This fixes a database corruption issue that could occur during state healing.
When sync is aborted while certain modifications were already committed, and a
reorg occurs, the database would contain incorrect trie nodes stored by path.
These nodes need to detected/deleted in order to obtain a complete and fully correct state
after state healing.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This change implements CommitteeChain which is a key component of the beacon light client. It is a passive data structure that can validate, hold and update a chain of beacon light sync committees and updates, starting from a checkpoint that proves the starting committee through a beacon block hash, header and corresponding state. Once synced to the current sync period, CommitteeChain can also validate signed beacon headers.
The dump after state-test didn't work, the problem was an error, "Already committed", which was silently ignored.
This change re-initialises the state, so the dumping works again.
This change
- Removes interface `log.Format`,
- Removes method `log.FormatFunc`,
- unexports `TerminalHandler.TerminalFormat` formatting methods (renamed to `TerminalHandler.format`)
- removes the notion of `log.Lazy` values
The lazy handler was useful in the old log package, since it
could defer the evaluation of costly attributes until later in the
log pipeline: thus, if the logging was done at 'Trace', we could
skip evaluation if logging only was set to 'Info'.
With the move to slog, this way of deferring evaluation is no longer
needed, since slog introduced 'Enabled': the caller can thus do
the evaluate-or-not decision at the callsite, which is much more
straight-forward than dealing with lazy reflect-based evaluation.
Also, lazy evaluation would not work with 'native' slog, as in, these
two statements would be evaluated differently:
```golang
log.Info("foo", "my lazy", lazyObj)
slog.Info("foo", "my lazy", lazyObj)
```
These changes improves the performance of the non-coloured terminal formatting, _quite a lot_.
```
name old time/op new time/op delta
TerminalHandler-8 10.2µs ±15% 5.4µs ± 9% -47.02% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
TerminalHandler-8 2.17kB ± 0% 0.40kB ± 0% -81.46% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
TerminalHandler-8 33.0 ± 0% 5.0 ± 0% -84.85% (p=0.008 n=5+5)
```
I tried to _somewhat_ organize the commits, but the it might still be a bit chaotic. Some core insights:
- The function `terminalHandler.Handl` uses a mutex, and writes all output immediately to 'upstream'. Thus, it can reuse a scratch-buffer every time.
- This buffer can be propagated internally, making all the internal formatters either write directly to it,
- OR, make use of the `tmp := buf.AvailableBuffer()` in some cases, where a byte buffer "extra capacity" can be temporarily used.
- The `slog` package uses `Attr` by value. It makes sense to minimize operating on them, since iterating / collecting into a new slice, iterating again etc causes copy-on-heap. Better to operate on them only once.
- If we want to do padding, it's better to copy from a constant `space`-buffer than to invoke `bytes.Repeat` every single time.
Add read locking of db lock around access to dirties cache in hashdb.Database to prevent
data race versus hashdb.Database.dereference which can modify the dirities map by deleting
an item.
Fixes#28541
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR replaces Geth's logger package (a fork of [log15](https://github.com/inconshreveable/log15)) with an implementation using slog, a logging library included as part of the Go standard library as of Go1.21.
Main changes are as follows:
* removes any log handlers that were unused in the Geth codebase.
* Json, logfmt, and terminal formatters are now slog handlers.
* Verbosity level constants are changed to match slog constant values. Internal translation is done to make this opaque to the user and backwards compatible with existing `--verbosity` and `--vmodule` options.
* `--log.backtraceat` and `--log.debug` are removed.
The external-facing API is largely the same as the existing Geth logger. Logger method signatures remain unchanged.
A small semantic difference is that a `Handler` can only be set once per `Logger` and not changed dynamically. This just means that a new logger must be instantiated every time the handler of the root logger is changed.
