in seconds allowed to spend on proof of work in order to achieve the target (set by 'pow' argument).
`maxsize`: max size of message (default 1048576)
-pow:
PoW target for normal messages in float format (e.g. -pow=2.7).
`-mspow`: PoW requirement for Mail Server request (default 0.2)
-mspow:
PoW requirement for Mail Server request.
`-pow`: PoW for normal messages in float format (e.g. 2.7) (default 0.2)
-ip:
IP address and port of this node (e.g. 127.0.0.1:30303).
`-pub`: public key for asymmetric encryption. For example:
-pub:
Public key of your peer (for asymmetric encryption). For example:
File name containing node ID (private key) in hexadecimal string format.
For example: -idfile=/home/vlad/tmp/config
Example of the file content: b3651aff593ef395ee7c16f3ca681830f7d8d0b2729cf472b14f2c4ebe833aa0
`-savedir`: directory where all incoming messages will be saved as files. Only big messages are stored there, except in `fileexchange` mode where all files are stored there.
-boot:
The bootstrap node you want to connect to. For example:
my public key: 0x040ef7acd60781c336c52056b3782f7eae45be2063e591ac6b78472dc27ba770010bde445ffd2f3623ad656f3859e00d11ef518df4916c4d4e258c60b15f34c682 enode://15454fc65bbf0031155f4eee83fa732f1454c314e9f78ade9cba4d4a098d29edbf5431764ee65b200169025c3f900cacc3348a000dda7a8a0d9643d0b7618712@127.0.0.1:30379
Bootstrap Whisper node started
```
After the bootstrap node has started, another local node can connect to it, using the resulting enode:
Now, if you restart you bootstrap node, its enode will be different, because new ID will be randomly generated. If you need to repeat the tests multiple times, it will be extremely boring to copy and paste new enode every time you restart. Instead, you can load ID from file using 'idfile' argument.
Generating ID:
### Persistent ID
> wnode -generatekey
Upon restarting the bootstrap node, its enode will be different, because the ID is randomly generated. For persistence accross restarts, it is possible to specify an ID stored in a file using the 'idfile' argument.
my public key: 0x04be81a00a90f5c21ead8887eaa254b3f7a37e06f8f2d776dcc46954a228bc50c6fb6dfd155f7e44e6fef9b62fdf6dad041759b864d2cbe4089b6f5c16a817ff46 enode://7d13360f5b1ddcf6947f244639113597a863abba0589d2fa5fffb2816ead0acea6211d5778a8be648e45e81ed881f4c1f5c9bbbf0e79065dfb54bcd97de3beab@127.0.0.1:30379
Filter is configured for the topic: 5a4ea131
Bootstrap Whisper node started
```
Now you can always use the same command to connect to your bootstrap node:
The mailserver is only provided as an example for people interested in building their own solution. It is not supported.
Now we will start a chat between two or more nodes sharing the same password, using symmetric encryption. One of the nodes should be started with 'standalone' flag, and another must connect to the first one. It is easy to do on the same machine or on a dedicated server. But what if two peers are behind distinct NAT? In that case, you need a third bootstrap node on a dedicated server, which both peers can connect to. At the time of writing we have out test node with the following enode:
For two nodes to communicate using symmetric encryption, one of them must assume the role of a bootstrap node, and the second one that of the client. The bootstrap node is started with the `standalone` flag, and the client must connect to it. It is easy to do on the same machine or on a dedicated server. But what if two peers are behind distinct NAT? In that case, you need a third bootstrap node on a dedicated server, which both peers can connect to. At the time of writing we have out test node with the following enode:
Then you will be prompted to enter the password for symmetric encryption. From this password symmetric key will be derived. The topic will be derived from the password as well, unless you provide your own (which is strongly encouraged for any meaningful communication):
The user is prompted for the symmetric encryption password. The symmetric key is derived from this password. The topic will be derived from the password as well, unless it's provided by the user on the command line (which is strongly encouraged for any meaningful communication):
You will see your own message successfully decrypted and printed on the screen. The first number (1493061848) is UNIX time in seconds. This format is useful for Mail Client/Server tests. The number in brackets is ID with which the message is signed. In this case -- your own ID. If you see only zeros there, it means the message is not signed, although encrypted with the right key. Another wnode peer will show the same output:
The first number (1493061848) is UNIX timestamp. This format is useful for Mail Client/Server tests. The number in brackets is the ID with which the message is signed. Seeing an ID with only zeros means the message is not signed, although encrypted with the right key. Another `wnode` peer will show the same output:
First line of the output contains the key which should be passed to anther peer, and vice versa. Then you can proceed with the chat as in the previous case.
First line of the output contains the key which should be passed to another peer, and vice versa. Once both clients have entered their peer's public key, the chat session is active.
#### Sending and receiving files
### Sending and receiving files
Start wnode with 'fileexchange' flag, and 'test' flag for simplicity. Suppose we want to store the incoming messages in the directory /home/tester/tmp/msg. In that case:
File exchange is activated with the `fileexchange` flags. Examples here use the `-test` flag for simplicity. Assuming that the incoming messages are to be stored in `/home/tester/tmp/msg`, the resulting command line is:
After you will type and send messages from the second node, you will see the first one to display something like this:
Typing messages in the console of the second node, will cause the first one to display something like this:
```
1493124416 {624fdf6983940c7ffa8a4742f76dc78ae9775c47}: message received and saved as 'aa6f339e830c86718ddf4254038dd9fa8da6494e3f3c856af500a5aeaf0df62d' (4 bytes)
```
As you see, messages are not displayed, but saved instead. Now you can open the file /home/tester/tmp/msg/aa6f339e830c86718ddf4254038dd9fa8da6494e3f3c856af500a5aeaf0df62d and examine its contents.
Messages are not displayed, but saved instead. Examine the contents of `/home/tester/tmp/msg/aa6f339e830c86718ddf4254038dd9fa8da6494e3f3c856af500a5aeaf0df62d` to confirm that the message is saved there.
If you want to send a file from the 'fileexchange' peer, just type the file name. For example:
It is possible to send a file directly by typing its path. For example:
Another peer should receive the message, decrypt and display it on the screen.
If you want to use your own password instead of hardcoded one, just call wnode without 'test' flag.
Of course, you can also switch to asymmetric encryption by providing 'asym' flag.
Asymmetric encryption is also available in file exchange mode by providing the `asym` flag.
#### Mail Server & Client
### Mail Server & Client
Whisper protocol allows you to exchange messages with other peers only if you are online. But what if you go offline? Will important messages be lost forever? The golang implementation of Whisper v6 has a built-in support for Mail Client/Server functionality, which allows to create very secure (and even dark) anonymous email-like system. Wnode is designed to demonstrate the viability of such project.
@ -221,22 +237,31 @@ Mail Server and Client must have direct connection, since they exchange special
Guillaume Ballet
6 years ago
committed by
GitHub