Deploy & Run

The Deploy & Run module allows you to send transactions to the current environment.

To get to the Run & Deploy module - click the run icon in the icon panel.

In order to use this module you need to have a contract compiled. So, if there is a contract name in the contract select box (in the image below it's the pulldown that says Ballot), then you can interact with this contract. If nothing is there - then you need to select a contract. And you do that by clicking the file in the editor panel to make it the active tab ( in the image below - on the right side of the page - in the main panel - you see the ballot.sol so it is the active contract). Once its active, then go to the compiler module and compile it. Then come back to Deploy & Run.

Run Setup

The following settings allow you to directly influence the transaction execution:

Environment:

JavaScript VM: All the transactions will be executed in a sandbox blockchain in the browser. This means nothing will be persisted when you reload the page. The JsVM is its own blockchain and on each reload it will start a new blockchain, the old one will not be saved.
Injected Provider: Remix will connect to an injected web3 provider. Metamask is an example of a provider that inject web3.
Web3 Provider: Remix will connect to a remote node. You will need to provide the URL to the selected provider: geth, parity or any Ethereum client.

Account:

Account: the list of accounts associated with the current environment (and their associated balances). On the JsVM, you have a choice of 5 accounts. If using Injected Web3 with MetaMask, you need to change the account in MetaMask.

Gas Limit:

This sets the maximum amount of gas that will be allowed for all the transactions created in Remix.

Value:

This sets the amount of ETH, WEI, GWEI etc that is sent to a contract or a payable function. ( Note: payable functions have a red button). The value is always reset to 0 after each transaction execution).

Initiate Instance

In the image above the select box is set to Ballot. This select box will contain the list of compiled contracts.
Deploy send a transaction that deploys the selected contract. When the transaction is mined, the newly created instance will be added (this might take several seconds). Note that if the constructor has parameters, you need to specify them.
At Address this is used at access a contract that has already been deployed. It assumes that the given address is an instance of the selected contract. Note: There's no check at this point, so be careful when using this feature, and be sure you trust the contract at that address.

Pending Instances

Validating a transaction takes several seconds. During this time, the GUI shows it in a pending mode. When the transaction is mined the number of pending transactions is updated and the transaction is added to the log (see terminal).

Using the ABI

Using Deploy or At Address is a classic use case of Remix. However, it is possible to interact with a contract by using its ABI. The ABI is a JSON array which describe its interface.

To interact with a contract using the ABI, create a new file in Remix with extension *.abi and copy the ABI content to it. Then, in the input next to At Address, put the Address of the contract you want to interact with. Click on At Address, a new "connection" with the contract will popup below.

Using the Recorder

The Recorder is a tool used to save a bunch of transactions in a JSON file and rerun them later either in the same environment or in another.

Saving to the JSON file ( by default its called senario.json) allows one to easily check the transaction list, tweak input parameters, change linked library, etc...

There are many use cases for the recorder.

For instance:

After having coded and tested contracts in a constrained environment (like the JavaScript VM), you could then change the environment and redeploy it to a more realistic environment like a test net with an injected web3 or to a Geth node. By using the generated senario.json file, you will be using all the same settings that you used in the Javascript VM. And this mean that you won't need to click the interface 100 times or whatever to get the state that you achieved originally. So the recorder could be a tool to protect your sanity.

You can also change the settings in the senario.json file to customize the playback.
Deploying contract does often require more than creating one transaction and so the recorder will automate this deployment.
Working in a dev environment often requires to setup the state in a first place.

senario.json

To create this file in the recorder, you first of course need to have run some transactions. In the image above - it has a 0 next to Transactions Recorded. So this isn't the right moment to save transactions because - well because there aren't any. Each time you make a transaction, that number will increment. Then when you are ready, click the floppy disk icon and the senario.json file will be created.

The JSON file below is an example of the senario.json file.

In it, 3 transactions are executed:

The first corresponds to the deployment of the lib testLib.

The second corresponds to the deployment of the contract test with the first parameter of the constructor set to 11. That contract depends on a library. The linkage is done using the property linkReferences. In that case we use the address of the previously created library : created{1512830014773}. The number is the id (timestamp) of the transaction that led to the creation of the library.

The third record corresponds to the call to the function set of the contract test (the property to is set to: created{1512830015080}) . Input parameters are 1 and 0xca35b7d915458ef540ade6068dfe2f44e8fa733c

All these transactions are created using the value of the accounts account{0}.

