remix-project/apps/remix-ide/docs/static_analysis.md

Solidity Static Analysis

Static code analysis is a process to debug the code by examining it and without actually executing the code.

Solidity Static Analysis plugin performs static analysis on Solidity smart contracts once they are compiled. It checks for security vulnerabilities and bad development practices, among other issues. This plugin comes with Solidity environment of Remix IDE. It can also be activated individually from Plugin Manager.

How to use

If you select this plugin, you will see a number of modules listed along with checkboxes, one Auto run checkbox and a Run button.

By default, all modules are selected for analysis and a new analysis is performed at each compilation.

One can select/deselect the modules under which contract should be analyzed and can run the analysis again for last compiled contract by clicking on Run.

If you don't want to run analysis each time you compile a contract, just uncheck the checkbox near to Auto run.

Analysis Modules

Currently, with Remix IDE v0.10.1, there are 21 analysis modules listed under 4 categories. Categories are: Security, Gas & Economy, ERC & Miscellaneous.

Here is the list of modules under each category along with the example code which should be avoided or used very carefully while development:

Category: Security

• Transaction origin: 'tx.origin' is used

tx.origin is useful only in very exceptional cases. If you use it for authentication, you usually want to replace it by "msg.sender", because otherwise any contract you call can act on your behalf.

Example:

require(tx.origin == owner);

• Check effects: Potential reentrancy bugs

Potential Violation of Checks-Effects-Interaction pattern can lead to re-entrancy vulnerability.

Example:

// sending ether first
msg.sender.transfer(amount);

// updating state afterwards
balances[msg.sender] -= amount;

• Inline assembly: Inline assembly used

Use of inline assembly is advised only in rare cases.

Example:

assembly {
            // retrieve the size of the code, this needs assembly
            let size := extcodesize(_addr)
}

• Block timestamp: Semantics maybe unclear

now does not mean current time. now is an alias for block.timestamp. block.timestamp can be influenced by miners to a certain degree, be careful.

Example:

// using now for date comparison
if(startDate > now)
    isStarted = true;

// using block.timestamp
uint c = block.timestamp;

• Low level calls: Semantics maybe unclear

Use of low level call, callcode or delegatecall should be avoided whenever possible. send does not throw an exception when not successful, make sure you deal with the failure case accordingly. Use transfer whenever failure of the ether transfer should rollback the whole transaction.

Example:

x.call('something');
x.send(1 wei);

• Blockhash usage: Semantics maybe unclear

blockhash is used to access the last 256 block hashes. A miner computes the block hash by "summing up" the information in the current block mined. By summing up the information in a clever way a miner can try to influence the outcome of a transaction in the current block.

Example:

bytes32 b = blockhash(100);

• Selfdestruct: Beware of caller contracts

selfdestruct can block calling contracts unexpectedly. Be especially careful if this contract is planned to be used by other contracts (i.e. library contracts, interactions). Selfdestruction of the callee contract can leave callers in an inoperable state.

Example:

selfdestruct(address(0x123abc..));

Category: Gas & Economy

• Gas costs: Too high gas requirement of functions

If the gas requirement of a function is higher than the block gas limit, it cannot be executed. Please avoid loops in your functions or actions that modify large areas of storage

Example:

for (uint8 proposal = 0; proposal < proposals.length; proposal++) {
    if (proposals[proposal].voteCount > winningVoteCount) {
        winningVoteCount = proposals[proposal].voteCount;
        winningProposal = proposal;
    }
}

• This on local calls: Invocation of local functions via 'this'

Never use this to call functions in the same contract, it only consumes more gas than normal local calls.

Example:

contract test {
    
    function callb() public {
        address x;
        this.b(x);
    }
    
    function b(address a) public returns (bool) {}
}

• Delete on dynamic Array: Use require/assert appropriately

The delete operation when applied to a dynamically sized array in Solidity generates code to delete each of the elements contained. If the array is large, this operation can surpass the block gas limit and raise an OOG exception. Also nested dynamically sized objects can produce the same results.

