This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
* les: fix crasher in NodeInfo when running as server
The ProtocolManager computes CHT and Bloom trie roots by asking the
indexers for their current head. It tried to get the indexers from
LesOdr, but no LesOdr instance is created in server mode.
Attempt to fix this by moving the indexers, protocol creation and
NodeInfo to a new lesCommons struct which is embedded into both server
and client.
All this setup code should really be cleaned up, but this is just a
hotfix so we have to do that some other time.
* les: fix commons protocol maker
This PR enables the indexers to work in light client mode by
downloading a part of these tries (the Merkle proofs of the last
values of the last known section) in order to be able to add new
values and recalculate subsequent hashes. It also adds CHT data to
NodeInfo.
This PR implements les.freeClientPool. It also adds a simulated clock
in common/mclock, which enables time-sensitive tests to run quickly
and still produce accurate results, and package common/prque which is
a generalised variant of prque that enables removing elements other
than the top one from the queue.
les.freeClientPool implements a client database that limits the
connection time of each client and manages accepting/rejecting
incoming connections and even kicking out some connected clients. The
pool calculates recent usage time for each known client (a value that
increases linearly when the client is connected and decreases
exponentially when not connected). Clients with lower recent usage are
preferred, unknown nodes have the highest priority. Already connected
nodes receive a small bias in their favor in order to avoid accepting
and instantly kicking out clients.
Note: the pool can use any string for client identification. Using
signature keys for that purpose would not make sense when being known
has a negative value for the client. Currently the LES protocol
manager uses IP addresses (without port address) to identify clients.
* les, light: fix CHT trie retrievals
* les, light: minor polishes, test remote CHT retrievals
* les, light: deterministic nodeset rlp, bloombits test skeleton
* les: add an event emission to the les bloombits test
* les: drop dead tester code
This PR implements the new LES protocol version extensions:
* new and more efficient Merkle proofs reply format (when replying to
a multiple Merkle proofs request, we just send a single set of trie
nodes containing all necessary nodes)
* BBT (BloomBitsTrie) works similarly to the existing CHT and contains
the bloombits search data to speed up log searches
* GetTxStatusMsg returns the inclusion position or the
pending/queued/unknown state of a transaction referenced by hash
* an optional signature of new block data (number/hash/td) can be
included in AnnounceMsg to provide an option for "very light
clients" (mobile/embedded devices) to skip expensive Ethash check
and accept multiple signatures of somewhat trusted servers (still a
lot better than trusting a single server completely and retrieving
everything through RPC). The new client mode is not implemented in
this PR, just the protocol extension.
* ethdb: add Putter interface and Has method
* ethdb: improve docs and add IdealBatchSize
* ethdb: remove memory batch lock
Batches are not safe for concurrent use.
* core: use ethdb.Putter for Write* functions
This covers the easy cases.
* core/state: simplify StateSync
* trie: optimize local node check
* ethdb: add ValueSize to Batch
* core: optimize HasHeader check
This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.
* core: write fast sync block data in batches
Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.
* eth/downloader: commit larger state batches
Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.
* core: optimize HasBlock check
This avoids a random database read to get the number.
* core: use numberCache in HasHeader
numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.
* core: write imported block data using a batch
Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.
This commit also removes posting of logs when a forked block is imported.
* core: fix DB write error handling
* ethdb: use RLock for Has
* core: fix HasBlock comment
This commit does various code refactorings:
- generalizes and moves the request retrieval/timeout/resend logic out of LesOdr
(will be used by a subsequent PR)
- reworks the peer management logic so that all services can register with
peerSet to get notified about added/dropped peers (also gets rid of the ugly
getAllPeers callback in requestDistributor)
- moves peerSet, LesOdr, requestDistributor and retrieveManager initialization
out of ProtocolManager because I believe they do not really belong there and the
whole init process was ugly and ad-hoc
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
The transaction pool keeps track of the current nonce in its local pendingState. When a
new block comes in the pendingState is reset. During the reset it fetches multiple times
the current state through the use of the currentState callback. When a second block comes
in during the reset its possible that the state changes during the reset. If that block
holds transactions that are currently in the pool the local pendingState that is used to
determine nonces can get out of sync.
Felföldi Zsolt
Péter Szilágyi
gary rong
b00ris
Felix Lange
Oleg Kovalov
Andrey Petrov
Furkan KAMACI
Miya Chen
Nick Johnson
bas-vk