{
"accounts": {
    "account{0}": "0xca35b7d915458ef540ade6068dfe2f44e8fa733c"
},
"linkReferences": {
    "testLib": "created{1512830014773}"
},
"transactions": [
    {
    "timestamp": 1512830014773,
    "record": {
        "value": "0",
        "parameters": [],
        "abi": "0xbc36789e7a1e281436464229828f817d6612f7b477d66591ff96a9e064bcc98a",
        "contractName": "testLib",
        "bytecode": "60606040523415600e57600080fd5b60968061001c6000396000f300606060405260043610603f576000357c0100000000000000000000000000000000000000000000000000000000900463ffffffff1680636d4ce63c146044575b600080fd5b604a6060565b6040518082815260200191505060405180910390f35b6000610d809050905600a165627a7a7230582022d123b15248b8176151f8d45c2dc132063bcc9bb8d5cd652aea7efae362c8050029",
        "linkReferences": {},
        "type": "constructor",
        "from": "account{0}"
    }
    },
    {
    "timestamp": 1512830015080,
    "record": {
        "value": "100",
        "parameters": [
        11
        ],
        "abi": "0xc41589e7559804ea4a2080dad19d876a024ccb05117835447d72ce08c1d020ec",
        "contractName": "test",
        "bytecode": "60606040526040516020806102b183398101604052808051906020019091905050806000819055505061027a806100376000396000f300606060405260043610610062576000357c0100000000000000000000000000000000000000000000000000000000900463ffffffff1680632f30c6f61461006757806338cc48311461009e57806362738998146100f357806387cc10e11461011c575b600080fd5b61009c600480803590602001909190803573ffffffffffffffffffffffffffffffffffffffff16906020019091905050610145565b005b34156100a957600080fd5b6100b1610191565b604051808273ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff16815260200191505060405180910390f35b34156100fe57600080fd5b6101066101bb565b6040518082815260200191505060405180910390f35b341561012757600080fd5b61012f6101c4565b6040518082815260200191505060405180910390f35b8160008190555080600160006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff1602179055505050565b6000600160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16905090565b60008054905090565b600073__browser/ballot.sol:testLib____________636d4ce63c6000604051602001526040518163ffffffff167c010000000000000000000000000000000000000000000000000000000002815260040160206040518083038186803b151561022e57600080fd5b6102c65a03f4151561023f57600080fd5b505050604051805190509050905600a165627a7a72305820e0b2510bb2890a0334bfe5613d96db3e72442e63b514cdeaee8fc2c6bbd19d3a0029",
        "linkReferences": {
        "browser/ballot.sol": {
            "testLib": [
            {
                "length": 20,
                "start": 511
            }
            ]
        }
        },
        "name": "",
        "type": "constructor",
        "from": "account{0}"
    }
    },
    {
    "timestamp": 1512830034180,
    "record": {
        "value": "1000000000000000000",
        "parameters": [
        1,
        "0xca35b7d915458ef540ade6068dfe2f44e8fa733c"
        ],
        "to": "created{1512830015080}",
        "abi": "0xc41589e7559804ea4a2080dad19d876a024ccb05117835447d72ce08c1d020ec",
        "name": "set",
        "type": "function",
        "from": "account{0}"
    }
    }
],
"abis": {
    "0xbc36789e7a1e281436464229828f817d6612f7b477d66591ff96a9e064bcc98a": [
    {
        "constant": true,
        "inputs": [],
        "name": "get",
        "outputs": [
        {
            "name": "",
            "type": "uint256"
        }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    }
    ],
    "0xc41589e7559804ea4a2080dad19d876a024ccb05117835447d72ce08c1d020ec": [
    {
        "constant": true,
        "inputs": [],
        "name": "getInt",
        "outputs": [
        {
            "name": "",
            "type": "uint256"
        }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": true,
        "inputs": [],
        "name": "getFromLib",
        "outputs": [
        {
            "name": "",
            "type": "uint256"
        }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": true,
        "inputs": [],
        "name": "getAddress",
        "outputs": [
        {
            "name": "",
            "type": "address"
        }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": false,
        "inputs": [
        {
            "name": "_t",
            "type": "uint256"
        },
        {
            "name": "_add",
            "type": "address"
        }
        ],
        "name": "set",
        "outputs": [],
        "payable": true,
        "stateMutability": "payable",
        "type": "function"
    },
    {
        "inputs": [
        {
            "name": "_r",
            "type": "uint256"
        }
        ],
        "payable": true,
        "stateMutability": "payable",
        "type": "constructor"
    }
    ]
}
}

11 KiB Raw Blame History