Example:

contract arr {
    uint[] users;
    function resetState() public{
        delete users;
    }
}

• For loop over dynamic array: Iterations depend on dynamic array's size

Loops that do not have a fixed number of iterations, for example, loops that depend on storage values, have to be used carefully: Due to the block gas limit, transactions can only consume a certain amount of gas. The number of iterations in a loop can grow beyond the block gas limit which can stall the complete contract at a certain point. Additionally, using unbounded loops can incur in a lot of avoidable gas costs. Carefully test how many items at maximum you can pass to such functions to make it successful.

Example:

contract forLoopArr {
    uint[] array;

    function shiftArrItem(uint index) public returns(uint[] memory) {
        for (uint i = index; i < array.length; i++) {
            array[i] = array[i+1];
        }
        return array;
    }
}

• Ether transfer in loop: Transferring Ether in a for/while/do-while loop

Ether payout should not be done in a loop. Due to the block gas limit, transactions can only consume a certain amount of gas. The number of iterations in a loop can grow beyond the block gas limit which can cause the complete contract to be stalled at a certain point. If required, make sure that number of iterations are low and you trust each address involved.

Example:

contract etherTransferInLoop {
    address payable owner;

    function transferInForLoop(uint index) public  {
        for (uint i = index; i < 100; i++) {
            owner.transfer(i);
        }
    }

    function transferInWhileLoop(uint index) public  {
        uint i = index;
        while (i < 100) {
            owner.transfer(i);
            i++;
        }
    }
}

Category: ERC

• ERC20: 'decimals' should be 'uint8'

ERC20 Contracts decimals function should have uint8 as return type.

Example:

contract EIP20 {

    uint public decimals = 12;
}

Category: Miscellaneous

• Constant/View/Pure functions: Potentially constant/view/pure functions

It warns for the methods which potentially should be constant/view/pure but are not.

Example:

function b(address a) public returns (bool) {
        return true;
}

• Similar variable names: Variable names are too similar

It warns on the usage of similar variable names.

Example:

// Variables have very similar names voter and voters.
function giveRightToVote(address voter) public {
    require(voters[voter].weight == 0);
    voters[voter].weight = 1;
}

• No return: Function with 'returns' not returning

It warns for the methods which define a return type but never explicitly return a value.

Example:

function noreturn(string memory _dna) public returns (bool) {
       dna = _dna;
   }

• Guard conditions: Use 'require' and 'assert' appropriately

Use assert(x) if you never ever want x to be false, not in any circumstance (apart from a bug in your code). Use require(x) if x can be false, due to e.g. invalid input or a failing external component.

Example:

assert(a.balance == 0);

• Result not used: The result of an operation not used

A binary operation yields a value that is not used in the following. This is often caused by confusing assignment (=) and comparison (==).

Example:

c == 5;
or
a + b;

• String Length: Bytes length != String length

Bytes and string length are not the same since strings are assumed to be UTF-8 encoded (according to the ABI defintion) therefore one character is not nessesarily encoded in one byte of data.

Example:

function length(string memory a) public pure returns(uint) {
    bytes memory x = bytes(a);

    return x.length;
}

• Delete from dynamic array: 'delete' on an array leaves a gap

Using delete on an array leaves a gap. The length of the array remains the same. If you want to remove the empty position you need to shift items manually and update the length property.

Example:

contract arr {
    uint[] array = [1,2,3];

    function removeAtIndex() public returns (uint[] memory) {
        delete array[1];
        return array;
    }
}

• Data Truncated: Division on int/uint values truncates the result

Division of integer values yields an integer value again. That means e.g. 10 / 100 = 0 instead of 0.1 since the result is an integer again. This does not hold for division of (only) literal values since those yield rational constants.

Example:

function contribute() payable public {
    uint fee = msg.value * uint256(feePercentage / 100);
    fee = msg.value * (p2 / 100);
}

Remix-analyzer

remix-analyzer is the library which works underneath of remix-ide Solidity Static Analysis plugin.

remix-analyzer is an NPM package. It can be used as a library in a solution supporting node.js. Find more information about this type of usage in the remix-analyzer repository