----
For users of the `go-ethereum/log` module. If you were using this module for your own project, you will need to change the initialization. If you previously did
```golang
log.Root().SetHandler(log.LvlFilterHandler(log.LvlInfo, log.StreamHandler(os.Stderr, log.TerminalFormat(true))))
```
You now instead need to do
```golang
log.SetDefault(log.NewLogger(log.NewTerminalHandlerWithLevel(os.Stderr, log.LevelInfo, true)))
```
See more about reasoning here: https://github.com/ethereum/go-ethereum/issues/28558#issuecomment-1820606613
* eth/gasestimator: early exit for plain transfer and error allowance
* core, eth/gasestimator: hard guess at a possible required gas
* internal/ethapi: update estimation tests with the error ratio
* eth/gasestimator: I hate you linter
* graphql: fix gas estimation test
---------
Co-authored-by: Oren <orenyomtov@users.noreply.github.com>
This change fixes two type-inconsistencies in the JS tracer:
- In most places we return byte arrays as a `Uint8Array` to the tracer. However it seems we missed doing the conversion for `ctx` fields which are passed to the tracer during `result`. They are passed as simple arrays. I think Uint8Arrays are more suitable and we should change this inconsistency. Note: this will be a breaking-change. But I believe the effect is small. If we look at our tracers we see that these fields (`ctx.from`, `ctx.to`, etc.) are used in 2 ways. Passed to `toHex` which takes both array or buffer. Or the length was measured which is the same for both types.
- The `slice` taking in `int, int` params versus `memory.slice` taking `int64, int64` params. I suggest changing `slice` types to `int64`. This should have no effect almost in any case.
There were several problems related to dumping state.
- If a preimage was missing, even if we had set the `OnlyWithAddresses` to `false`, to export them anyway, the way the mapping was constructed (using `common.Address` as key) made the entries get lost anyway. Concerns both state- and blockchain tests.
- Blockchain test execution was not configured to store preimages.
This changes makes it so that the block test executor takes a callback, just like the state test executor already does. This callback can be used to examine the post-execution state, e.g. to aid debugging of test failures.
* cmd, les, tests: remove light client code
This commit removes the light client (LES) code.
Since the merge the light client has been broken and
it is hard to maintain it alongside the normal client.
We decided it would be best to remove it for now and
maybe rework and reintroduce it in the future.
* cmd, eth: remove some more mentions of light mode
* cmd: re-add flags and mark as deprecated
* cmd: warn the user about deprecated flags
* eth: better error message
Adds a subcommand: `geth snapshot export-preimages`, to export preimages of every hash found during a snapshot enumeration: that is, it exports _only the active state_, and not _all_ preimages that have been used but are no longer part of the state.
This tool is needed for the verkle transition, in order to distribute the preimages needed for the conversion. Since only the 'active' preimages are exported, the output is shrunk from ~70GB to ~4GB.
The order of the output is the order used by the snapshot enumeration, which avoids database thrashing. However, it also means that storage-slot preimages are not deduplicated.
geth --dev can be used with an existing data directory and genesis block. Since
dev mode only works with PoS, we need to verify that the merge has happened.
Co-authored-by: Felix Lange <fjl@twurst.com>
It turns out that encoding json.RawMessage is slow because
package json basically parses the message again to ensure it is valid.
We can avoid the slowdown by encoding the entire RPC notification once,
which yields a 30% speedup.
* rpc: make subscription test faster
reduces time for TestClientSubscriptionChannelClose
from 25 sec to < 1 sec.
* trie: cache trie nodes for faster sanity check
This reduces the time spent on TestIncompleteSyncHash
from ~25s to ~16s.
* core/forkid: speed up validation test
This takes the validation test from > 5s to sub 1 sec
* core/state: improve snapshot test run
brings the time for TestSnapshotRandom from 13s down to 6s
* accounts/keystore: improve keyfile test
This removes some unnecessary waits and reduces the
runtime of TestUpdatedKeyfileContents from 5 to 3 seconds
* trie: remove resolver
* trie: only check ~5% of all trie nodes
Ursulafe
ucwong
Ford
Ng Wei Han
rjl493456442
Péter Szilágyi
Felföldi Zsolt
Martin HS
Marius Kjærstad
Guillaume Ballet
Marius van der Wijden
Håvard Anda Estensen
Manav Darji
BorkBorked
ddl
Delweng
Maciej Kulawik
jwasinger
Jakub Freebit
Sina Mahmoodi
Shivam Sandbhor
lightclient
Mikel Cortes
Felix Lange
Mario Vega